IMPORTANT: Read before Using
® P10
LASER DISTANCE MEASURE
2 LIMITED
YEARS WARRANTY
www.prexiso-eu.com
Table of Contents
Safety Instructions - - - - - - - - - - - - - - - - 1
Instrument Set-up - - - - - - - - - - - - - - - - - 2
Overview - - - - - - - - - - - - - - - - - - - - - - - - 2 Display - - - - - - - - - - - - - - - - - - - - - - - - - 2 Insert batteries - - - - - - - - - - - - - - - - - - - - 2
Operations - - - - - - - - - - - - - - - - - - - - - - 3
Switching ON/OFF - - - - - - - - - - - - - - - - - - 3 Measuring single distance - - - - - - - - - - - - - 3 Continuous measuring - - - - - - - - - - - - - - - 3
Technical Data - - - - - - - - - - - - - - - - - - - 4 Troubleshooting - - - - - - - - - - - - - - - - - - 4 Care - - - - - - - - - - - - - - - - - - - - - - - - - - - 4 Disposal - - - - - - - - - - - - - - - - - - - - - - - - 4 Warranty- - - - - - - - - - - - - - - - - - - - - - - - 4
Safety Instructions - - - - - - - - - - - - - - - - 5
Symbols used - - - - - - - - - - - - - - - - - - - - - 5 Permitted use - - - - - - - - - - - - - - - - - - - - - 5 Prohibited use- - - - - - - - - - - - - - - - - - - - - 5 Hazards in use - - - - - - - - - - - - - - - - - - - - 5 Limits of use - - - - - - - - - - - - - - - - - - - - - - 5
Areas of responsibility- - - - - - - - - - - - - - - - 6 Electromagnetic Compatibility (EMC) - - - - - - 6 FCC statement (applicable in U.S.) - - - - - - - 6 Laser classification - - - - - - - - - - - - - - - - - 6
EN
Safety Instructions
Do not use the product before you
have studied the User Manual on the enclosed CD or on our Homepage.
If you have no such manual, or it is in the wrong language, please ask your agency for an appropriate copy.
The product is permitted to use for skilled persons only.
CAUTION:
Use of controls or adjustment or performance of procedures other than those specified herein may result in hazardous radiation exposure
WARNING:
•It is a Class 2 laser product in accordance with IEC 60825-1:2014
<1.0mW @ 620-690nm IEC/EN 60825-1: 2014
•Do not attempt to modify the performance of this laser device in any way. This may result in a dangerous exposure to laser radiation.
•Do not operate the tool outdoors.
•Do not attempt to repair or disassemble the laser-measuring tool. If unqualified persons attempt to repair this product, serious injury may occur. Any repair required on this laser product should be performed only by qualified service personnel.
•Do not stare into the laser beam or direct it towards other people unnecessarily.
•Don't dazzle other individuals.
•Looking directly into the beam with optical aids can be hazardous.
•Do not operate the product in explosion hazardous areas or in aggressive environments.
•Only use chargers recommended by the manufacturer to charge the batteries.
•Keep extremities in a safe distance from the moving parts.
•Watch out for erroneous measurements if the product is defective or if it has been dropped or has been misused or modified.
•Carry out periodic test measure-ments. Particularly before, during
and after important measurements.
•The product and batteries must not be disposed of with household waste.
Prexiso P10 |
1 |
EN Instrument Set-up
Overview
The safety instructions and the user manual should be read through carefully before the product is
used for the first time.
The person responsible for the product must ensure that all users understand these directions and adhere to them.
Display
On / Measure /
Continuous
Measuring
Display
Battery |
Units |
Insert batteries
Change
i batteries when battery symbol is flashing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
Prexiso P10 |
|
|
|
||
|
|
|
|
|
|
|
|