[Type text]
Spout and
Stand Kit
Model 900177
Primo Water Corporation
101 N. Cherry St. Suite 501
Winston-Salem, NC 27101
PN C-054 © 2016
Insert Spout
Remove sticker from top of bottle and place
spout directly into the bottle cap.
Assemble Stand
1. Insert long tubes into end.
2. Attach end and long tubes into adjacent end.
3. Attach curved base to long tube.
4. Attach bottom of curved base to long tube
and snap together.
5. Attach curved base to long tube.
6. Attach bottom of curved base to long tube
and snap together.
7. Turn over place bottle in stand.
Use
1. Place cup, glass or pitcher under spout.
2. Press tab on bottle for water flow.
Cleaning and Care
1. Clean stand with a cloth, mild dishwashing
soap and water.
2. Clean spout in dishwasher.
3. Store disassembled in a clean, dry location.
Questions
For expert advice, call us toll free at
866-429-7566 or visit www.PrimoWater.com
for additional information.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Loading...