GENERAL
OVERVIEW OF THE
PRINCE®TENNIS
BALL MACHINE
The Prince®ball machine manufactured
by Master Sports is a portable, compact,
self-contained unit designed to be
easily handled, transported and stored.
Manufactured from the same material
used in high grade luggage, the Prince
®
ball machine is virtually indestructible. The
exterior is weather and corrosion resistant.
Scientifically engineered and designed,
the Prince
®
ball machine was developed
and tested through the combined efforts
of some of the worlds foremost international tennis authorities.
TESTING PROCEDURES:
To ensure customer satisfaction every
Prince
®
Tennis Ball Machine is tested as
follows:
• Battery is checked and tested to
ensure superior quality.
• Three hoppers of balls are run through
the machine.
• The machine is cleaned and boxed.
Note:
There may be some residual ball
fuzz in your machine as a result of testing.
IMPORTANT
SAFETY
INFORMATION
The Prince®ball machine is specifically
designed to throw tennis balls at a high
rate of speed. To avoid any bodily harm,
please observe the following precautions
at all times:
!
WARNING:
Do not reach or look into
the ball throwing opening without first
turning main power off and only after
all wheels come to a complete stop.
!
WARNING:
Do not place hands or
foreign objects into the ball hopper
while power is on.
!
WARNING:
Never stand closer than
35 feet in front of the ball machine when
power is on. Balls exit at various angles,
0-45 degrees vertical, 14 degrees left,
and 14 degrees right.
!
WARNING:
Use caution with small
children in the area.
!
WARNING:
Only use regulation-sized
tennis balls with this unit. Do not use
oversized tennis balls.
!
WARNING:
Do not use this machine in
the rain or standing water on the court.
1