Prince castle IRT-SB-NA-1PS User Manual

Horizontal Infrared Toaster
Operation Manual
Conveyor
Out-feed Tray
Product Identification
Display and
Touchpad
LCD
Display
LEFT and
RIGHT Scroll
Buons
IRT-SB-NA-1PS
IRT-SB-NA-3PS
MENU
Buon
This product is warranted to be free from defects in material and/or
LIMITED WARRANTY
workmanship for a period of two (2) years from date of original installation, not to exceed 30 months from date of shipment from our factory. Any part or component which proves to be faulty in material and/or workmanship within the warranty period will be replaced or repaired (at the option of Prince Castle, Inc.) without cost to the customer for parts or labor. This warranty is subject to the following exceptions/conditions:
• Use of any non-genuine Prince Castle parts voids this warranty and all work must be performed by an authorized Prince Castle Service Agent.
• All labor shall be performed during regular work hours. Overtime premium will not be covered.
• Travel charges are limited to 200 kilometers (100 miles) round trip, 2 hours travel time, one trip per repair.
• Damage caused by carelessness, neglect, and/or abuse (e.g., using wrong current, dropping, tampering with or altering electrical components, or improper cleaning) is not covered.
• Equipment damaged in shipment, by fire, flood or an act of God is not covered.
• Damage to non-stick coated surfaces is not covered by this war­ranty.
355 East Kehoe Blvd. • Carol Stream, IL 60188 USA
Fax: 630-462-1460 • www.princecastle.com
Product Identification……………………………...….Page 1 Warranty Statement….….………………..………..…Page 1
Table of Contents…….……………….…………....…Page 1
Electrical Specifications.……………….…………..…Page 2 Safe Service Practices.………………………...…..…Page 2 Serial Number Matrix………………………………….Page 2 Installation…...……….…………………….………..…Page 3 Operation…….…………………..……………….…….Page 4
Cleaning…………………………...………………....…Page 6
Display Menu Options…..……………….…..…..…....Page 7
Management Programming…..……….…………..….Page 9 Exploded View and Parts List………………………...Page 12 Troubleshooting Guide………..……….…………..….Page 15
TABLE OF CONTENTS
IRT-SB-NA-1PS 1 Printed in USA 9/15
IRT-SB-NA-3PS 353-566
Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS
Electrical Specicaons
IRT-SB-NA-1PS 200-240VAC, 50/60 Hz, 1 Ph.
IRT-SB-NA-3PS 200-240VAC, 50/60 Hz, 1 Ph.
Disconnect Power
WARNING
Failure to turn off the unit before servicing could result in severe bodily injury or death. Switch the On/Off switch to the Off position before servicing.
Important
Prince Castle reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions, or replacements for previously purchased equip­ment.
Safe Service Pracces
Indicates information important to the proper operation of the unit. Failure to observe may result in damage to the equipment and/or severe bodily injury or death.
Indicates information important to the operation of the unit. Failure to observe may result in damage to the equipment.
This appliance is designed for toasting bread products in a commercial McDonalds kitchen. The dimensions of the bread products as defined by McDonalds.
Do not hose down or use a water jet on the unit. Keep the unit away from running water. Disconnect power cord before perform­ing any cleaning or maintenance.
Equipment must be elevated from the floor at all times during cleaning and operation.
WARNING
CAUTION
GENERAL
CAUTION
CAUTION
Serial Number Matrix
The manufacture date is encoded in the unit’s serial number. The service bench installaon date (used to determine warranty coverage) is considered to be the end of the following month. For example:
Serial Number: FJ0000458 Manufacture Date: June 2014 Service Bench Installaon Date: July 31, 2014
IRT-SB-NA-1PS 2 Printed in USA 9/15
IRT-SB-NA-3PS 353-566
Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS
Unpack and Inspect. Remove the unit from th e car -
1
ton and inspect for signs of damage. If there is damage to the unit:
Notify the carrier within 24 hours of delivery Save carton and packaging materials for inspection
purposes.
Contact your local dealer.
Verify parts. Verify that all parts have been received. When replacing parts use Prince Castle parts only.
2
Horizontal Infrared Toaster Out-Feed Tray In Feed Rack Crumb Tray (Already installed)
Installaon
Install In-Feed Rack . Slid e th e in -feed rack onto 1
5
hook on each side. Ensure the rack is secure before operating the unit.
Install Out-Feed Tray. Insert the Out-Feed Tray onto one hook on each side. Ensure the rack is secure before operating the unit.
Place toaster on a sturdy surface. Remo ve blu e and /
3
or white protective covering prior to powering on.
CAUTION
Two man lift, unit weight is more than 50 lbs.
Plug unit in. Plug un it into a grou nded recep tac le
Follow daily PM procedures.
4
6
with a matching plug configuration.
WARNING
All electrical connections must be in accordance with local electri­cal codes and any other applicable codes.
If the supply cord is damaged, it must be replaced by the manufac­turer, its service agent, or similarly qualified persons in order to avoid hazards.
To prevent an electric shock hazard, this device must be bonded to equipment in close proximity with an equipotential bonding conductor. This device is equipped with grounding lug for this purpose and is marked with the following symbol.
IRT-SB-NA-1PS 3 Printed in USA 9/15
IRT-SB-NA-3PS 353-566
Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS
Operaon
Turn unit ON. Turn th e
1
On/Off switch located on back of toaster to ON. The Prince Castle screen will appear in the display for three seconds. (Ensure the conveyor is fully closed)
Wait through Warm-Up. During Warm-Up, the LCD display
2
will read “WARMING UP”. Warm-Up me, is about 15-20 minutes. Bagel Mode will come up by default
WARMING UP
4
5
BURN/ELECTRICAL SHOCK HAZARD! Toaster can be HOT and can cause severe burns or severe shock. Keep hands and objects out of the toaster unit! Failure to exercise caution may result in serious injury! Turn the unit off, and let it cool down completely before touching or working on internal apparatus.
Watch for Product.
When ready temperature is reached, the LCD display will read “”BAGEL” or “MUFFIN” depending on the mode.
Feeding in Muffins and Bagels. Feed product cut side up in the in feed wire racks shown. Rack will allow 6 muffin or 5 bagels across.
WARNING
- - - - -
BAGEL
Select product to be toasted by touching the button until
3
indicator light illuminates. Note: Conveyor belt will change speed based on product selected.
Muffin = White LED Bagel = Blue LED
Adjusting Toast. For l ig ht er toast, p ress and hol d, ~5
6
seconds, directional key (left) until indicator move to­wards lighter rectangle. For darker toast, repeat with the direction key (right) that points toward the blackened rectangle.
- - - - - -
BAGEL
IRT-SB-NA-1PS 4 Printed in USA 9/15
IRT-SB-NA-3PS 353-566
Horizontal Infrared Toaster
IRT-SB-NA-1PS
IRT-SB-NA-3PS
Remove Stuck Product. Retrieve stuck product
7
by first shutting off the power to the unit. BE CARE­FUL NOT TO CONTACT INTERNAL COMPO­NENTS DURING RETRIEVAL, THEY WILL BE VERY HOT. DO NOT CONTACT HEATING ELE­MENTS DURING RETRIEVAL. DAMAGE MAY OCCUR.
Operaon
IRT-SB-NA-1PS 5 Printed in USA 9/15
IRT-SB-NA-3PS 353-566
Loading...
+ 10 hidden pages