The company reserves the right to revise this publication or to change its contents without notice. Information contained
herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are
they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication.
This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or
reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publication, except for copies kept by the user for backup purposes.
Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of
their respective companies. They are mentioned for identification purposes only and are not intended as an endorsement
of that product or its manufacturer.
Version 1.0
November 2003
Trademarks
Intel® and Pentium® are registered trademarks of Intel Corporation.
Windows® is a registered trademark of Microsoft Corporation.
Other brand and product names are trademarks and/or registered trademarks of their respective companies.
II
About this Manual
This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and
inspection of personal computers.
It is organized to allow you to look up basic information for servicing and/or upgrading components of the computer.
The following information is included:
Chapter 1, Introduction, provides general information about the location of system elements and their specifications.
Chapter 2, Disassembly, provides step-by-step instructions for disassembling parts and subsystems and how to upgrade
elements of the system.
Appendix A, Part Lists
Appendix B, T2X0C Schematic Diagrams
Appendix C, T2X0V Schematic Diagrams
Preface
Preface
III
Preface
Related Documents
You may also need to consult the following manual for additional information:
User’s Manual on CD
This describes the computer’s features and the procedures for operating the computer and its ROM-based setup program.
It also describes the installation and operation of the utility programs provided with the computer.
This manual covers the information you need to service or upgrade the T200C/T210C/T200D/T210D/T200V/T210V/
T200H/T210H TabletNote computer. Information about operating the computer (e.g. getting started, and the Setup utility) is in the User’s Manual. Information about drivers (e.g. VGA & audio) is also found in User’s Manual. That manual
is shipped with the computer.
Operating systems (e.g. DOS, Windows 9x, Windows NT 4.0, Windows 2000, Windows XP, OS/2 Warp, UNIX, etc.) have
their own manuals as do application software (e.g. word processing and database programs). If you have questions about
those programs, you should consult those manuals.
The T200C/T210C/T200D/T210D/T200V/T210V/T200H/T210H TabletNote computer is designed to be upgradeable.
See “Disassembly” on page 2 - 1 for a detailed description of the upgrade procedures for each specific component.
Please note the warning and safety information indicated by the “” symbol.
The balance of this chapter reviews the computer’s technical specifications and features.
Introduction
1.Introduction
Overview 1 - 1
Introduction
Model Differences
The differences between the model types are indicated in the table and pictures below.
Specifications
1.Introduction
Table 1 - 1
Model
Specifications
Figure 1 - 1
Design Differences
Feature/Model
Processor TypeIntel Pentium® M Intel Pentium® M VIA Antaur VIA Antaur
Touch Panel
Functionality
Supported
T200C
T210C
YesNoYesNo
T200D
T210D
T200V
T210V
T200H
T210H
Designs
T200 SeriesT210 Series
1 - 2 Model Differences
System Specifications T200C/T210C
FeatureSpecification T200C & T210C
Processor TypesIntel Pentium® M Processor (478-pin) Micro-FCPGA
(µ0.13) 0.13 Micron Process Technology, 1MB On-Die L2
Cache & 400MHz Front Side Bus - 1.3/ 1.4/ 1.5/ 1.6/ 1.7
GHz
Introduction
Table 1 - 2
T200C/T210C
System
Specifications
MemoryTwo 200 Pin DDR SODIMM Sockets
Supporting DDR 266 MHz Modules
BIOSACPI 4MB Flash ROM Insyde BIOS
LCD Flat Panel TFT - 14.1" XGA LCD with Built-in Touch Panel and Stylus Pen
Supporting 1024 * 768 dot resolution
LCD Swivel Hinge (allows conversion between Notebook and Tablet Modes)
DisplayIntel Chipset 855GM Integrated Graphics
Shared Video Memory Architecture Supporting up to 32MB (Default Setting 32MB)
StorageEasy Changeable 2.5" 9.5 mm (h) IDE HDD
Supporting Ultra DMA 66/100
AudioIntegrated Direct Sound Audio Compliant with AC’97 2.2
2 Built-In Speakers
Keyboard,
Pointing Device &
Buttons
Indicators7 LED Indicators (Power/Suspend, Battery, HDD, Caps Lock, Scroll Lock, Num Lock, Wireless LAN)
Winkey Keyboard
Built-In TouchPad
Supporting 256/512MB DDR RAM Modules
Expandable up to 1024 MB
Built-in 4-in-1 Card Reader for the following formats:
SD (Secure Digital)
MMC (Multi Media Card)
MS (Memory Stick)
SM (Smart Media Card)
4 Hardware Buttons:
“Q” for screen rotation/power
Ta b
Escape
Scroll Up/Scroll Down/Enter
1.Introduction
System Specifications T200C/T210C 1 - 3
Introduction
FeatureSpecification T200C & T210C
1.Introduction
Interface &
Communication
Power
Management
PowerFull Range AC adapter
Environmental
Spec
Physical
Dimensions &
Weight
OptionalPC Camera (factory option)
Two USB 2.0/1.1 Ports
One Type-II PCMCIA 3.3V/5V Socket
One Stereo Headphone-Out Jack
One Monaural Microphone-In Jack
One RJ-11 (V.90 K56flex™) Jack for Fax/Modem
MDC Modem Module Supporting Wake On Ring
AC Input 100~240V, 50~60Hz
DC Output 20V, 3.25A, 65W
Tem per atu re
Operating: 5
Non-Operating: -20°C ~ 60°C
313 (w) x 265 (d) x 26.5/29.5(h) mm2.3 Kg Without Battery
Smart Lithium-Ion Battery Pack)
Standard - 1800mAH x 6 cells (40W)
Optional - 1800mAH x 8 cells (53W)
Handwriting Recognition Utility
Car Adapter
MDC Module (factory option)
Intel Pro 2100 (802.11b) Mini PCI Wireless LAN Module
°C ~ 35°C
One RJ-45 Jack for 100M (Max) Fast Ethernet
Intel Pro 2100 (802.11b) Mini PCI Wireless LAN Module
One External (VGA) Monitor Port
One DC-in Jack
One Infrared FIR, IrDA 1.1 Transceiver
One Type II PCMCIA 3.3V/5V Socket Supporting
CardBus
Supports Resume From Modem Ring
Supports Resume From LAN
Close Cover Switch
One Primary Smart Lithium-Ion (1800mAH x 6 cells)
Battery Pack with Gas Gauge
Relative Humidity
Operating: 20% ~ 80%
Non-Operating: 10% ~ 90%
External FDD with USB Interface
External Slim Optical Drive with One of the Following
Options:
CD-ROM
DVD-ROM
CD-RW
Combo
DVD-RW
DVD+RW
1 - 4 System Specifications T200C/T210C
System Specifications T200D/T210D
FeatureSpecification T200D & T210D
Processor TypesIntel Pentium® M Processor (478-pin) Micro-FCPGA
(µ0.13) 0.13 Micron Process Technology, 1MB On-Die L2
Cache & 400MHz Front Side Bus - 1.3/ 1.4/ 1.5/ 1.6/ 1.7
GHz
Introduction
Table 1 - 3
T200D/T210D
System
Specifications
MemoryTwo 200 Pin DDR SODIMM Sockets
Supporting DDR 266 MHz Modules
BIOSACPI 4MB Flash ROM Insyde BIOS
LCD Flat Panel TFT - 14.1" XGA LCD
Supporting 1024 * 768 dot resolution
LCD Swivel Hinge (allows conversion between Notebook and Tablet Modes)
DisplayIntel Chipset 855GM Integrated Graphics
Shared Video Memory Architecture Supporting up to 32MB (Default Setting 32MB)
StorageEasy Changeable 2.5" 9.5 mm (h) IDE HDD
Supporting Ultra DMA 66/100
AudioIntegrated Direct Sound Audio Compliant with AC’97 2.2
2 Built-In Speakers
Keyboard,
Pointing Device &
Buttons
Indicators7 LED Indicators (Power/Suspend, Battery, HDD, Caps Lock, Scroll Lock, Num Lock, Wireless LAN)
Winkey Keyboard
Built-In TouchPad
Supporting 256/512MB DDR RAM Modules
Expandable up to 1024 MB
Built-in 4-in-1 Card Reader for the following formats:
SD (Secure Digital)
MMC (Multi Media Card)
MS (Memory Stick)
SM (Smart Media Card)
4 Hardware Buttons:
“Q” for screen rotation/power
Ta b
Escape
Scroll Up/Scroll Down/Enter
1.Introduction
System Specifications T200D/T210D 1 - 5
Introduction
FeatureSpecification T200D & T210D
1.Introduction
Interface &
Communication
Power
Management
PowerFull Range AC adapter
Environmental
Spec
Physical
Dimensions &
Weight
OptionalPC Camera (factory option)
Two USB 2.0/1.1 Ports
One Type-II PCMCIA 3.3V/5V Socket
One Stereo Headphone-Out Jack
One Monaural Microphone-In Jack
One RJ-11 (V.90 K56flex™) Jack for Fax/Modem
MDC Modem Module Supporting Wake On Ring
AC Input 100~240V, 50~60Hz
DC Output 20V, 3.25A, 65W
Tem per atu re
Operating: 5
Non-Operating: -20°C ~ 60°C
313 (w) x 265 (d) x 26.5/29.5(h) mm2.3 Kg Without Battery
Smart Lithium-Ion Battery Pack)
Standard - 1800mAH x 6 cells (40W)
Optional - 1800mAH x 8 cells (53W)
Handwriting Recognition Utility
Car Adapter
MDC Module (factory option)
Intel Pro 2100 (802.11b) Mini PCI Wireless LAN Module
°C ~ 35°C
One RJ-45 Jack for 100M (Max) Fast Ethernet
Intel Pro 2100 (802.11b) Mini PCI Wireless LAN Module
One External (VGA) Monitor Port
One DC-in Jack
One Infrared FIR, IrDA 1.1 Transceiver
One Type II PCMCIA 3.3V/5V Socket Supporting
CardBus
Supports Resume From Modem Ring
Supports Resume From LAN
Close Cover Switch
One Primary Smart Lithium-Ion (1800mAH x 6 cells)
Battery Pack with Gas Gauge
Relative Humidity
Operating: 20% ~ 80%
Non-Operating: 10% ~ 90%
External FDD with USB Interface
External Slim Optical Drive with One of the Following
Options:
LCD Flat Panel TFT - 14.1" XGA LCD with Built-in Touch Panel and Stylus Pen
Supporting 1024 * 768 dot resolution
LCD Swivel Hinge (allows conversion between Notebook and Tablet Modes)
StorageEasy Changeable 2.5" 9.5 mm (h) IDE HDD
Supporting ATA-33/66/100
AudioAC’97 2.1 Compliant
2 Built-In Speakers
Keyboard,
Pointing Device &
Buttons
Indicators7 LED Indicators (Power/Suspend, Battery, HDD, Caps Lock, Scroll Lock, Num Lock, Wireless LAN)
Interface &
Communication
Winkey Keyboard
Built-In TouchPad
Two USB 2.0/1.1 Ports
One Type-II PCMCIA 3.3V/5V Socket
One Stereo Headphone-Out Jack
One Monaural Microphone-In Jack
One RJ-11 (V.90 K56flex™) Jack for Fax/Modem
MDC Modem Module Supporting Wake On Ring
Supporting 256/512MB DDR RAM Modules
Expandable up to 1024 MB
Built-in 4-in-1 Card Reader for the following formats:
SD (Secure Digital)
MMC (Multi Media Card)
MS (Memory Stick)
SM (Smart Media Card)
4 Hardware Buttons:
“Q” for screen rotation/power
Ta b
Escape
Scroll Up/Scroll Down/Enter
One RJ-45 Jack for 100M (Max) Fast Ethernet
One External (VGA) Monitor Port
One DC-in Jack
One Infrared FIR, IrDA 1.1 Transceiver
One Type II PCMCIA 3.3V/5V Socket Supporting
CardBus
Supporting 1024 * 768 dot resolution
LCD Swivel Hinge (allows conversion between Notebook and Tablet Modes)
StorageEasy Changeable 2.5" 9.5 mm (h) IDE HDD
Supporting ATA-33/66/100
AudioAC’97 2.1 Compliant
2 Built-In Speakers
Keyboard,
Pointing Device &
Buttons
Indicators7 LED Indicators (Power/Suspend, Battery, HDD, Caps Lock, Scroll Lock, Num Lock, Wireless LAN)
Interface &
Communication
Winkey Keyboard
Built-In TouchPad
Two USB 2.0/1.1 Ports
One Type-II PCMCIA 3.3V/5V Socket
One Stereo Headphone-Out Jack
One Monaural Microphone-In Jack
One RJ-11 (V.90 K56flex™) Jack for Fax/Modem
MDC Modem Module Supporting Wake On Ring
Supporting 256/512MB DDR RAM Modules
Expandable up to 1024 MB
Built-in 4-in-1 Card Reader for the following formats:
SD (Secure Digital)
MMC (Multi Media Card)
MS (Memory Stick)
SM (Smart Media Card)
4 Hardware Buttons:
“Q” for screen rotation/power
Ta b
Escape
Scroll Up/Scroll Down/Enter
One RJ-45 Jack for 100M (Max) Fast Ethernet
One External (VGA) Monitor Port
One DC-in Jack
One Infrared FIR, IrDA 1.1 Transceiver
One Type II PCMCIA 3.3V/5V Socket Supporting
CardBus
AC Input 100~240V, 50~60Hz
DC Output 20V, 2.5A, 50W
Tem per atu re
Operating: 5
Non-Operating: -20°C ~ 60°C
313 (w) x 265 (d) x 26.5/29.5(h) mm Min2.2 Kg Without Battery Pack
Smart Lithium-Ion Battery Pack)
Standard - 1800mAH x 6 cells
Optional - 1800mAH x 8 cells
Handwriting Recognition Utility
Car Adapter
MDC Module (factory option)
802.11b Wireless LAN Module with USB Interface
°C ~ 35°C
Supports Resume From Modem Ring
Supports Resume From LAN
Close Cover Switch
One Primary Smart Lithium-Ion (1800mAH x 6 cells)
Battery Pack with Gas Gauge
Relative Humidity
Operating: 20% ~ 80%
Non-Operating: 10% ~ 90%
External FDD with USB Interface
External Slim Optical Drive with One of the Following
Options:
CD-ROM
DVD-ROM
CD-RW
Combo
1 - 10 System Specifications T200H/T210H
External Locator - Top View with LCD Open
1
2
T200C/T200VT210C/T210V
T200D/T200HT210D/T210H
3
6
8
5
4
7
8
6
6
3
8
Introduction
Figure 1 - 2
1
2
5
4
7
8
6
Top View with LCD
Panel Open
1.Built-In PC Camera
(Optional)
2.LCD Swivel Screen
3.LED Power
Indicators
4.Cover Sensors
5.LCD Swivel Hinge
6.LCD Side Hinges
7.Power Button
8.Speakers
9.Keyboard
10. TouchPad and
Buttons
11. Built-In Microphone
1.Introduction
11
10
9
11
9
10
External Locator - Top View with LCD Open 1 - 11
Introduction
Figure 1 - 3
Rotating the LCD
Swivel Screen
Rotating the LCD Swivel Screen
1.Introduction
Lid Button
It is recommended
that the lid (left LCDcover sensor) power
button to should be
set to “Do nothing” in
the Power Options
control panel.
This will prevent accidentally triggering a
power saving mode
when you rotate the
LCD swivel screen.
45
3
1
1.Unlock the LCD side hinges & by moving them in the direction of the arrows.
2.Carefully rotate the LCD fully in the direction indicated by the arrow , then lock the side hinges & .
3.Move latches & in and to the left (if they are not already in this position), then push the LCD down to lock it in position.
45
2
12
312
1 - 12 Rotating the LCD Swivel Screen
Introduction
Touch Panel Warning
Users should be very careful not to press too hard with the stylus pen when using it as the input device. Only the approved stylus pen
provided should be used as the input device. Users should avoid sliding the stylus pen (or any object) in the area around the edge of the
screen (between the LCD and the frame) when writing on the screen,
Touch Panel Input
Device
Do not use any sharp
or pointed objects as
anl input device e.g.
the end of a pen or
pencil. Only use the
provided stylus pen
(PDA type) as an input
device.
1.Introduction
Figure 1 - 4
Touch Panel
Warning
Do Not Slide the Stylus Pen (or any object)
Around the Edge of the LCD Screen
Rotating the LCD Swivel Screen 1 - 13
Introduction
1.Introduction
Figure 1 - 5
Front View
1.LCD Latches
2.Microphone-In Jack
3.Headphone-Out
Jack
4.Infrared
Transceiver
5.Scroll/Enter Wheel
6.LED Status
Indicators
7.3 * Hot-Key Buttons
(Esc, Tab, & “Q”
Rotate)
Figure 1 - 6
Rear View
8.External Monitor
(CRT) Port
9.RJ-45 LAN Jack
10. RJ-11 Phone Jack
11. DC-In Jack
12. Vent
External Location - Front & Rear Views
11
4
89
2765
3
1011
12
1 - 14 External Location - Front & Rear Views
Introduction
External Locator - Left & Right Views
1
23
45
Figure 1 - 7
Left View
1.Security Lock Slot
2.Vent
3.Stylus Pen Holder
Figure 1 - 8
Right View
1.Introduction
4.4-in-1 Flash Card
6
Reader
5.2 * USB 2.0 Ports
6.PC Card Slot
External Locator - Left & Right Views 1 - 15
Introduction
1.Introduction
Figure 1 - 9
Bottom View
1.Stylus Pen Holder
2.Battery
3.Intel WLAN
Module Cover
4.Modem &
Wireless LAN
Module Cover
5.Hard Disk Cover
6.RAM Cover
7.CPU Cover
8.Fan Intake
External Locator - Bottom View
6
T20XC/T2X0D Series
5
3
6
T20XV/T2X0H Series
5
4
7
8
1
2
1
7
8
2
Wireless Device
Operation Aboard
Aircraft
The use of any portable electronic transmission devices
aboard aircraft is usually prohibited.
Make sure the module
is OFF if you are using
the computer aboard
aircraft. When the
computer ‘Boots Up’
the module will be
ON.
To toggle power to the
WLAN module use
the key combination
Fn + F11.
1 - 16 External Locator - Bottom View
1
Introduction
T2X0C/T2X0D Mainboard Overview - Top
Key Parts
6
Figure 1 - 10
T2X0C/T2X0D
Mainboard
Overview - Top
Key Parts
1.Intel ICH4 421
BGA
2.CardBus ENE
CB710
3.LAN Controller
RTL8100BL
4.Hitachi H8
5.NS 87393
6.Clock Generator
1.Introduction
1
2
3
5
4
T2X0C/T2X0D Mainboard Overview - Top 1 - 17
Introduction
1.Introduction
Figure 1 - 11
T2X0C/T2X0D
Mainboard
Overview - Bottom
Key Parts
1.CPU Socket (no
CPU installed)
2.Memory Sockets
3.WLAN Module
Socket
4.PCMCIA Socket
5.Intel 855GM(E)
732 Micro
FCBGA
6.Flash RAM BIOS
7.4-in-1 Card
Reader Module
8.CODEC
ALC201A
9.AMP APA2020A
T2X0C/T2X0D Mainboard Overview - Bottom
Key Parts
1
5
2
8
9
3
1 - 18 T2X0C/T2X0D Mainboard Overview - Bottom
6
4
7
Introduction
T2X0C/T2X0D Mainboard Overview - Top
Cable Connectors
4
3
Figure 1 - 12
T2X0C/T2X0D
Mainboard Top
1
5
2
6
7
Cable Connectors
1.Speakers (CN4/
CN5)
2.Keyboard (CN10)
3.Buttons (CN12)
4.Microphone
(CN13)
5.LED Board (CN3)
6.Inverter (CN6)
7.LCD (CN9)
1.Introduction
1
T2X0C/T2X0D Mainboard Overview - Top 1 - 19
Introduction
1.Introduction
Figure 1 - 13
T2X0C/T2X0D
Mainboard Bottom
Cable Connectors
1.Hard Disk
(CN25)
2.CMOS Battery
(CN31)
3.Hot_Key
Board(CN27)
4.CPU Fan (CN18)
5.Battery (CN24)
T2X0C/T2X0D Mainboard Overview - Bottom
Cable Connectors
4
5
3
2
1
1
1 - 20 T2X0C/T2X0D Mainboard Overview - Bottom
Introduction
T2X0V/T2X0H Mainboard Overview - Top
Key Parts
Figure 1 - 14
T2X0V/T2X0H
Mainboard
Overview - Top
Key Parts
1.South Bridge
VT-8235
2.Super I/O
VT1211
3.PCMCIA ENE
CB710/BGA
4.LAN/PHY
VT6103
5.Micro-P H8/2140
6.LVDS VT1631
Transmitter,
Panel I/F
6
1.Introduction
5
1
3
2
4
T2X0V/T2X0H Mainboard Overview - Top 1 - 21
Introduction
1.Introduction
Figure 1 - 15
T2X0V/T2X0H
Mainboard
Overview - Bottom
Key Parts
1.VIA-C3
Processor
(surface
mounted)
2.Memory Sockets
3.PCMCIA Module
Slot
4.North Bridge
VT-8623
5.Flash ROM
BIOS
6.4-in-1 Card
Reader Module
Socket
7.CODEC VT1616
8.Clock Generator
W311
T2X0V/T2X0H Mainboard Overview - Bottom
Key Parts
1
4
2
8
3
7
1 - 22 T2X0V/T2X0H Mainboard Overview - Bottom
6
5
Loading...
+ 92 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.