! Smart Band AT300
!
!
Wear smart band
1.
Take out host and wristband
!
2.
Insert host to wristband
!
3.
Band to wear the best after ulnar styloid
!
4.
Wearing a smartband
!
Install APP on mobile phone
Scan the the following QR code, download and install APP/APK, or download
“Day Day Band”APK from Google play store for Android system phone or APP
from Apple store for IOS system phone.
!
ON/OFF
Press the button on the left side of the host more than 3 seconds(following
figure),then the band will power-on with vibration, and the screen will be lit up.
!
Turn to the main page, press the button of the left side of the host more than 3
seconds, then the band will be shut down with vibration.
Use Your Band
First use the band, please make sure the band have connected with APK/
APP, then automatic update time, otherwise pedometer and sleep data will not
accurate.
Connect to your mobile phone APP:
Open APP-Scan –Select the band (Bluetooth name AT300)
When band and phone connected successfully, immediately start to record
and analyze your exercise and sleep data, and show the data to APP. When
disconnected, band can show time and sport data on the screen automatically
and can save leaving data up to seven days.
After your band connected to your mobile phone, you can see a BT logo and
battery status switching on the right corner
Steps Distances Calories Burned
(km)
Charging
When the battery on the screen or APP is in lower power status, band
indicates that the power is low, please charge to band immediately, when
charging, please take out the host from wristband. Put charging clip into
charging part of band, and USB part connects to the related plug, you can
charge.
Main Function
Standard sports function (steps, calories, distance)
Automatically Sleep detect (sleep time, sleep quality)
Screen display, time display
Call notification, vibrate reminder
Message reminder
QQ, weChat reminder
Shake remote camera ( remote phone camera take phone by shaking the
band)
Reset to the factory settings
Anti-lost reminder( phone will play music if out of the range)
Smart unlock, smart alarm clock
Raised hand to bright screen
Sports goal setting, sports information sharing
SUOTA online upgrade
Synchronous data to APP / APK
Tips for android user
1.
when using the function of away from alarm, you need to allow the APP
display floating window
2.
when using the function of message reminder, you need to set the APP
allow to be run in background
3.
Suggest that APP is added in the rights management for the trust
Basic parameters
Main body weight: 7.0 g Battery type: Lithium polymer
Battery capacity: 60 mAh Synchronous type: BLE 4.0
Working temperature: -10℃～50℃ waterproof level: IP56
Band Length: about 240mm Display type: 0.49” OLED screen
Wrist band material: Silicone band button material: Zinc alloy
System requirements: android system 4.3 and above, IOS 7.0 and above
Support Bluetooth 4.0 mobile phone
Attentions
1.
Don’t wear in a shower or swimming
2.
Don’t change band battery by yourself
3.
Use original charging line to charge
4.
Please firstly connect band, then sync related data
5.
Don’t exposure band in the high moisture, the high temperature or low
temperature for a long time.
6.
If the band crash reboot phenomenon, please check whether the phone is
out of memory or service is closed, then restart the phone and try again.
Standard configuration
Host X1
Silicone wristband X 1
USB charge clip X 1
Package and User manual X 1
Loading...