ProAc Response 1-SC Brochure

A radical refinement of the internationally acclaimed
Response One ‘S’, the new Response One ‘SC’ takes
miniature loudspeaker performance into a new dimension.

This latest model incorporates a sensational new
bass/midrange unit, manufactured exclusively for
ProAc. This driver features an innovative copper
magnet and phase plug assembly which has produced
startling sonic improvements, particularly in the
midrange. Equally important is the introduction of a
highly damped, completely transparent cone which
marries extreme rigidity to exceptional lightness.
The effect of this unique combination is a dramatic
lowering of distortion together with a flattening and
extension of the frequency response.

Housed in a highly damped cabinet, this dynamic
bass/midrange driver, working in tandem with an
equalised reflex port, produces exceptional bass
extension with greatly enhanced soundstaging and
detail. A modified high quality crossover network
integrates the bass/midrange output smoothly with that

ProAc RESPONSE ONE SC

ProAc

RESPONSE ONE SC

An exciting breakthrough
in miniature loudspeaker
performance

of the dome tweeter, providing seamless reproduction
throughout the entire frequency range. But perhaps the
most important advance has been in the midrange
area. The incorporation of this new bass/midrange
drive unit has resulted in a smooth and expansive
midrange, completely free of any colouration. Indeed,
independent listeners have commented that this is
midrange performance of electrostatic quality.

No expense has been spared in the design and
construction of the Response One ‘SC’. The result is an
outstandingly fast, powerful and accurate delivery
combined with midrange quality seldom experienced
from a box loudspeaker. Finished in a range of
exquisite real wood veneers, the Response One ‘SC’
represents a milestone in compact loudspeaker
performance at the highest level.

The full potential of these thoroughbred designs will
only be realised through the use of the highest quality
partnering equipment.

Specification

Nominal Impedance 8 ohms

Recommended Amplifiers 20 to 100 watts

Frequency Response 38hz to 30Khz

Sensitivity 86db linear for 1 watt at 1 metre

Bass/Midrange Driver New five inch unit with special transparent cone. Copper magnet assembly and

phase plug mounted on die-cast chassis. High temperature voice coil.

Tweeter ProAc three quarter inch dome unit, with honeycomb - wound voice coil.

Special damping and ferrofluid-cooled coil assembly.

Crossover Finest components on dedicated circuit board. Multistrand oxygen-free

copper cable throughout. Split for optional bi-wiring and bi-amping.

Dimensions 12” (305mm) high

7” (178mm) wide

9

1

⁄4” (235mm) deep

Weight 18lbs (8kg)/cabinet

Mode Stand mounted

Grille Acoustically transparent crimplene

Finish Available in the following real wood veneers: Black Ash, Maple, Cherry, Mahogany,

Yew, Ebony, Bird’s Eye Maple

* Due to our policy of continuous improvement specifications are subject to change without notice. Cabinets pictured

are finished in Ebony real wood veneer. Since wood is a natural product both colour and grain patterns may vary.

Highpoint House, Riding Road, Buckingham Road Industrial Estate, Brackley, Northamptonshire NN13 7BE

Telephone [phone] Fax [phone] Website www.proac-loudspeakers.com

ProAc RESPONSE ONE SC

PRINTED IN ENGLAND