Presto 07053 Instructions Manual

20-inch Electric Griddle
• Large cooking surface makes enough for the entire family.
• Premium nonstick surface ensures stick-free cooking and easy cleaning.
• Slide-out drip tray for quick cleanup.
• Control Master® heat control maintains the proper cooking temperature automatically.
• Fully immersible with heat control removed.
Visit us on the web at www.GoPresto.com
INSTRUCTIONS
This is a Listed appliance. The following important safeguards are recommended by most portable appliance manufacturers.
Estas instrucciones también están disponibles en español. Para obtener una copia impresa:
• Descargue en formato PDF en www.GoPresto.com/espanol.
• Envíe un correo electrónico a contact@GoPresto.com.
• Llame al 1-800-877-0441, oprima 2 y deje un mensaje.
2017 National Presto Industries, Inc.
IMPORTANT SAFEGUARDS
To reduce the risk of personal injury or property damage when using electrical appliances, basic safety precautions should always be followed, including the following:
1. Read all instructions.
2. Be sure that the handles/leg handle assemblies are assembled and fastened properly before using this appliance. See instructions regarding the handles on page 2.
3. Do not touch hot surfaces. Use handles/leg handle assemblies or knobs.
4. To protect against electrical shock, do not immerse heat control, cord, or plug in water or other liquid.
5. Close supervision is necessary when any appliance is used by or near children.
6. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
7. Do not operate any appliance with a damaged cord or plug, or in the event the appliance malfunctions or has been damaged in any manner. Return appliance to the Presto Factory Service Department for examination, repair, or electrical or mechanical adjustment.
8. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries. Use only genuine Presto accessory attachments or replacement parts.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter or touch hot surfaces.
11. Do not place on or near a hot gas or electric burner or in a heated oven.
12. It is not recommended that this appliance be moved when it contains hot oil or other hot liquid. If it must be moved when it contains hot oil or other hot liquid, use extreme caution.
13. Always attach heat control to appliance first, then plug cord into the wall outlet. To disconnect, turn control to OFF then remove plug from wall outlet.
14. Do not use this appliance for other than intended use.
SAVE THESE INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE ONLY.
1
Important Cord Information
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
A short power supply cord (or cord set) is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Extension cords may be used if care is properly exercised in their use. If an extension cord is used, the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance. The extension cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.
Connect the power supply cord to a 120VAC electrical outlet only.
Before the First Use
Remove all packing material. Set the leg handle assemblies, drip tray, and heat control aside. Wash the griddle in warm, soapy water, rinse, and dry.
Do not immerse the Control Master heat control in water or let it come in contact with any liquid.
Before using this griddle, attach the leg handle assemblies as instructed below:
1. Place the griddle upside down on a table or counter.
2. Using a Phillips screwdriver, remove the four screws from the mounting projections on the griddle.
3. Position the leg handle assemblies on the griddle, lining up the holes in the leg handle assemblies with the mounting projections on the griddle.
4. Replace the screws and fasten securely. When properly assembled, the griddle should sit level. NOTICE: Continuing to tighten, once secure, can result in stripping of screws and cracking of leg handle assemblies.
Nonstick cooking surface
Drip tray
Drip tray tracks
Control Master heat control
How to Use
NOTICE: This griddle is not intended to be used as a warming tray, hot plate, or for heating any cookware. Using this product for purposes different from those specified in the instruction manual may cause damage to the product and will void the product warranty.
1. Place assembled griddle on a dry, level, heat-resistant surface away from walls, cabinets, and other objects.
NOTICE: To prevent possible heat damage to your countertop, place a heat-resistant counter protector, such as aluminum foil, under the griddle; take care not to place the foil under the griddle’s legs.
2. Slide drip tray onto tracks. Insert the Control Master heat control probe into the griddle so the two electrical pins on the griddle are fully inserted into the heat control. Connect the cord to a 120VAC electrical wall outlet only.
3. Turn the heat control to the temperature recommended in the temperature-timetable on page 3 and preheat the griddle. The pilot light will go off when the selected temperature is reached (approximately 5 to 10 minutes).
NOTE: Occasionally you may hear a pop or clicking sound while the griddle is preheating; this is due to the expansion of the metal as it heats. It is normal. You may also notice this sound as the unit cools down.
4. Prepare food for cooking. Because the griddle features a nonstick surface, food may be prepared with little or no oil.
NOTICE: Avoid using no-stick cooking sprays as they may cause the cooking surface to become tacky.
5. Place food on the griddle and cook according to the temperature-timetable on page 3. The heat should be adjusted according to per­sonal preference and the particular food being cooked. During cooking, the pilot light on the heat control will go on and off indicating desired temperature is being maintained.
For best results use heat-resistant nylon, plastic, or wooden utensils. Do not use metal utensils as they may scratch the nonstick surface. Do not cut foods on the cooking surface.
6. Turn the heat control to OFF when cooking is complete. Unplug heat control from wall outlet and then from appliance. Allow the griddle to cool before removing the drip tray and before cleaning.
2
Loading...
+ 2 hidden pages