Prestigio P300MW User Manual
ENG
Please observe all safety precautions when using this product.
Please read this manual carefully before using this product.
• Quick and Easy Installation
• Versatility and Expandability
• That doesn’t make you feel fatigue on your Eyes.
•Flat-Panel Digital Display easy on the Eyes.
2 PRESTIGIO P300MW
Safety Precautions
Power Supply
Warnings
Do not touch the power plug with wet hands.
Doing so may result in electric shock.
Do not use a damaged power cord or plug or a loose outlet.
Doing so may result in fire or electric shock.
Do not plug several devices into the same outlet.
Doing so may cause the outlet to overheat and start a fire.
Insert the power plug fully into the outlet.
A loose or improperly inserted power plug may result in fire.
Cautions
When disconnecting the power cord from an AC outlet, always grasp it by the plug.
Pulling on the cord can damage the internal wire and may
result in fire.
ENG
Do not bend the power cord excessively or place heavy objects on it.
Doing so may result in fire or electric shock.
Be sure to ground the unit.
Failing to do so may lead to electric shock when a short circuit
or overload occurs. If necessary, install a ground fault circuit
breaker. Never ground to a telephone line, lightning rod, or
metal gas pipe. (Doing so may result in fire, electric shock, or
other hazards.)
Always unplug the unit before cleaning.
Not doing so may result in fire or electric shock.
The purpose of these precautions is to ensure user safety and
prevent property damage.
Be sure to read and observe all safety precautions.
3PRESTIGIO P300MW
Installation
Warnings
ENG
Do not place containers with liquids such as flower vases, soft
drink cans, or medicine bottles or small metallic objects on
top of the unit.
If liquid enters the unit or any metal object falls into the unit,
it may result in short-circuit, fire, or electric shock.
Do not place the unit where it is exposed to rain, excessive
moisture or grease.
Doing so may result in fire, electric shock, malfunction, or
deformation.
Do not use or store flamm able or combustible materials
near the unit.
Doing so may result in fire or explosion.
Do not place the unit on an unstable surface, such as a wobbly
stand or sloped table, or on any surface whose area is smaller
than the bottom area of the unit.
If a child climbs on the unit, it could topple and fall onto the
child, resulting in serious injury to the child or damage to the
unit. Place the unit on a flat stable surface.
Do not place a burning candle, burning anti-mosquito incense,
or lighted cigarette on top of the unit. Do not place the unit
near any heat source such as a fireplace or space heater.
Doing so poses a serious risk of fire.
Do not place the unit in a poorly ventilated enclosure, such as
a cabinet.
Doing so poses a serious risk of fire.
Do not run power cords near heat-producing appliances such
as radiators, stoves, or irons .
The excessive heat could melt the insulation and expose live
wires, resulting in fire or electric shock.
Install the antenna away from high-voltage power lines and
communication cables and make sure it is installed securely
.
If the antenna touches a power line, contact with the antenna
could result in fire, electric shock, serious injury, or death.
Cautions
Install the unit at an adequate distance from the wall to
ensure sufficient ventilation.
If the temperature inside the unit rises, it may resultin fire.
Do not cover the unit with a tablecloth, curtain, or other
material.
If the temperature inside the unit rises, it may result in fire.
Be sure to place the unit on a level surface.
The following precautions are divided into “Warnings” and “Cautions”.
Warning : Ignoring this precaution may result in death or serious injury.
Caution : Ignoring this precaution may result in injury or property damage.
4 PRESTIGIO P300MW
Warnings
Form a drip loop where the coaxial antenna cable enters your
building to prevent rainwater from traveling along the cable
and coming in contact with the antenna input terminal.
If rainwater finds its way inside the unit, it may result in fire
or electric shock.
Use and Maintenance
Warnings
Disconnect the power cord from the wall outlet during an
electrical storm.
Not doing so may result in fire or electric shock.
Do not insert any metal objects, such as a screwdriver ,
paper clip, or bent wire into the ventilation openings or A/V
terminals.
Doing so poses a serious risk of fire or electric shock.
Cautions
When not using the unit for long periods of time, discon- nect
the power cord from the wall outlet.
Dust could accumulate over time on the unit and cause it to
generate heat and ignite, or deteriorate insulation, which in
turn may result in an electrical fire.
When moving the unit, be sure to turn off the unit and unplug
the power cord from the wall outlet.
Moving the unit with the power cord connected to the outlet
may cause damage to the cord, resulting in fire or electric
shock.
If you notice any unusual odors or smoke around the unit,
immediately disconnect the unit from the outlet and contact
the service center.
Failure to do so may result in fire or electric shock.
ENG
Do not allow children to climb or hang on the unit.
The unit could topple over onto a child and result in serious
injury or death.
Never disassemble or modify the unit in any way. Do not
attempt to service the unit yourself.
Doing so may result in fire or electric shock. If the unit requires repair, contact the service center.
Warnings
When removing the batteries from the remote control, make
sure children do not swallow them. Keep the batteries out of
the reach of infants and children .
If a child has swallowed a battery, seek medical attention
immediately.
Always use two or more people to lift or move the unit.
If the unit is dropped, it could be damaged or otherwise cause
injury.
Wipe off any moisture, dirt, or dust on the power plug pins
with a clean dry cloth.
Failure to do so may result in fire or electric shock.
It is advisable to clean the interior of the unit at least once a
year. Contact the store of purchase or service center for information .
Continuing to use the unit without cleaning off the dust buildup inside it may result in fire or electric shock.
Always turn off the unit and unplug the power cord when
cleaning the unit. Use a soft dry cloth to clean the unit.
Never clean with industrial strength polish, wax, benzene,
paint thinner, air freshener, lubricant, detergent, or other such
chemicals. Also, do not clean with a damp cloth.
5PRESTIGIO P300MW
What is LCD TV?
LCD (Liquid Crystal Display) is a next generation flat-panel display module. Liquid crystal material is contained between sheets
of glass and electricity causes the liquid crystal material to reflect or block the light emitted from a light source inside the
ENG
display chassis.
By incorporating this LCD display module, LCD TVs enable you to enjoy outstanding picture quality without the worries of space
limitation and harmful radiation you may have experienced with conventional CRT TVs.
Features
• Picture-in-Picture : Enables you to simultaneously display two different image sources.
• PC Compatible Monitor : Enables you to connect PC (D-Sub) input for displaying high-resolution SXGA (1280x1024, 60Hz)
PC images.
• HDTV-Ready Display : Enables you to view high-definition digital pictures using a DVD player or HDTV set-top receiver.
• Various Picture/Sound Controls : Enables you to set the picture and sound settings for a number of different types of
programs and viewing and listening conditions.
• Auto Power On/Off Timer : Enables you to set the TV to automatically turn ON or OFF at a preset time.
• ATM : Enables you to set the TV to search for all available standard broadcast and cable TV channels and store them
automatically.
6 PRESTIGIO P300MW
Names of each part
Front View
ENG
7PRESTIGIO P300MW
Controls and Functions
Back View
ENG
Accessories
The configuration of the components may look different from the following illustration.
Antenna Cable SCART Cable Power Cord User’s Guid e Remote Control Battery (2)
(AAA, 1.5V)
8 PRESTIGIO P300MW
Mounting on a Wall
Your LCD TV can be mounted on a wall as shown in the figure above.
Installation Precautions
Wall Mounting
Please secure enough space for safe use. (Please refer to A and B.)
Installation of the LCD TV in an improperly ventilated location can cause a fire or damage to the LCD TV due to increased
temperature.
Contact your dealer to purchase the “Adjustable-angle wall mount” required for wall-mounted installation.
ENG
Using the Stand
Do not install on an unstable location with support area smaller than the LCD TV.
Please refer to the desktop stand user’s manual for details of installation.
Please contact your dealer to purchase the “speakers”.
9PRESTIGIO P300MW
Installing an Antenna
For an Apartment or Condo Complex
ENG
Using an Indoor Antenna
Locate a wall jack with an F-connector, and then connect the coaxial antenna cable to the wall jack.
For a House
Installing an Antenna
Using an Outdoor Antenna
To install or use an outdoor antenna, if possible, consult a qualified technician for help.
10 PRESTIGIO P300MW
Remote Controller
Functions of remote control buttons
The remote control is using Infra-Red (IR). Point it towards the front of the LCD TV. The remote control may not work correctly
if it is operated out of range or out of angle.
1. MUTE : SOUND MUTE KEY
2. SLEEP : SLEEP TIMER KEY
3. STILL : FREEZE KEY
4. ARC : ASPECT RATIO CONTROL KEY
5. MTS : MULTI-TELEVISION SOUND KEY
6. ERASE : NOT AVAILABLE
7. LAST : PREVIOUS PROGRAM KEY
8. INFO : SCREEN INFORMATION KEY
9. POWER : STANDBY ON/OFF KEY
10. ENTER : SAVE THE VALVE
11. PR /\ : PROGRAM +, MENU CONTROL OR PAGE UP KEY,
STANDBY ON
12. PR \/ : PROGRAM -, MENU CONTROL OR PAGE DOWN KEY
13. VOL + : VOLUME + OR MENU CONTROL KEY
14. VOL - : VOLUME - OR MENU CONTROL KEY
15. INPUT SELECT : MAIN INPUT SOURCE SELECT KEY
16. MENU : OSD MENU DISPLAY KEY
17. PSM : PICTURE STATUS MEMORY KEY (CUSTOM, DYNAMIC, STANDARD, MOVIE, MILD)
18. SSM : SOUND STATUS MEMORY KEY (CUSTOM, STANDARD, MUSIC,
MOVIE, SPEECH)
PIP CONTROL KEY
19. PIP : PIP ON/OFF
20. INPUT : PIP INPUT SELECT KEY
21. POSITION : PIP POSITION CONTROL KEY
22. SWAP : PIP SOURCE SWAP
23. S/SWAP : SOUND SWAP KEY
24. PBP : PIP AND PBP MODE CHANGE
TELETEXT CONTROL KEY
25. ON : TEXT ON KEY
26. MIX : MIX WITH TV SCREEN
27. STORE : STORE THE USER DEFINED FAVORITE PAGE
28. FLOF/LIST : EXCHANGE FLOF/LIST MODE
29. SIZE : TELE TEXT SCREEN SIZE KEY
30. HOLD : HOLD FUNCTION DURING TELETEXT DISPLAY
31. UPDATE : DISPLAY CANCEL OR TEXT UPDATE KEY
32. INDEX : TEXT INDEX KEY
33. TIME: TIME DISPLAY KEY
34. REVEAL : SELECT HIDDEN CONTENT DURING TELETEXT DISPLAY
35. RED, GREEN, YELLOW, BLUE : DIRECT ACCESS TELETEXT LINKED
PAGE KEY
ENG
11PRESTIGIO P300MW
Precautions
Avoiding Remote Control Problems
1. Check the polarity (+,-) of the batteries in the remote controller.
ENG
2. Check that the batteries have power.
3. Check that the LCD TV is powered and that it is properly plugged in.
4. Check if any three-wavelength lamp, special fluorescent or neon sign is turned on near the LCD TV.
Instering Batteries into Remote Controller
1. Press the \/ part and slide the battery compartment cover off.
2. Insert the two supplied batteries (AAA, 1.5V).
Ensure that the polarities (+ and -) of the batteries are aligned correctly.
3. Slide the cover back into place.
CAUTION : Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the national code (Recycling program).
How to watch a cable TV
The remote control should be operated within 30feet(7m) and 30 o to the left and the right of the IR receiver on the front
of the LCD TV.
Used batteries should be disposed properly.
12 PRESTIGIO P300MW
VCR Connections
Connecting to the composite terminal
Connection terminals of other appliances differ by manufacturer and model.
Connect the LCD TV’s Composite In terminal to the VCR’s Composite Out terminal using the Composite cable. (Make sure the
color of the terminals and the color of the cable are the same)
Connecting to the S-Video terminal
* Use the S-Video cable for higher picture quality.
Connecting to the SCART terminal
ENG
* Connect the SCART terminal of the LCD TV and the VCR with the SCART cable.
Playing the VCR
1. Turn on the LCD TV and press on the remote controller.
2. Use to move to “composite”.
If S-Video has been connected, select S-Video.
If SCART terminal has been connected, select SCART1 or SCART2.
3. Turn on the VCR, insert the tape and press play button.
13PRESTIGIO P300MW
Cable TV Connections
Connecting to the composite terminal
In order to watch Cable TV, Subscribe to your local Cable TV company and install a separate converter(Set-Top-Box)
ENG
Connection terminals of other appliances differ by manufacturer and model.
Connect the LCD TV’s Composite In terminal to the cable broadcasting receiver.
Composite Out terminal using the Composite cable. (Make sure the color of the terminals and the color of cable are the same)
Connecting to S-Video terminal
Use the S-Video cable for higher picture quality.
Connecting to the SCART terminal
Connect the SCART terminal of the LCD TV and the cable broadcasting receiver with the SCART cable
Viewing Cable TV
1. Turn on the LCD TV and press on the remote controller.
2. Use to move to “composite”.
If S-Video has been connected, select S-Video.
If SCART terminal has been connected, select SCART1 or SCART2.
3. Turn on the cable broadcasting receive and select the channel you wish to view.
14 PRESTIGIO P300MW
Camcorder/Game Console Connections
Connecting to the composite terminal
Connection terminals of other appliances differ by manufacturer and model.
* Connect the LCD TV’s Composite In terminal to the camcorder/game console’s Composite Out terminal with the Composite
cable. (Make sure the color of the terminals and the color of cable are the same)
Connecting to S-Video terminal
S-Video cable can be used if there is an S-Video terminal.
ENG
Using Camcorder/Game Console
1. Turn on the LCD TV and press on the remote controller.
2. Use to move to “composite”.
If S-Video has been connected, select S-Video.
3. Turn on the Camcorder or video game and Set to Video mode. (Please refer to the User’s manual of Camcorder/ Video game
for more information)
4. Insert tape into Camcorder and press play button or insert disc into the Video game console.
15PRESTIGIO P300MW
DVD Connections
Connecting to the component terminal
Connection terminals of other appliances differ by manufacturer and model.
ENG
1. Connect LCD TV’s Y, PB, PR terminal in component 1 to DVD’s Video Out terminal using the external cable.
2. Connect LCD TV’s Audio terminals (left & right) in component 1 to DVD’s Audio Out terminal using the Audio cable.
Connecting to the S-Video terminal
S-Video cable can be used if there is an S-Video terminal.
Connecting to the SCART
Connect the SCART terminal of the LCD TV and the DVD with the SCART cable.
Playing the DVD
1. Turn on the LCD TV and press on the remote controller.
2. Use to move to “component1”.
If S-Video has been connected, select S-Video
If SCART terminal has been connected, select SCART1 or SCART2.
3. Turn on the DVD, insert the DVD and press Play button.
16 PRESTIGIO P300MW
Loading...