ProAc Response D-100 Brochure

The imposing new Response D100 takes on the
mantle of flagship model from our legendary
Response Four, which has delighted discerning
audiophiles for the last twelve years.

Only the development of an entirely new generation
of sensitive drive units has allowed the Fours to be
eclipsed – these new drivers produce a much more
dynamic sound with greater efficiency, giving high
sound levels without the need for high output
amplifiers. Good quality valve or Class A transistor
amplifiers with an output as low as 10 watts will
produce fine results.

Tall, slim, deep and elegant, these beautiful
handcrafted cabinets, finished in real wood veneers,
are exceptionally rigid. Cabinet colouration is kept to a
minimum by covering inner surfaces with sound­deadening material, acoustic wadding and the use of
resistive shelving. An entirely new porting system
means that room placement of the cabinets is much
less critical and the 100’s will perform superbly in
rooms of most layouts and sizes.

ProAc RESPONSE D100

ProAc

RESPONSE D100

Awesome power
and detail from a
magnificent new
flagship model

The innovative drive unit layout has ensured greater
dispersion and a seamlessly integrated sound.
Two new professional quality 10” bass drivers are
mounted on the baffle either side of two exciting new
3” midrange units and a one-inch soft dome tweeter.
Married by a complex HQC crossover network and
connected by ProAc oxygen-free copper wiring, this
formidable combination of drive units produces one
of the most coherent and expansive sounds in
modern hi-fi.

The D100’s produce stunning music, effortlessly.
The enhanced sensitivity extracts the tiniest
detail from any recording without brightness or
exaggeration. Greater bandwidth creates a huge
soundstage, drawing in the listener and creating a
concert hall experience, where the loudspeakers
seem to melt from the scene.

Specification

Nominal Impedance 4 ohms

Recommended Amplifiers 10 to 750 watts

Frequency Response 20hz to 30Khz

Sensitivity 92db linear for 1 watt at 1 metre

Bass Driver (2) Professional quality long-throw 10” (254mm) unit with large magnet assembly

and 3” (75mm) ribbon wound voice coil

Midrange Driver (2) Studio quality 3” (75mm) soft dome unit with double suspension

Tweeter ProAc 1” (25mm) soft dome with special surround and front plate

Crossover HQC crossover using dedicated components wired throughout with ProAc multi-

strand oxygen-free copper cable. Split for optional bi-wiring and bi-amping.

Dimensions 65” (1650mm) high on plinths with conical feet

12” (305mm) wide

19” (482mm) deep

Weight 289 lbs (131kg) /cabinet

Mode Floorstanding

Grille Acoustically transparent crimplene

Finish Available in the following real wood veneers: Black Ash, Maple, Mahogany,

Cherry, Yew, Ebony, Bird’s Eye Maple and Burr Oak. Other finishes to special order

* Due to our policy of continuous improvement all specifications are subject to change without notice. Cabinets pictured

are finished in Yew real wood veneer. Since wood is a natural product, both colour and grain patterns may vary.

Highpoint House, Riding Road, Buckingham Road Industrial Estate, Brackley, Northamptonshire NN13 7BE

Telephone [phone] Fax [phone] Website www.proac-loudspeakers.com

ProAc RESPONSE D100

Printed in England