Prestige Glow P18i User Manual
Glow P18i LED Par
USER MANUAL
18*8W,RGBW 4-IN-1 QUAD-
COLOR
2"
Glow P18i LED Par – User manual
TABLE OF CONTENTS
1. Summary 3!
Product Introduction 3"
Content List 3"
2. Safety Information 3!
Safety notes 3"
Safety instructions 4"
3. Product diagram 4!
4. Features 5!
5. DMX Control 5!
DMX Channel（3CH） 5"
DMX Channel（4CH） 6"
DMX Channel（5CH） 6"
DMX Channel（8CH） 7"
6. Display Operation 8!
7. Menu Instructions 8!
Operating instructions 10"
8. Operating Control Instructions 11!
Master/Slave 11"
9. XLR cable connecting 12!
XRL cable 12"
10. Wiring diagram 13!
11. Trouble Shooting 14!
12. Technical Specifications 15!
3"
Glow P18i LED Par – User manual
1. SUMMARY
Thank you for purchasing our Glow P18i LED Par. Please read these instructions
carefully before operating the system to avoid any possible damage or misuse.
PRODUCT INTRODUCTION
The Glow P18i LED Par light is encased in an aluminum shell, and displays a long
can, short can and colour filter. It’s high power 4-in-1 LEDs (made up of R, G, B, W
LEDs) have a long life expectancy, low power consumption, good colour mixing
effect ability and high brightness, and can each be independently dimmed and
controlled. The light also includes built in programs such as dimming, strobe, gradual
change and fading. An international standard DMX 512 signal is recommended for
best results.
CONTENT LIST
o GLOW P18I LED PAR light (x1)
o DMX signal cable (x1) (sold separately)
o The User Manual (x1)
2. SAFETY INFORMATION
SAFETY NOTES
Seek advice from a professional prior to authoring any repairs
Always ensure the system is disconnected from the power source before assembling,
deconstructing and moving
Avoid direct eye exposure when in use
4"
Glow P18i LED Par – User manual
SAFETY INSTR UCTIONS
Ensure the power supply voltage corresponds with the required voltage for the lights,
and is within the range of the requested technical restrictions.
Before installing, check the lights’ fasteners and mechanical structures are in good
condition and there is no apparent damage.
This light is designed for indoor and outdoor use, however the working
temperature must be kept below 50 degrees.
The fixtures can be mounted in any position, provided there is adequate room for
ventilation. Make sure there are no inflammable and explosive items within 0.5 meters
of the fixture.
The yellow/green cables are for earthling safety. These should not flicker when fixture
is in use.
3. PRODUCT DIAGRAM
5"
Glow P18i LED Par – User manual
4. FEATURES
o High quality LED: low power consumption, good brightness, stable
capability and long life span
o Each coloured LED equipped with 256 dimming. The RGB can make
over 16.7 million different colour combinations.
o Dim: 0%-100% (Strobe, gradual change, jumping change etc.)
o DMX512 Controller, 4 button set DMX ID address with led display
o Auto run /sound activated/master slave/interconnected multi-machine
control
o Uses a switching power supply to protect the LED
o Lens degree:
25º or 45º options
o 3, 4, 5, 8CH DMX control channel options
o
Body color: black or white
5. DMX CONTROL
DMX CHANNEL（ 3CH）
Channel
DMX Value
Control Function
Remarks
1CH
0-255
RGB color mixing
Hue
2CH
0-255
W Dimming
0-100%
Color Saturation
3CH
0-255
General dimming
0-100%
Purity
Note: Chromaticity is the visible light, such as red, green, yellow, cyan etc.
Color saturation refers to the proportion of color chromaticity possession (100%
saturation means the color has reached its purest state).
Purity value refers to the brightness, when purity reaches 100% and the color is the
brightest.
Loading...