electric
Cool-touch Griddle
• Great for every meal: breakfast, lunch, and
dinner.
• Premium nonstick surface for stick-free
cooking and easy cleaning.
• Cool-touch base on the front and both
sides.
Estas instrucciones también están disponibles en español. Para obtener una copia impresa:
• Descargue en formato PDF en www.GoPresto.com/espanol.
• Envíe un correo electrónico a contact@GoPresto.com.
• Llame al 1-800-877-0441, oprima 2 y deje un mensaje.
INSTRUCTIONS
This is a Listed appliance. The following important safeguards are recommended by most portable appliance manufacturers.
IMPORTANT SAFEGUARDS
Visit us on the web at www.GoPresto.com
©2018 National Presto Industries, Inc.
To reduce the risk of personal injury or property damage, when using electrical appliances basic safety precautions should always be
followed, including the following:
1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical shock, do not immerse heat control, cord, or plug in water or other liquid.
4. Close supervision is necessary when any appliance is used by or near children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts and before cleaning
the appliance.
6. Do not operate any appliance with a damaged cord or plug, or in the event the appliance malfunctions or has been damaged in any
manner. Do not operate if the legs and/or cool-touch base become cracked or damaged. Return the appliance to the Presto Factory
Service Department for examination, repair, or electrical or mechanical adjustment.
7. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries. Use only genuine Presto™
accessory and replacement parts.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner or in a heated oven.
11. It is recommended that this appliance not be moved when it contains hot oil or other hot liquid. If it must be moved when it contains
hot oil or other hot liquid, use extreme caution.
12. Always attach heat control to appliance first, then plug cord into wall outlet. To disconnect, turn control to OFF, and then unplug
cord from wall outlet.
13. Do not use appliance for other than intended use.
SAVE THESE INSTRUCTIONS
THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY.
1
Important Cord Information
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit
into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in any way.
A short, detachable power supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord. Extension
cords may be used if care is properly exercised in their use.
If used, the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance. The extension cord should also be arranged so that it will not drape over the table or counter where it can be pulled on by children or tripped over
unintentionally.
Connect the power supply cord to a 120VAC electrical outlet only.
How to Use
Before using for the first time, become familiar with the griddle features. Wash the griddle in warm, soapy water, rinse, and dry. Do not
immerse Control Master® heat control in water or let it come in contact with any liquid.
NOTICE: This griddle is not intended to be used as a warming tray, hot plate, or for heating any cookware. Using this appliance for purposes different from those specified in the instruction manual may cause damage to the appliance and will void the warranty.
1. Place griddle on a dry, level, heat-resistant surface away from walls, cabinets,
and other obstacles.
NOTICE: To prevent possible heat
damage to your countertop, place a
heat-resistant counter protector, such
as aluminum foil, under the griddle.
Take care not to place the foil under the
griddle’s legs.
2. Slide the drip tray into place. Insert the
heat control into the griddle so the two
electrical pins on the griddle are fully
inserted into the heat control. Connect the power cord to a 120VAC electrical wall outlet only.
3. Turn the heat control to desired temperature and preheat the griddle. The pilot light goes off when the selected temperature is reached,
in about 5 to 10 minutes.
NOTE: You may hear a pop or clicking sound while the griddle is preheating. This is normal and due to the expansion of the metal
as it heats. You may also hear this sound as the griddle cools down.
4. Prepare the food for cooking. Because the griddle features a nonstick finish, food may be prepared with little or no oil.
NOTICE: Avoid using no-stick cooking sprays as they may cause the cooking surface to become tacky.
5. Place the food on the griddle and cook according to temperature-timetable on page 3. Adjust the heat according to personal preference
and the particular food being cooked.
During cooking, the pilot light will go on and off to indicate the desired temperature is being maintained.
For best results, use heat-resistant nylon, plastic, wooden, or rubber utensils. Do not use metal utensils as they may scratch the non-
stick surface. Do not cut foods on the cooking surface.
6. Turn the heat control to OFF when cooking is done. Unplug from the wall outlet and then from the griddle. Allow the griddle to cool
before removing the drip tray and before cleaning.
Cool-touch base
Nonstick cooking surface
Drip tray
Control Master
heat control
®
2
Loading...