PROEL AEQ31 User Manual

USER’S MANUAL

GRAPHIC EQUALIZER

AEQ31

1. IMPORTANT SAFETY INSTRUCTIONS

CAUTION: To reduce the risk of electric shock do not remove cover (or back panel). No

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to

This symbol is intended to alert the user of the presence of uninsulated

This symbol is intended to alert the user of the presence of important

INSTRUCTIONS:

All safety and operating instructions should be read before the product is operated.

Retain these instructions:

All safety and operating instructions should be retained for future reference.
This owner’s manual should be considered as a part of the product and it must accompany it
every time, and delivered to the new user when this product is sold. In this way the new owner will
be aware of all the installations, operating and safety instructions.

Heed all warnings:

All warnings on the product and in owner’s manual should be adhered to.
Heed all warnings.

Follow all instructions:

All operating and user’s instructions must be followed.

user serviceable parts inside. Refer servicing to qualified personnel only.

rain or moisture.

dangerous voltage within the product enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.

operating and maintenance (servicing) instruction in the literature
accompanying the appliance. Please carefully read the owner’s manual.

Sentences preceded by symbol contain important safety instruction. Please read it carefully.

DETAILED SAFETY INSTRUCTIONS.

Water and moisture:

This apparatus should not be used near water (i.e. bathtub, kitchen sink, swimming pools,
etc.)

Ventilation:

This apparatus should be placed in position that doesn’t interfere with correct ventilation. This
unit, for example, should not be placed on a bed, sofa cover o similar surfaces that could
cover ventilation openings, or placed in a built-in installation, such a bookcase or a cabinet
that could block air flow trough ventilation openings.

Heat:

This apparatus should be placed away from heat sources, like radiators, heat registers, stoves
or other products (including amplifiers) that produce heat.

Power sources:

• This apparatus should be connected only to power source type specified in this owner’s
manual or on the unit.

• If the supplied AC power cable plug is different from wall socket, please contact an
electrician to change the AC power plug.

Grounding or Polarization:

• All precautions must be observed in order to avoid grounding or polarization defeating.

• Unit metal parts are grounded through the AC power cord.

• If the AC power outlet doesn’t have grounding, consult an electrician for outlet grounding.

Power cord protection:

The power cord should be routed in a way it will not be walked on or pinched by items placed
upon or against it, paying particular attention to cords at plugs, convenience receptacles and
wall outlet.

Cleaning:

• You can clean the unit with a compressed air flow or a wet cloth.

• Don’t clean the unit using solvents like trichloroethylene, thinners, alcohol, or other fluids

with very strong volatility and flammability.

Non use periods:

The unit AC power cord should be unplugged from the outlet if it’s unused for a long period.

Objects or liquid entry inside the unit:

Be careful that no objects fall or liquid is spilled inside the unit through ventilation openings.

Safe power line use:

• Keep firmly the plug and the wall outlet while disconnecting the unit from AC power.

• If you’re not going to use the unit for a long period of time, please unplug the power cord

from AC power outlet.

• To avoid unit power cord damaging, please don’t strain the AC power cable and don’t
bundle it.

• In order to avoid unit power cord damaging, please be sure that the power cord is not
walked on or pinched by heavy objects.

Unit relocation:

Before any unit relocation please control the unit is turned off. The power cord must be
unplugged by the wall outlet, and all the connections wires should be disconnected as well.

Don’t open this unit:

Don’t attempt to open or to repair this unit by yourself. For any problem solution not described
in this owner’s manual, please refer to qualified personnel only or consult us or your National
Distributor. Any improper operation could result in fire or electric shock.

Damages requiring services:

• Don’t attempt to do operations not described in this user’s manual.

• In the following cases please refer to an authorized maintenance center or skilled

personnel:

- When the unit works improperly or it doesn’t work at all.

- If power cord or plug are damaged.

- If liquid has spilled, or objects have fallen into the unit.

- The unit has been exposed to rain.

- The unit doesn’t operate normally o it exhibits a marked change in performance.

- If the product has dropped or it has been damaged in any way.

Maintenance:

IMPORTANT SAFETY INSTRUCTIONS:

The user shouldn’t attempt maintenance operation not described in this user’s manual. Every
maintenance operation should be done by qualified personnel only.

• Install this unit following owner’s manual instructions.

• Don’t install, connect or disconnect power supply when the unit is powered, otherwise

there’s an high risk of electric shock.

• Don’t open the unit, there are no user serviceable parts inside.

• If you detect a particular smell from the unit, please turn it off immediately and disconnect

the AC power cord.

• Don’t block the unit ventilation openings.

• Avoid using this unit in overload for a long period.

• Don’t force commands (switches, controls, etc.)