Precision Power S.12, S.15 User Manual
A
M
P
A
M
P
1 Sedona Woofer Wired to 8Ω
A
M
P
2 Sedona Woofers Wired to 4Ω
A
M
P
1 Sedona Woofer Wired to 2Ω
2010 Sedona Series
Subwoofers
S. 1 2 S.15
A
M
P
2 Sedona Woofers Wired to 1Ω
3 Sedona Woofers Wired to 2.66Ω
WWW.PRECISIONPOWER.COM
WWW.PRECISIONPOWER.COM
Thank you for choosing PrecisionPower
woofers. Designed and
engineered in the USA, this product combines innovative technology with the finest materials to consistently deliver
of the Art
PrecisionPower
™ performance, sound quality, reliability, and value. This
product reflects our commitment to offer you
Absolutely State
unparalleled performance and quality for years of dependable service and listening enjoyment.
Enclosure Dimensions
Included in this manual are a number of different enclosure suggestions. These are by no means the only enclosures to use, but they
provide a starting point to determine the correct enclosure for your
needs many factors must be addressed (amount of power, vehicle,
placement, crossovers, etc) Therefore, as always PrecisionPower
recommends that your subwoofer be installed by an authorized
PrecisionPower dealer.
Features, Parameters, & Dimensions
Injection Molded Polypropylene/Mica
Cone & Dust Cap
ABS Gasket
2” 4-layer VC on Kapton Former
series wired S.12 S.15
Fs (Hz)
Qms
Vas (ft³)
Cms (mm/N)
Mms (g)
Rms (kg/s)
Xmax (mm)
Xmech (mm)
Piston Diameter (in)
Sd (in²)
Qes
Re (Ω)
Z (Ω)
BL (Tm)
Rms Power (watts)
Qts
NO (%)
1w/1m SPL (dB)
2.8V SPL (dB)
Voice Coil Diameter (in)
Impedance (Ω)
M-vd (ft.
3
)
Quick Disconnect Terminals
CONEX Composite Spiders
Stamped Steel Frame
Vented T-Yoke Back-plate
22.89 19.52
3.57 4.279
3.34 5.076
0.266 0.146
181.5 456.7
7.311 13.09
8.1 8.1
12.15 12.15
11.26 12.83
77.5 129.2
0.755 0.933
7.2 7.2
8 8
15.78 20.79
250 300
0.623 0.766
0.145 0.111
83.64 82.47
84.22 83.06
2” 2”
DVC 4Ω DVC 4Ω
0.0956 0.174
Enclosure Construction
All enclosures should be made of .75” (3/4”) material only. When
possible, make the baffle 1.5” (1 ½) thick and add .75” (3/4”) to the
depth of the enclosure to compensate. All volumes INCLUDE vent/
port and subwoofer displacements. DO NOT change the volume
unless you plan on adding a substantial amount of bracing. For
added performance, applying a coat of fiberglass resin to the interior
walls will greatly improve sealing the enclosure. Adding a thin layer
of poly-fill will improve response by smoothing out reflections
within the enclosure.
Enclosure Recommendations
S.12 Sealed S.12 Ported
Dimensions
Vol.
3
(H x L x D)
(ft.
)
1.00 13x14.75x13 1.221 35.5 2.00 4” x 12” 35 30.1
1.50 13x21.25x13 1.056 31.2 2.50 4” x 12” 28.1 25.8
2.00 13x27.75x13 0.962 30.2 3.00 4” x 12” 25.9 23.9
QTC
-3dB
(Hz)
S.15 Sealed S.15 Ported
Vol.
Dimensions
3
(ft.
)
(H x L x D)
2.00 18x17.5x15 1.361 27.1 3.00 4” x 12” 28.8 25.2
3.00 18x25x15 1.178 24.2 4.00 4” x 12” 24.7 21.5
4.00 18x33x15 1.076 22.7 5.00 4” x 12” 22 19
QTC
-3dB
(Hz)
Vol.
(ft.3)
Vol.
(ft.3)
Dimensions
(H x L x D)
14x23.75x14
14x29.25x14
14x34.75x14
Dimensions
(H x L x D)
17x23.25x17
17x30.5x17
17x37.5x17
Port
(dia. X L)
Port
(dia. X L)
Freq.
(Hz)
Freq.
(Hz)
-3dB
(Hz)
-3dB
(Hz)
WWW.PRECISIONPOWER.COM
WWW.PRECISIONPOWER.COM
Loading...