Prince Castle 741-T66H, 741-T88H Operators Manual

OPERATING

INSTRUCTIONS

Slow Cook/Hold Timers
Model No. 741-Series
Horizontal

TABLE OF CONTENTS PAGE

Installation..................................................................... 2

Programming................................................................. 2

Operation ....................................................................... 3

Cleaning ........................................................................ 4

Parts List....................................................................... 4

Exploded View .............................................................. 5

Troubleshooting ............................................................ 5

Wiring Diagrams ........................................................... 6

LIMITED WARRANTY LIMITED WARRANTY

LIMITED WARRANTY

LIMITED WARRANTY LIMITED WARRANTY

This product is warranted to be free from defects in

material and/or workmanship for a period of one

year from date of original installation, not to ex-

ceed 18 months from date of shipment from our

factory.

Pictured Model 741-T88H

Model Description

741-T44H Horizontal Four Channel

741-T66H Horizontal Six Channel

741-T88H Horizontal Eight Channel

ELECTRICAL

741-THCE & THGB Series

230 Volts
50-60 Hz

741-THJ Series

100 Volts

50-60 Hz

Any component which proves to be faulty in material
and/or workmanship will be replaced or repaired (at
the option of Prince Castle, Inc.) without cost to the
customer for parts or labor.

This warranty is subject to the following exceptions/
conditions:

! This equipment is portable, charges for on loca-

tion service (e.g. trip charges and mileage) are
not included in the provisions of this warranty.

! Use of any non-genuine Prince Castle parts

voids this warranty. All genuine Prince Castle
replacement spare parts are warranted for ninety
(90) days from date of purchase.

! All work must be performed by an authorized

Prince Castle Service Agency. Failure to do so
will void this warranty.

! Damage caused by carelessness, neglect, and/

or abuse (e.g., dropping, tampering or altering
parts), equipment damaged in shipment, by fire,
flood or an act of God is not covered under this
warranty.

355 East Kehoe Blvd. ! Carol Stream, IL 60188

Printed in 2005
Prince Castle Inc.

Tel: [phone] ! Fax: [phone]

Toll Free: 1-800-PCASTLE

741-503 rev A

INSTALLATION

1. After you have removed the timer from the carton,
inspect the unit for signs of damage. If there is
damage to the unit:

PRINCE

CASTLE

Activates Program Mode and used to
adjust the alarm sound level.

Logo

PROGRAMMING

! Notify carrier within 24 hours after delivery.

! Save carton and packing materials for inspection

purposes.

! Contact the Prince Castle Customer Sales

Department at 1-800-722-7853 to arrange for
a replacement to be sent.

2. Verify that all parts have been received. Mounting

Brackets and hardware provided.

3. To mount the timer, place mounting brackets in de­sired location. Scribe location of mounting holes,
center punch, and drill holes. Attach timer to mount­ing brackets placing star washer between bracket and
timer.

DISPLAYS AND INDICATORS

TIME

Display

H:M

Shows the time for the selected channel
number.

Indicates the time value is in Hours and
Minutes.

1. Press and hold the PRINCE CASTLE logo for six
seconds. The TIME displays change will from ---­to Prog and a beep will sound.
See figure 1.

Figure 1

Prog

Prog

Prog

Prog

Prog

Prog

2. Press the timer channel to be programmed. The
LED indicator for the selected button will turn
yellow and a beep will sound. The current pro­grammed time for that channel will be displayed in
the TIME display and the time value will indicate
either H:M OR M:S. See figure 2.

Figure 2

M:S

LED

Indicators

Indicates that the time value is in
Minutes and Seconds.

Located above each channel timer
button, these lights change color
depending on the stage of the count­down. Green = first 70% of countdown,
Yellow = next 20% countdown,
Red = last 10% of countdown.

CONTROLS

Channel

(Button)

SCAN/UP

ARROW

SCAN/DOWN

ARROW

Activates countdown sequence in the
run mode.

In the program mode, it increases time
values for each channel . In the Run
Mode, it is used in conjunction with logo
button to increase the volume.

In the program mode, it decreases time
values for each channel . In the run
mode, it is used in conjunction with logo
button to decrease the volume.

3:00

Prog

Prog

Prog

Prog

Prog

3. Press the SCAN/UP Arrow or the SCAN/DOWN
Arrow button to change the program time for the

selected channel.

IMPORTANT: To change from Minutes and Sec­onds M:S to Hours and Minutes H:M. Press and
hold the SCAN/UP Button. When the display
reaches 59:59 it will automatically change to 1:00
Hour and the LED will switch from M:S to H:M.
The program value for the H:M indicator is from
1:00 hour to 17 hours: 59 minutes. See figures 3
and 4.

2