Prince Castle KLEEN-SKREEN 167 User Manual

OPERATING
INSTRUCTIONS
Kleen-Skreen Model No. 167
WARRANTY
This product is warranted to be free from defects in material and workmanship for (1) one year from date of original installation not to exceed 18 months from date of shipment from our factory. This warranty covers parts only. No labor is covered under the terms of this warranty.
Prince Castle's Kleen-Skreen® and Grill Wiper are part of an extensive line of grill tools designed to make the job of maintaining a griddle fast and easy. The Kleen-Skreen polisher removes grease build-up and burnt food with ease. This tool helps restore grill surface's original shine. Replace­able skreens and pads take only minutes to change.
ORDERING INFORMATION
®
Model Shipping
No. Description Packing Weight
167 Redi-Grill 1 per pkg. 1 lb. (0.45 kg)
Kleen-Skreen
167-1 Skreens Only 12 per pkg. 8 oz. (226.80G)
167-2 Pads Only 4 per pkg. 6 oz. (170.10G)
Prince Castle Inc.
355 East Kehoe Blvd. l Carol Stream, IL 60188
Tel: (630) 462-8800
Toll Free: 1-800-PCASTLE
l Fax: (630) 462-1460
167-501
PARTS
1. Always refer to the Parts List in this manual. Part numbers are needed for reference when ordering.
2. All replacement parts should be purchased from your local Prince Castle Service Agency or your local Prince Castle Distributor.
3. RETURNS: All inoperable warranty parts must be returned to the Service Center.
4. MATERIALS: Prince Castle reserves the right to make suitable substitutions in materials upon their availability.
INSTALLATION
REPLACING OR REVERSING PADS AND SCREENS
1. Set Kleen-Skreen® down and remove screen by lifting holding clips.
2. Wash in hot soapy water.
3. Crease screen about 1/2 on both ends. Set down with pad positioned on top. See figure 1.
figure 1
1. After you have removed the unit from the carton, inspect the unit for signs of damage. If there is damage to the unit:
l Notify carrier within 24 hours after delivery. l Save carton and packing materials for inspection
purposes.
l Contact the Prince Castle Customer Sales
Department at 1-800-722-7853 to arrange for a replacement to be sent.
2. Verify that all parts have been received.
OPERATION
1. Scrape grill first with the Redi-grill® scraper (Model No. 161) available from your Restaurant Equipment Dealer.
2. Place one hand on Kleen-Skreen® handle and the other hand on the guard. Place the Kleen-Skreen flat on the grill. Pressing down on the grill, move the Kleen-Skreen® back and forth over the grill. For more bite tilt the handle so that about half of the screen and the pad are on the grill during motion.
4. Place Kleen-Skreen® handle on pad. Pull back clip and insert screen under clip as shown. See figure 2.
figure 2
5. Turn unit around. Pull back clip and insert other end of screen. See figure 3.
figure 3
®
6. Snug screen against pad by repeating insertions if
required.
Loading...