Primax Electronics PWP300 User Manual
WP300 Touchpad
a
c
Quick Start
Guide
d
b
Right click AreaLeft click Area
Touchpad Area
Q8103 / First Edition / February 2013
ENGLISH
Package Contents
a
WP300 Touchpad
USB receiver x1
b
AA battery x2
c
d
Quick Start Guide
NOTE: Touchpad gestures
are limited when used with
Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot,
taking note of the correct polarity.
NOTE: The included batteries
are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1.Remove the USB dongle
from underneath the WP300
Touchpad.
NOTE: The USB receiver can
be stored underneath the
touchpad.
2. Insert the USB receiver into
an available USB port on your
notebook or desktop PC.
3.P r e s s th e po wer but t o n
underneath the touchpad to
power on the touchpad.
4. The system will begin pairing
the USB receiver with the
touchpad.
Primary Button and Context Menu
• Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
• Context Menu
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
Status LED Behavior
ON
OFF
Power
Saving Mode
Pairing in
progress
Low power
Battery
empty
Green Powered on.
Off Powered off.
Off
Flashing
green
Flashing
red
Off
To wake up WP300 from Sleep Mode,
click/tap on the touchpad.
The touchpad is connecting to the USB
receiver.
Replace the AA batteries.
No touchpad activity. Replace the AA
batteries.
Touchpad Gestures
1. Finger Slide.
2. Tap/Double Tap
3. Right edge swipe
4. Top edge swipe
5. Left edge swipe
6. Zoom in / Zoom out
Additional Touchpad Gestures
Multi-touch Gestures
2-ngers
3-ngers
4-ngers
5-ngers
Vertical scroll
Horizontal scroll
Brush left / right to go to previous / next page
Brush up / down for Windows® 8™ Start Screen
Brush left / right to go to previous / next track
Brush up / down to increase / decrease volume
Brush up / down to hide / resume desktop
Slide your nger across
the touchpad to move the
pointer.
• In the Start screen, tap once to
launch an app.
•In Desktop mode, double-tap an
item to launch an application.
Swipe from the right edge to
launch the Charms bar.
•In the Start screen, swipe
from the top edge to launch
the All apps bar.
•In a running app, swipe
from the top edge to view
its menu.
Swipe from the left edge to
shufe your running apps.
Spread apart your two
ngers on the touchpad to
zoom out.
Bring together your ngers
on the touchpad to zoom in.
S-CHINESE
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™ operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
•
Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
•
Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep
Mode, click/tap on the touchpad.
4. Pairing in progress - Flashing green - The touchpad is
connecting to the USB receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA
batteries.
Touchpad Gestures
1.
Finger slide: Slide your nger across the touchpad to move the pointer.
2.
Right edge swipe: Swipe from the right edge to launch the Charms bar.
3.
Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.
4.
Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe
from the top edge to view its menu.
5.
Left edge swipe: Swipe from the left edge to shue your running apps.
6.
Zoom in: Spread apart your two ngers on the touchpad.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
3-ngers Brush left / right to go to
4-ngers Brush left / right to go to
5-ngers Brush up / down to hide /
Horizontal scroll
previous / next page
Brush up/down for Windows®
8™ Start Screen
previous / next track
Brush up / down to increase /
decrease volume
resume desktop
S-CHINESE
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™ operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
•
Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
•
Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep
Mode, click/tap on the touchpad.
4. Pairing in progress - Flashing green - The touchpad is
connecting to the USB receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA
batteries.
Touchpad Gestures
1.
Finger slide: Slide your nger across the touchpad to move the pointer.
2.
Right edge swipe: Swipe from the right edge to launch the Charms bar.
3.
Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.
4.
Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe
from the top edge to view its menu.
5.
Left edge swipe: Swipe from the left edge to shue your running apps.
6.
Zoom in: Spread apart your two ngers on the touchpad.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
3-ngers Brush left / right to go to
4-ngers Brush left / right to go to
5-ngers Brush up / down to hide /
Horizontal scroll
previous / next page
Brush up/down for Windows®
8™ Start Screen
previous / next track
Brush up / down to increase /
decrease volume
resume desktop
S-CHINESE
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™ operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
•
Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
•
Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep
Mode, click/tap on the touchpad.
4. Pairing in progress - Flashing green - The touchpad is
connecting to the USB receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA
batteries.
Touchpad Gestures
1.
Finger slide: Slide your nger across the touchpad to move the pointer.
2.
Right edge swipe: Swipe from the right edge to launch the Charms bar.
3.
Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.
4.
Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe
from the top edge to view its menu.
5.
Left edge swipe: Swipe from the left edge to shue your running apps.
6.
Zoom in: Spread apart your two ngers on the touchpad.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
3-ngers Brush left / right to go to
4-ngers Brush left / right to go to
5-ngers Brush up / down to hide /
Horizontal scroll
previous / next page
Brush up/down for Windows®
8™ Start Screen
previous / next track
Brush up / down to increase /
decrease volume
resume desktop
S-CHINESE
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™ operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
•
Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
•
Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep
Mode, click/tap on the touchpad.
4. Pairing in progress - Flashing green - The touchpad is
connecting to the USB receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA
batteries.
Touchpad Gestures
1.
Finger slide: Slide your nger across the touchpad to move the pointer.
2.
Right edge swipe: Swipe from the right edge to launch the Charms bar.
3.
Tap/Double tap: In the Start screen, tap an app to launch it. In Desktop mode, double-tap an item to launch it.
4.
Top edge swipe: In the Start screen, swipe from the top edge to launch the All apps bar. In a running app, swipe
from the top edge to view its menu.
5.
Left edge swipe: Swipe from the left edge to shue your running apps.
6.
Zoom in: Spread apart your two ngers on the touchpad.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
3-ngers Brush left / right to go to
4-ngers Brush left / right to go to
5-ngers Brush up / down to hide /
Horizontal scroll
previous / next page
Brush up/down for Windows®
8™ Start Screen
previous / next track
Brush up / down to increase /
decrease volume
resume desktop
WP300 Touchpad
Q8103 / First Edition / February 2013
ITALIAN
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
•
Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
•
Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Touchpad Gestures
1.
Finger slide: Slide your nger across the
touchpad to move the pointer.
2.
Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3.
Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4.
Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5.
Left edge swipe: Swipe from the left edge
to shue your running apps.
6.
Zoom in: Spread apart your two ngers on
the touchpad.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
3-ngers Brush left / right to go to
4-ngers Brush left / right to go to
5-ngers Brush up / down to hide /
Horizontal scroll
previous / next page
Brush up/down for Windows®
8™ Start Screen
previous / next track
Brush up / down to increase /
decrease volume
resume desktop
ITALIAN
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
•
Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
•
Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Touchpad Gestures
1.
Finger slide: Slide your nger across the
touchpad to move the pointer.
2.
Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3.
Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4.
Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5.
Left edge swipe: Swipe from the left edge
to shue your running apps.
6.
Zoom in: Spread apart your two ngers on
the touchpad.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
3-ngers Brush left / right to go to
4-ngers Brush left / right to go to
5-ngers Brush up / down to hide /
Horizontal scroll
previous / next page
Brush up/down for Windows®
8™ Start Screen
previous / next track
Brush up / down to increase /
decrease volume
resume desktop
ITALIAN
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
•
Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
•
Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Touchpad Gestures
1.
Finger slide: Slide your nger across the
touchpad to move the pointer.
2.
Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3.
Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4.
Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5.
Left edge swipe: Swipe from the left edge
to shue your running apps.
6.
Zoom in: Spread apart your two ngers on
the touchpad.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
3-ngers Brush left / right to go to
4-ngers Brush left / right to go to
5-ngers Brush up / down to hide /
Horizontal scroll
previous / next page
Brush up/down for Windows®
8™ Start Screen
previous / next track
Brush up / down to increase /
decrease volume
resume desktop
ITALIAN
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
•
Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
•
Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Touchpad Gestures
1.
Finger slide: Slide your nger across the
touchpad to move the pointer.
2.
Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3.
Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4.
Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5.
Left edge swipe: Swipe from the left edge
to shue your running apps.
6.
Zoom in: Spread apart your two ngers on
the touchpad.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
3-ngers Brush left / right to go to
4-ngers Brush left / right to go to
5-ngers Brush up / down to hide /
Horizontal scroll
previous / next page
Brush up/down for Windows®
8™ Start Screen
previous / next track
Brush up / down to increase /
decrease volume
resume desktop
ITALIAN
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
•
Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
•
Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Touchpad Gestures
1.
Finger slide: Slide your nger across the
touchpad to move the pointer.
2.
Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3.
Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4.
Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5.
Left edge swipe: Swipe from the left edge
to shue your running apps.
6.
Zoom in: Spread apart your two ngers on
the touchpad.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
3-ngers Brush left / right to go to
4-ngers Brush left / right to go to
5-ngers Brush up / down to hide /
Horizontal scroll
previous / next page
Brush up/down for Windows®
8™ Start Screen
previous / next track
Brush up / down to increase /
decrease volume
resume desktop
ITALIAN
Package Contents
1. WP300 Touchpad.
2. USB receiver x1.
3. AA battery x2
4. Quick Start Guide .
NOTE: Touchpad gestures are limited when used with Windows® Vista / XP / 7™
operating systems.
Installing the batteries
1. Remove the battery cover.
2. Insert the AA batteries into the slot, taking note of the correct polarity.
NOTE: The included batteries are not chargeable.
Setting up your Touchpad with your Desktop or Notebook PC
1. Remove the USB dongle from underneath the WP300 Touchpad.
NOTE: The USB receiver can be stored underneath the touchpad.
2. Insert the USB receiver into an available USB port on your notebook or desktop
PC.
3. Press the power button underneath the touchpad to power on the touchpad.
4. The system will begin pairing the USB receiver with the touchpad.
Primary Button and Context Menu
•
Primary Button
Touchpad and click area: 1-tap with 1 nger
Left click area: 1-click
•
Context Menu Button
Touchpad and click area: 1-tap with 2 ngers
Right click area: 1-click
LED Indicator
1. On - Green - Touchpad powered on.
2. O - O - Touchpad powered o.
3. Power saving mode - O - To wake up WP300 from Sleep Mode, click/tap on the
touchpad.
4. Pairing in progress - Flashing green - The touchpad is connecting to the USB
receiver.
5. Low power - Flashing red - Replace the AA batteries.
6. Battery empty - O - No touchpad activity. Replace the AA batteries.
Touchpad Gestures
1.
Finger slide: Slide your nger across the
touchpad to move the pointer.
2.
Right edge swipe: Swipe from the right
edge to launch the Charms bar.
3.
Tap/Double tap: In the Start screen, tap
an app to launch it. In Desktop mode,
double-tap an item to launch it.
4.
Top edge swipe: In the Start screen, swipe
from the top edge to launch the All apps
bar. In a running app, swipe from the top
edge to view its menu.
5.
Left edge swipe: Swipe from the left edge
to shue your running apps.
6.
Zoom in: Spread apart your two ngers on
the touchpad.
Additional Touchpad Gestures
Fingers Gestures
2-ngers Vertical scroll
3-ngers Brush left / right to go to
4-ngers Brush left / right to go to
5-ngers Brush up / down to hide /
Horizontal scroll
previous / next page
Brush up/down for Windows®
8™ Start Screen
previous / next track
Brush up / down to increase /
decrease volume
resume desktop
Loading...