Page 1
Important Safety
Instructions
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric to persons.
CAUTION
1. To reduce the risk of electric shock, do not remove the cover (or back). No
user-serviceable parts inside. Refer servicing to qualified service personnel.
2. The manufacturer should not hold responsibility for the damage caused by any
substitutions and modifications of the product without authorization from the
manufacturer or authorized unit
WARNING
The device should not be exposed to dripping or splashing and no objects filled with
liquids should be placed on the device.
.
Accessories
Prestigio GeoVision 5850HDDVR–Accessories List
ITEM NAME QTY
Car Charger 1
USB Cable 1
Car Mount 1
User Manual 1
Warranty Card 1
Driver/Document CD 1
EN – 1
EN
Page 2
EN
Prestigio GeoVision 5850HDDVR
Front and Side View
2
3
1. LCD Touch Screen
Tap the screen with touch pen or finger to select menu commands or to enter
information.
2. Battery Status Indicator
The indicator glows in bright green color when battery is fully charged and in red
color when charging.
3. Microphone
Records sound
4. Earphone Jack
Connect to earphone or headset.
5. microSD Slot
Insert micro SD memory card for data access or memory expansion.
6. mini USB Port
Connect to USB Cable for data access or battery charging
View of Main Unit
1
EN – 2
Prestigio GeoVision 5850HDDVR
Rear and Top View
1
4
5
6
1. Speaker
Emit sound, voice or music.
2. Camera lens
Take photos or record videos when you’re driving
3. Reset Button
Press to reboot the device.
4. Power Button
Press to power the device ON/OFF.
5. Lock Button
Press to lock the current video
2
3
4
5
View of Main Unit
Page 3
Device Connections
Inserting microSD Card
NOTE:
Please always make sure that no application is accessing to the micro
SD card before extraction.
Connecting to External USB Device (Charging)
To insert a microSD card, place the
connector towards the device and the
card label towards the front side of
the device.
To remove a microSD card, gently
press the edge of the card to release
the safety lock and pull the card out
of the slot.
Insert the USB connector into the
appropriate USB port.
Insert the other USB connector into
the USB port on PC to start charging.
Connecting to Car Charger
Device Connections
Insert the USB connector into the
appropriate USB port.
Insert car charger connector into
vehicle 12V accessory/cigarette
socket to start charging.
NOTE:
Please connect the car charger to vehicle 12V accessory/cigarette
socket after the vehicle engine is started to protect the device from
sudden current impulse.
EN – 3
EN
Page 4
Cautions on Battery
EN
About Rechargeable Battery
The device is equipped with a built-in rechargeable battery. Please fully charge the
battery (for at least 5 hours) before initial use. The battery status indicator glows in red
color when charging and turns bright green color when charging is complete. Charging
time is approximately 4 hours.
Working conditions and precautions for the rechargeable battery
Devices with new batteries should be fully charged before initial use.
It is not necessary to start charging the device before the battery is fully
discharged.
Charging
EN – 4
Getting Started
1. Press and hold Power Button to turn
on the device.
2. Shortly after the greeting screen is
shown, the main menu will be
displayed.
3. Tap the corresponding buttons with
touch pen included to navigate
through various functions.
4. Press and hold Power Button to turn
the device off or to allow the device to
enter sleep mode.
5. Tap Sleep icon to put the device to
sleep mode or Power Off icon to turn
the device off.
Page 5
Wireless & Networks
Sound
Display
Storage
Apps
Accounts& Sync
Location service
Security settings
Language & Keyboard
Backup &reset
Date & Time setting
Accessibility
Developer options
About device
Device Settings
In the main menu, tap on
to enter the device settings.
You can scroll on the screen
upwards / downwards to
display other settings.
Configure the wireless connections, eg: Wi-Fi
Adjust sound volum e, mute device, or enable warnin g messages.
Set the screen brightness, auto-rotate, animation & screen
timeout
Check the available storage card & device memory.
Manage downloaded and running applications
Log in / out from the social network accounts, such as Google
Account, Exchange ActiveSync account.
Enable applications using data from sources such as Wi-Fi and
mobile networks to orientate your location and improve Google
search results via check the options.
Set the screen lock mode and owner information, encrypt your
device, manage password and administrate your device.
Set the operating system language & onscreen keyboard options
Enable or disable the automatic bac kup feature and reset the device.
Set up Time Zone/Date/Time.
Enable your installed services and adjust related settings.
Set options for application develop ment.
View the device system info, such as network type & name,
battery power level, Model number, legal information & software
version of the device.
DVR Function
1. Tap on DVR icon on the main menu
to start using DVR function.
2. Tap on to start or to sto p
video recording; Tap on to
play the recorded video; Tap on lock
key to lock the recording video.
3. Tap on to format the TF card &
start-up method of video; Tap on
to exit the DVR function.
4. To protect the current video file, you
can tap the icon to save it
under the directory Save File in
case of overwriting of the video file
when the memory capacity is in lack.
5. To check and view the video
recorded, tap the icon to enter
the Video Record interface as left
figure.
6. When playback, tap to
stop/resume playing the video, tap
/ to select playing the
previous/next video under this
directory, or drag the icon
leftward/rightward to view the video
clip you want. Tap the icon to
check the longitude and latitude
when this video recorded. Tap
to save this video under the Save
File directory.
EN – 5
EN
Page 6
EN
(
Note: Please insert TF card properly into the device before running the car DVR
Operation)
Device Settings
7. To set the parameters of car DVR
function, tap the icon to enter the
setting options interface as follows:
Picture- in-Picture function: tap to prompt
the dialog box, select open, the car
DVR window will appears on other
interface when recording, double tap
on the window to enter the recording
interface.
Whether boot start: select YES, and then
the car DVR will automatically run
background after booting the device.
Gravity sensor sensitivity: there are
high/middle/low for options to protect
current video being overwritten when
crush occurs
Whether record sound: if select YES,
then the sound will be recorded when
recording the video; if select NO, it will
record only the image.
File selection time: tap to select the tim e
interval for saving the file.
EN – 6
Connecting to Wi-Fi
1. Select Settings icon to access the list of
options. Select Wireless & networks.
2. To turn on/off Wi-Fi, simply slide your
finger rightward/leftward on the control bar.
3. The device will scan for available Wi-Fi
networks and display them at the bottom of
the screen.
4. Tap on the network you want to connect
to. Then tap inside the Wireless password
field to make the virtual keyboard appear.
Enter thX` Connect.
5. Your device will now attempt to establish a
connection to the Wi-Fi access point with the
network parameters you entered. After
connecting to a Wi-Fi network, the icon
FM Function
（Note: Please make sure GPS is connected to the car charger before using FM
Transmitter）
appears on the status bar on the right side of
the Home screen.
1. Tap icon on home menu.
2. Tap on / or drag the cursor
to tune FM frequency down/up.
3. Tap on to enable the FM
function.
4. Tap on to exit.
Page 7
Initialization and
Software Activation
Initialization and
Software Activation
EN
When using the navigation software for the first time, an initial setup process starts
automatically. Do as follows:
Select the program language. If your preferred language does not appear on the
screen, tap
/ or drag the list up or down with your finger to view all available
languages. Tap
confirm your selection, and proceed to the next page.
Read the Software and Database End User Licence Agreement, and tap
if you agree with the terms of use.
The Configuration wizard starts in the selected language. Tap to
continue.
Select the voice guidance language profile. If your preferred language does not
appear on the screen, scroll the list for other available profiles. Tap any item in the list for
a short voice sample. Tap
page.
to select your preferred language. Tap to
to confirm your selection, and proceed to the next
Set your preferred time format and units. Tap to confirm your
preferences.
Set your preferred route planning options. Tap to confirm your
preferences.
You are offered to watch the tutorial that leads you through the basic steps of
navigation. Tap
functions of your software. You can run it later if you choose
You are now asked whether you allow the software to collect usage information and
GPS logs that may be used for improving the application and the quality and coverage of
maps. Tap
function.
The initial setup is now complete. The application starts.
if you would like to get an instant understanding of the
to allow the anonymous statistics or to disable this
.
EN – 7
Page 8
EN
Introduction
Navigation
Navigation
Destination Menu
After the initial setup, and whenever the software is started, the Navigation menu
appears. You have the following options:
Tap to select your destination by entering an address or selecting
a place of interest, a location on the map or one of your Favourite destinations.
You can also look up your recent destinations from the Smart History, enter a
coordinate or use the location saved in a photo.
Tap to display the route parameters. You can view the route in its
full length on the map. You can also perform route-related actions such as
editing or cancelling your route, setting a start point for the route, picking route
alternatives, avoiding parts of the route, simulating navigation or adding the
destination to your Favourites.
Tap to customize the way the navigation software works, watch the
Tutorial, simulate demo routes, or to run some additional applications.
Tap to start navigating on the map.
Tap to stop navigation and exit the software.
EN – 8
In the Navigation menu, tap
options:
. The Find menu provides you with the following
Tap to specify an address as your destination.
Tap to select a place of interest as your destination.
Tap to navigate to a location selected on the map.
Tap to choose from the list of your favourite destinations.
Tap or to navigate to the recent destination that is shown on the
button.
Tap to choose from the list of all recent destinations.
Tap to navigate to a coordinate or to a location saved in a photo.
Page 9
Navigating to An Address
Navigation
Navigation
Navigating to An Address
EN
In the Navigation menu, tap
proposes the city or town where you are located.
If needed, change the country. Tap the button showing the name of the country.
1. Use the keyboard to enter the name of the country.
2. After entering a couple of characters, the list of countries that match the entered
string appears. Tap the country of your choice.
If needed, change the city/town. Tap the button showing the name of the city/town,
and use the keyboard to enter a part of its name. As you enter letters, the most likely
city/town name is always shown in the input field. You have the following options:
, then tap . By default, the screen
Tap to select the city/town that is offered in the input field.
Tap to correct your entry.
Tap to browse the list of city/town names matching your input.
Select a city/town from the list.
Enter the street name:
1. Tap .
2. Use the keyboard to enter a part of the street name.
3. Tap to select the street that is offered in the input field or tap
to browse the list of all streets matching your input. Select a street from the list.
Enter the house number:
1. Tap .
2. Use the keyboard to enter the house number.
3. Tap to finish entering the address.
The map appears with the selected destination in the middle. Tap another map
location if necessary, then tap
After a short summary of the route parameters, the map appears showing the entire
route. Wait for a few seconds or tap
to confirm the destination.
and start navigating.
EN – 9
Page 10
EN
Navigation
Navigating to a Place of Interest (POI)
On the Map screen, tap
menu, tap
categories:
to return to the Navigation menu. In the Navigation
, then tap . You are offered the following preset search
Tap to get a list of petrol stations along the route or if it is
not available, around your current position or your last known position.
Tap to get a list of parking lots near the destination or if it
is not available, around your current position or your last known position.
Tap to get a list of restaurants along the route, around
your current position or your last known position.
Tap to get a list of accommodation near the destination,
around your current position or your last known position.
You can also tap
and search for a place by entering its name.
EN – 10
Navigation
Navigating to a Place of Interest (POI)
If none of the above is appropriate, tap to find a place of interest at the following
locations:
Tap to search around the current position or if it is not available,
around the last know position.
Tap to search for a place within a selected city or town.
Tap to search for a place around the destination of the active
route.
Tap to search along the active route, and not around a given point.
This is useful when you search for a later stopover that results in a minimal
detour only, such as searching for upcoming petrol stations or restaurants.
Page 11
Example for Navigating to a Place of Interest
Navigation
More Menu
EN
Example: To find a park around your destination, do as follows (starting from the
Navigation menu):
Tap .
Tap .
Tap .
Tap .
The list of place categories appears. Tap or slide your finger to browse the list,
and tap
Tap to browse the whole category, or tap to narrow
down your search.
Tap any of the list items.
Check the details and the location of the place, and then tap .
After a short summary of the route parameters, the map appears showing the entire
route. Wait for a few seconds or tap
.
and start navigating.
The Map screen is the most important and frequently used screen of the software. The
Vehimarker (a blue arrow by default) represents your current position, and the orange
line shows the recommended route. There are screen buttons and data fields on the
screen to help you navigate. During navigation, the screen shows route information.
At the top of the screen, you see your heading and the house numbers on left and
right if you have not selected a route destination. When navigating a route, you see
the next manoeuvre and the next street/road on your route. Tap either of them to
open the route itinerary.
Tap to open the Quick menu with a selection of functions that are useful
during navigation.
Tap the map anywhere to explore the map around your current position. Additional
map control buttons appear.
Tap to open three data fields on the map. Tap any of them to
suppress the others. The default values (you can change them in Map settings):
the remaining distance to the destination,
the estimated time of the arrival at the destination, and
the remaining time of the trip.
Tap to return to the Navigation menu.
EN -11
Page 12
EN
More Screen
Settings
The 'More' menu provides you with various options and additional applications. In the
Navigation menu, tap
.
: Fine-tune route planning options, change the look of the Map screen,
turn on or off warnings, or restart the Configuration wizard, etc.
: Visit www.naviextras.com to get additional content, such as new maps or
3D landmarks and useful applications.
: Access multimedia applications: the Picture Viewer or the Music Player.
: Access travel applications: the unit converter, the clothing size converter
or country information.
: Access other useful applications: the calculator, the fuel and maintenance
monitor, sunrise and sunset information or the trip and track log monitor.
: Read the Tutorial to get instant understanding of the functions of your
software, or run the Demo to watch sample route simulations to see how
navigation works.
EN -12
In the Navigation menu, tap
you with the following options (scroll the list to see all):
, then tap . T he Settings menu provides
: Adjust the different sound volumes, change the voice guidance
profile, or enable and set up warnings.
: Change the function buttons in the Quick menu of the Map screen.
: Before selecting one of the Lorry profiles as the Vehicle type used
in route calculation, set up the editable lorry attribute profile with the parameters
of your lorry. These parameters will be used in route calculation.
: You can turn Smart Routes on or off, select whether to take traffic
events into consideration when calculating the route or you can change the
radio station.
: Select the type of vehicle you are driving, the road types used in
route planning, and the route planning method.
: These settings determine how Green routes will be calculated.
Page 13
Settings
They are also used to display the cost and CO
: Adjust map related settings: change the daytime and night colour
schemes, change the default zoom level, switch between 2D and 3D map,
suppress buildings or change the Vehimarker.
: Change the values of the data fields on the Map screen, show or
suppress junction views and signpost or display a route progress bar on the left
of the map.
: Turn the menu animations on or off, select a different skin for the
application, adjust the display backlight.
: Change the program language, the time format and units or the
time zone.
: Turn the automatic trip or track log saving on or off, check the
current size of the trip database.
: The application collects usage information and GPS logs that may
be used for improving the application and the quality and coverage of maps.
Here you can enable or disable collecting these logs.
: Modify the basic software parameters set during the initial setup
process.
: Delete all saved data and reset all settings to their factory defaults.
emission of routes.
2
Troubleshooting
Take steps described in the tables below to solve simple problems before contacting
customer service.
NOTE:
Immediately turn off the device and disconnect the power adapter if the
device is not working properly. Never try to repair the unit without
authorized professionals for it may damage the unit.
PROBLEM
Users cannot
turn on the unit.
There is no
sound.
There is no
picture.
Irregularity or
instability in
signal receiving.
POSSIBLE CAUSE
The adaptor is not
connected well.
The built-in rechargeable
battery is weak.
The volume may be turned
down or mute.
The brightness may be
turned down.
The built-in rechargeable
battery is weak.
The unit may be obstructed
by material, such as heat
insulation paper.
POSSIBLE SOLUTION
Connect the adaptor
correctly.
Use the adaptor to supply
power or charge the
battery.
Turn up the volume or turn
on the sound output.
Adjust the brightness of the
LCD.
Use the adaptor to supply
power or charge the
battery.
Remove the material.
EN – 13
EN
Page 14
Technical Specifications
EN
MODEL
Navigation Software IGO Primo
GPS Chipset BCM4751
DVR 120 degrees/720P/1.0 MP/IR Light /30FPS
Antenna Internal
Interface USB
Display size 5"
Resolution 800*480
Display type TFT, Tou ch sc ree n
RAM 512 MB,DDR3
Flash 8GB, MLC
Expansion slot Micro SD-Card slot, max 32GB
Battery type/capacity Li-poly/1000mAh
Operating system Android 4.0
Speaker Built-in, 1.5W
Video formats supported
Audio formats supported WMA, MP3,WAV,M4A,OGG, AAC
Earphone jack 3.5mm
Operating Temperature -10 ºC ~ +50ºC
Operating humidity 10% to 90% non-condensing
Disclaimer
As the Prestigio products are constantly updated and improved, your
device’s software and hardware may have a slightly different
appearance or modified functionality than presented in this Quick Start
Guide.
Prestigio hereby states that this GPS Navigator complies to basic requirements and
another relevant regulations given by the EU directive1999/5/ES. Full version of the
declaration of conformity is available on http://www.prestigio.com/compliance
GV5850HDDVR
MPEG4,WMV, AVI, ASF,MP4,
MPG,3GP （not support RM,RMB)
EN – 14
.
Loading...