Precision Power QBASS REMOTE Owners Manual

QBASS REMOTE

TM

INSTALLATION

Using the supplied bracket, firmly mount the

QBASS REMOTE

TM

boost control encoder within easy reach of the driver’s seat. Insert
one end of the 25 foot data cable into the back of the encoder and
route the cable to the amplifier to be controlled. A single

QBASS

REMOTE

TM

encoder can control multiple DCX amplifiers through the

RCA output option on the amplifier.

OPERATION

After you have mounted the remote boost control, it’s time to select
from one of four boost frequency centers - 30Hz, 36Hz, 44Hz, or
60Hz. Find the switches on the front endplate of your amplifier that
are labeled

QBASS

TM

1 and 2 and set them according to your

frequency choice using the chart below.

CAUTION: The

QBASS PLUS

TM

system should only be used in
systems with strong subwoofers. 18dB is a lot of bass boost and
could damage full range speakers.

See your DCX amplifier owner’s manual for more information about warranty of

Precision Power

products.

Precision Power

is a division of Directed Electronics,

Inc., One Viper Way, Vista, CA 92081. 1-800-62-POWER

QBASS

TM

Settings

1 2 Freq.
IN IN 30Hz
IN OUT 36Hz

OUT IN 44Hz
OUT OUT 60Hz

© 2004 Directed Electronics, Inc.Vista, CA G41825 01/04