Housed in a rigid and heavily damped enclosure
and loaded by an equalised reflex port, these two
drivers link seamlessly through a refined crossover
network to a specially shielded version of one of
our most expensive dome tweeters. This
exceptional unit delivers extended yet smooth and
detailed high frequency performance.
The overall result is a centre-channel unit which can
handle anything, especially high-output material, in
new or conventional sound media. A perfect
complement to ProAc loudspeakers, it is also
perfectly compatible with other high quality home
theatre loudspeaker systems.
Available in arrange of superb real wood veneers,
the CC Two is available for demonstration through
your nearest ProAc dealer.
Specification
Nominal Impedance 8 ohms
Recommended Amplifiers 25 to 250 watts
Frequency Response 25hz to 30Khz
Sensitivity 88db linear for 1 watt at 1 metre
Bass/Midrange Driver 6
1
⁄2” magnetically shielded units with special voice coil and magnetic system.
Tweeter 1” magnetically shielded silk dome with aircooling.
Crossover Super grade PCB with finest components and multi-stranded branded cable.
Dimensions 28” (710mm) long
10” (254mm) wide
12” (305mm) deep
Weight 46lbs (21kg)
Mode TV/Stand mounted
Grille Acoustically transparent crimplene
Finish Available in the following real wood veneers: Black Ash, Cherry and Mahogany.
Yew available at a premium.
* Due to our policy of continuous improvement specifications are subject to change without notice. Cabinets pictured are finished in Cherry
real wood veneer. Since wood is a natural product both colour and grain patterns may vary.
Highpoint House, Riding Road, Buckingham Road Industrial Estate, Brackley, Northamptonshire NN13 7BE
Telephone 01280 700147 Fax 01280 700148 Website www.proac-loudspeakers.com
ProAc RESPONSE CC TWO
PRINTED IN ENGLAND