Proel AMP35E, AMP60E USER’S MANUAL

AMP35E
AMP60E

Mixer Amplifiers

96MAN0152-REV.40/19

USER’S MANUAL

MANUALE D’USO

ENGLISH

ITALIANO

2

IMPORTANT SAFETY INSTRUCTIONS

Watch for these symbols:

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the product’s enclosure, that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.

15. Warning: to reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

16. Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as
vases, are placed on the equipment.

17. To completely disconnect this apparatus from the ac mains, disconnect the power supply cord plug from the ac
receptacle.

18. The mains plug of the power supply cord shall remain readily operable.

19. This apparatus contains potentially lethal voltages. To prevent electric shock or hazard, do not remove the
chassis, input module or ac input covers. No user serviceable parts inside. Refer servicing to qualified service
personnel.

20. This owner’s manual should be considered as a part of the product, it must accompany it at all times, and it
needs to be delivered to the new user when this product is sold. In this way the new owner will be aware of all
the installation, operating and safety instructions.

21. This apparatus should only be connected to a power source of type specified in this owner’s manual or on the
unit.

22. You can clean the exterior of the unit with compressed air or with a dry cloth.

23. Don’t clean the unit using solvents like trichloroethylene, thinners, alcohol, or other volatile or flammable
fluids.

24. To reduce the risk, close supervision is necessary when the product is used near children.

3

DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT

This marking shown on the product or its literature, indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly

to promote the sustainable reuse of material resources. Household users should contact either the retailer
where they purchased this product, or their local government office, for details of where and how they can take this
item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

DECLARATION OF CONFORMITY

The product is in compliance with:
EMC Directive 2014/30/EU, LVD Directive 2014/35/EU, RoHS Directive 2011/65/EU and 2015/863/EU,
WEEE Directive 2012/19/EU.

CONDITIONS OF USE

Proel do not accept any liability for damage caused to third parties due to improper installation, use of non-original
spare parts, lack of maintenance, tampering or improper use of this product, including disregard of ascertainable and
applicable safety standards. Proel strongly recommends that this apparatus must be installed taking into consideration
all current National, Federal, State and Local regulations. The product must be installed by qualified personal. Please
contact the manufacturer for further information.

PACKAGING, SHIPPING AND COMPLAINT

This unit package has been submitted to ISTA 1A integrity tests. We suggest you control the unit conditions immediately
after unpacking it.
If any damage is found, immediately advise the dealer. Keep all unit packaging parts to allow inspection.
Proel is not responsible for any damage that occurs during shipment.
Products are sold “delivered ex warehouse” and shipment is at charge and risk of the buyer.
Possible damages to unit should be immediately notified to forwarder. Each complaint for manumitted package should
be done within eight days from product receipt.

WARRANTY AND PRODUCTS RETURN

Proel products have operating warranty and comply their specifications, as stated by manufacturer.
Proel warrants all materials, workmanship and proper operation of this product for a period of two years from the
original date of purchase. If any defects are found in the materials or workmanship or if the product fails to function
properly during the applicable warranty period, the owner should inform about these defects the dealer or the
distributor, providing receipt or invoice of date of purchase and defect detailed description. This warranty does not
extend to damage resulting from improper installation, misuse, neglect or abuse. Proel S.p.A. will verify damage on
returned units, and when the unit has been properly used and warranty is still valid, then the unit will be replaced or
repaired. Proel S.p.A. is not responsible for any "direct damage" or "indirect damage" caused by product defectiveness.

4

IMPORTANT SAFETY INSTRUCTIONS ......................................................................................................... 2

DISPOSAL OF OLD ELECTRICAL & ELECTRONIC EQUIPMENT ....................................................................... 3

DECLARATION OF CONFORMITY ............................................................................................................... 3

CONDITIONS OF USE ................................................................................................................................ 3

PACKAGING, SHIPPING AND COMPLAINT .................................................................................................. 3

WARRANTY AND PRODUCTS RETURN ....................................................................................................... 3

INTRODUCTION ....................................................................................................................................... 5

DESCRIPTION ........................................................................................................................................... 5

MAIN FUNCTIONS .................................................................................................................................... 5

MAIN PANEL OPERATIONS ........................................................................................................................ 5

1 POWER ......................................................................................................................................... 5

2 MASTER ........................................................................................................................................ 5

3 TREBLE.......................................................................................................................................... 6

4 BASS ............................................................................................................................................. 6

5 INPUT 1 ........................................................................................................................................ 6

6 INPUT 2 ........................................................................................................................................ 6

7 AUX .............................................................................................................................................. 6

8 INPUT 1 ........................................................................................................................................ 6

9 MIC/PH/LINE SWITCH for INPUT 1 ................................................................................................. 7

10 INPUT 1 PRIORITY ...................................................................................................................... 7

11 INPUT 2 ..................................................................................................................................... 7

12 MIC/PH/LINE SWITCH for INPUT 2.............................................................................................. 7

13 AUX IN (RCA) ............................................................................................................................. 7

14 LOUDSPEAKERS OUTPUT ........................................................................................................... 7

14.1 Constant impedance line: ....................................................................................................... 8

14.2 Constant voltage line: ............................................................................................................ 8

15 AC~ SOCKET .............................................................................................................................. 8

16 FUSE holder............................................................................................................................... 9

17 MAINS SELECTOR....................................................................................................................... 9

18 CONNECTION EXAMPLE ............................................................................................................. 9

19 TECHNICAL SPECIFICATION ....................................................................................................... 10

5

INTRODUCTION

Thank you for choosing a PROEL product. Please take some time to read this manual to understand all the
features of your system and take advantage of all its performance capabilities. All PROEL products are CE
approved and designed for continuous use in professional applications.

DESCRIPTION

AMP35E and AMP60E are 35W or 60W professional mixer amplifiers with constant voltage (70/100V) or
constant impedance (4/8Ω) output. This new series of power amplifiers has been conceived to fulfil the
needs of a wide range of Commercial Audio installations in the most flexible and professional way. The new
range responds to precise operating criteria and it has been designed and tested to guarantee maximum
reliability in prolonged use.

MAIN FUNCTIONS

• Speakers overload and short-circuit protection circuit

• Led start-up indicator

• Main level control (Master)

• Separated Level Controls for 1÷2 and AUX inputs

• Bass and Treble tone adjustment

• 2 MIC / MIC Phantom 48V / LINE inputs balanced on Euroblock terminals

• 1 AUX Line RCA Input

• MIC 1 Input with priority function

• 4 outputs, two at constant impedance (8/4Ω) and two at constant voltage (70/100V)

MAIN PANEL OPERATIONS

1 POWER

Main switch with LED indicator.

2 MASTER

Main level control.

6

3 TREBLE

The TREBLE control is used to adjust the high frequency band. The treble range is -10 dB to +10 dB.
Turning the knob to the right boosts the corresponding frequency band, while turning to the left
attenuates the band.

4 BASS

The BASS control is used to adjust the low frequency band. The bass range is -10 dB to +10 dB. Turning
the knob to the right boosts the corresponding frequency band, while turning to the left attenuates the
band.

5 INPUT 1

Level control of the signal connected to the input 1, which can be either a microphone or a line level
devise (see further).

6 INPUT 2

Level control of signal connected to the input 2, which can be either a microphone or a line level devise
(see further).

7 AUX

Level control of signal connected to the AUX input.

8 INPUT 1

Balanced or unbalanced input on 3.5mm pitch Euroblock connector.
This input can be used to connect low impedance dynamic microphones (30-600 ohm), condenser

microphones with phantom power supply and audio sources with line level signal output (e.g. radio
tuners, television receivers, media players, etc.).

a) Connection of a Balanced line to the INPUT:

b) Connection of a Unbalanced line to the INPUT: