Page 1
11
1
2
3
4
5
7
8
9
Part Number
M-S030021
M-O017937
M-S016012
M-S007026
W-O001757
M-S0310536
M-S004039
M-S004093
W-A017511
M-O01765410
M-S038006
Description
RUBBER FOOT
715X RULER
1 1/8 HOLE PLUG
1/2-13 HEX LOCK NUT
TORQUE WASHER
LARGE TRIMMER SPRING
10 X 1.5 PHPHPBS
#8 X 2 LO-ROOT SCREW
PREM. LRG. BLOCK
BLOCK WEAR PAD
5/16-18 X 1 3/4 SL. OVAL
715 STACKCUT TRIMMER
Qty.
4
1
1
1
1
1
3
3
1
1
1
PARTS LIST
Part Number
W-O072167
12
W-A072160
14
M-S001020
15
M-S007021
16
W-A715A00
17
18
M-S007033
19
M-S043016 1
M-O017642
20
21
W-O017652
22
M-S001149
CLAMP POST BEARING
15" STRAIGHT BLADE
ASY 15" CLAMP BAR
10-32 X 1/2 PHIL UC FH
5/16-18 JAM HEX NUT
15" STACKCUT HANDLE ASSY
HEX ACORN NUT, 10-32
1" HAND GRIP, BLACK
LATCH SPACER
LARGE SAFETY LATCH
10-32 X 1.13 P/PH B/O
Description
StakCut Paper Trimmers
Qty.
Part Number
W-O721515
23
1
1W-O01051513
24
M-S004061
1
25
M-S007054
4
26
W-O072168
1
27
M-S004065
1
28
M-S001058
1
1
1
1
Description
15" CURVED STACKCUT BLADE
#8 X 1.25 TRIM HD.
6-32 HEX KEPS NUT
CLAMP POST FRONT
#8 X 5/8 PH PAN HD
6-32 X 1 PHIL PAN HEAD
Qty.
1
4
2
1
2
2
1
2
3
4
5
7
8
9
11
Part Number
M-S030002
M-O017957
M-S016012
M-S007026
W-O001757
M-S0310536
M-S004039
M-S004093
W-A017511
M-O01765410
M-S038006
Description
RUBBER FOOT W/RECESS
724 RULER, .50 X 17.56
1 1/8 HOLE PLUG
1/2-13 HEX LOCK NUT
TORQUE WASHER
LARGE TRIMMER SPRING
10 X 1.5 PHPHPBS
#8 X 2 LO-ROOT SCREW
PREM. LRG. BLOCK
BLOCK WEAR PAD
5/16-18 X 1 3/4 SL. OVAL
i
Key Features and Benefits
8
Qty.
12
4
W-O072167
1
1
14
W-A072162
1
M-S001020
15
1
M-S007021
16
1
W-A724A00
17
7
18
M-S007033 HEX ACORN NUT, 10-32 1
3
19
M-S043016 1
1
M-O017642
20
1
21
1
M-S001149
22
DescriptionPart Number Qty.
CLAMP POST BEARING
ASY 24" CLAMP BAR
10-32 X 1/2 PHIL UC FH
5/16-18 JAM HEX NUT
24" STACKCUT HANDLE ASSY
1" HAND GRIP, BLACK
LATCH SPACER
LARGE SAFETY LATCHW-O017652
10-32 X 1.13 P/PH B/O
1
W-O722415
23
1W-O01052413 24" STRAIGHT BLADE
24
M-S018002 1/8D X 3/4 ROLLPIN 2
1
25 M-S004061 #8 X 1.25 TRIM HD. 5
7
26
M-S007054
1
27
W-O072168
1
28
M-S004065
29
M-S001058
1
1
1
DescriptionPart Number Qty.
24" CURVED STACKCUT BLADE
6-32 HEX KEPS NUT
CLAMP POST FRONT
#8 X 5/8 PH PAN HD
6-32 X 1 PHIL PAN HEAD
1
2
1
2
2
• Clamp securely holds stacks for accurate cutting without
tearing or shifting
• Heavy-duty 3/4” thick wood base
• Fully-hardened self-sharpening steel blades cut up
to 30 sheets
• Accurately cuts paper, matte board, cardboard, film,
tissue, and textiles
• Permanent 1/2” grid and dual rulers for proper paper alignment
• Patented automatic blade latch locks with every cutting motion
• Torsion spring counterbalances blade arm
• Non-skid feet
Model Numbers
715 – 15” cutting length
724 – 24” cutting length MADE IN USA
Page 2
A
E
C
D
B
Key Components
A – Hand Grip/Blade Arm/Blade Latch Assembly
B – Wood Base
C – Alignment Ruler
D – Hold-Down Clamp
E – Paper Guide Ruler
Assembly Instructions
None – your trimmer is ready for use right out of the box
Automatic Safety Latch
The patented automatic blade latch is a key safety feature of this
trimmer. It will lock with every complete cutting stroke, helping to
eliminate forgetfulness. Remember to always push the blade arm
down completely when you are finished cutting, to ensure that the
latch activates. Never remove the latch for any reason.
Operating Instructions
1. Place the trimmer on a flat, stable surface
2. Release the blade latch, which is located on the hand grip (A)
3. Lift the blade arm (A) up into cutting position
4. Slide the paper under the clamp (D), pushing the paper up
against the paper guide ruler (E), and use the rulers or the 1/2”
grid, to align the paper to the proper position.
CAUTION:
Keep hands and fingers behind the clamp (D)
at all times, away from the cutting blades
5. While holding the silver clamp handle (D) down with your left
hand, pull down the blade arm (A) to cut.
6. Always make sure that the blade arm is completely down and
locked when not in use.
Safety Information
• Always ensure that the blade arm is fully pushed down, and that
the blade latch is engaged, when not in use
• Never operate the trimmer without the clamp in place
• Always keep clothing, jewelry, watches, and hair away from
the cutting blade
• Keep out of the reach of children
• Do not carry the trimmer by the hand grip or the blade arm
For Best Cutting Performance
Use Trim-Ease Blade Lubricant for a smoother cut and to help
preserve the life of the cutting blade. To order, please contact customer service at the number below and ask for Trim-Ease Blade
Lubricant, part number MRS037046.
Customer Service
Telephone: (260) 563-0641
Fax: (260) 563-4575
Email: info@martinyale.com
Internet: www.martinyale.com
Address: Martin Yale Industries, Inc.
251 Wedcor Avenue
Wabash, IN 46992
AUTOMATIC BLADE
SAFETY LATCH
Visit www.martinyale.com for information on office products,
including folding machines, punches, and catalog racks.
Literature Part No. M-S027087
Rev.8 5/30/19
Loading...