ProAc studio 140 Brochure

High efficiency, incredible
power and detail, a
speaker with authority

ProAc STUDIO 140

Specification

Height on plinths & spikes 1040mm (41”)

Depth 280mm (11”)

Width 190mm (7

1

⁄2”)

Bass Driver 2 x new 165mm (61⁄2”) ProAc unit with coated cone raised spider assembly

for greater linearity and large shielded magnet assembly.

Tweeter ProAc 25mm (1”) coated silk dome with special coating and inner damping.

Crossover HQ network using the finest components with option for bi-wiring/bi-amping

and utilising oxygen free cable.

Finishes Black Ash, Mahogany, Cherry, Maple

Mode Floor standing with spikes

Recommended Amplifiers 15-250watts

Frequency Response 25hz-30khz

Sensitivity 91db linear for 1 watt at 1 metre

Impedance 8 ohms nominal, minimum 4ohms

Weight 20 kgs each with plinths and spikes

Grill Acoustically transparent crimplene

* Due to our policy of continuous improvement specifications are subject to change without notice.

Highpoint House, Riding Road, Buckingham Road Industrial Estate, Brackley, Northamptonshire NN13 7BE

Telephone [phone] Fax [phone] Website www.proac-loudspeakers.com

ProAc STUDIO 140

Printed in England

At ProAc we pride ourselves on designing and
manufacturing high quality loudspeakers with an open and
natural sound. Although we are aware of changes in the
market place we are not influenced by every new fashion,
and design new models with longevity in mind.

The Studio 140 is an all new model from ProAc.
This new speaker offers higher efficiency, greater bass
power and a larger sound stage. High build quality and the
normal ProAc refinements are, of course, included as
standard at a very competitive price.

Cabinet/Drive Units

The Studio 140 is effectively damped and has been designed
with a slim baffle which aids dispersion and rigidity. The 2
new bass drivers are floor-ported and feature a new chassis
and motor assembly. This, in conjunction with the floor­porting, gives immense bass power with a fast and tight
nature. A new (25mm) 1” dome tweeter, similar to those
used in our high-end models, takes pride of place at the top
of the Studio 140 cabinet.

The drive units are mated seamlessly by a new crossover
network. This is split to allow bi-amping or bi-wiring. The
Studio 140 is ideal for those requiring greater efficiency,
higher power handling, powerful clean bass and open and
detailed mid range. It achieves all of this together with the
natural sound for which ProAc is renowned.