Precision Power PPI35.1, PPI40.1, PPI46.1, PPI52.1, PPI57.1 Owners Manual

Thank you for choosing

PPI

audio epuipment. Now, HANG ON!

PPI

products are engineered and manufactured to deliver a wild ride of
performance, sound quality , and reliability. This

PPI

product reflects our com­mitment to offer you versatility and quality for years of incredible power and
listening enjoyment!

SERVICE

Do not attempt to service

PPI

products yourself. Performing exploratory
surgery on your audio equipment yourself will void the warranty. All parts of
your

PPI

gear have been built to our specifications. These parts are not made

available to any unauthorized

PPI

dealer nor are they for sale. Our goal is to

make sure that your

PPI

product will always perform as good as the day it

was purchased. Contact your authorized

PPI

dealer about obtaining any war-

ranty service through

PPI

. (See Warranty inside back cover.)

CAUTION!

The extended use of a high powered audio system may result in hearing loss
or damage. While

PPI

systems are capable of "Concert Level" volumes, they
are also designed for you to enjoy at more reasonable levels all of the cre­ative expressions made by musicians. Please stay seated while driving and
observe all local sound ordinances.

Your new speakers incorporate some or all of the following features:

Woven Carbon Fiber Woofer Cones -

This rigid and light
material provides powerful bass and rich midrange without
distortion and cone breakup

Butyl Rubber Woofer Surrounds & Flat Spiders -

Provide low

distortion through the full range of speaker cone motion

Titanium Tweeter Domes -

Will not distort even when driven

with large amounts of power

Composite Tweeter Surrounds -

Eliminates ringing that can

occur with metal dome tweeters while controlling dome motion

Neodymium Tweeter Magnets -

Greater magnetic strength

in a smaller package with higher efficiency

Swivel Tweeter Mounts (not on PPI35.1&40.1) -

Allows you to

focus the accoustical energy for better imaging

Built-in Tweeter Crossover -

Protects and provides a simple

hookup to the tweeter

Acoustically Transparent Speaker Grills -

Protects the speakers

without degrading the sound

Gold Plated Speaker Terminals -

Provides a corrosion free

high integrity connention

Professional Mounting Hardware, including Speaker Cable

Your coaxial system includes the following:

1 - pair of coaxial speakers
1 - pair of 2-piece speaker grilles with adhesive (not with PPI35.1)
1 - pair of stick-on logos for the grilles
1 - pair of 2-conductor speaker cable (20 feet each) with push-on

speaker terminals
8 mounting screws ( 4 mounting screws for the PPI35.1)
8 speed clips (4 speed clips for the PPI35.1)

1

2

PPI35.1

Woofer Size 3.5 in
Tweeter Size .75 in
Swivel Tweeter No
Maximum power handling 50 Watts
Nominal power handling 20 Watts
Frequency Response 150 - 20 kHz
Efficiency @ 1W/1M 86.75 dB
Xmax .18 mm
Woofer Voice Coil Diameter .75 in
Woofer Magnet Weight 5.35 oz
Impedance 4 ohms
Resonant Frequency 171.5 Hz
Voice Coil Resistance 3.32 ohms
Mounting Depth 1.69 in
Mounting Diameter 3.13 in

3

PPI40.1

Woofer Size 4 in
Tweeter Size .75 in
Swivel Tweeter Yes
Maximum power handling 80 Watts
Nominal power handling 40 Watts
Frequency Response 70 Hz - 22 kHz
Efficiency @ 1W/1M 90 dB
Xmax 1.5 mm
Woofer Voice Coil Diameter 1 in
Woofer Magnet Weight 8 oz
Impedance 4 ohms
Resonant Frequency 134 Hz
Voice Coil Resistance 3.8 ohms
Mounting Depth 1.87 in
Mounting Diameter 3.68 in

4

PPI46.1

Woofer Size 4 x 6 in
Tweeter Size .75 in
Swivel Tweeter Yes
Maximum power handling 80 Watts
Nominal power handling 40 Watts
Frequency Response 70 Hz - 22 kHz
Efficiency @ 1W/1M 89 dB
Xmax 2 mm
Woofer Voice Coil Diameter 1 in
Woofer Magnet Weight 8 oz
Impedance 4 ohms
Resonant Frequency 100 Hz
Voice Coil Resistance 3.9 ohms
Mounting Depth 2.06 in
Mounting Diameter N/A

5

PPI52.1

Woofer Size 5.25 in
Tweeter Size .75 in
Swivel Tweeter Yes
Maximum power handling 90 Watts
Nominal power handling 45 Watts
Frequency Response 60 Hz - 22 kHz
Efficiency @ 1W/1M 88 dB
Xmax 2.5 mm
Woofer Voice Coil Diameter 1 in
Woofer Magnet Weight 10 oz
Impedance 4 ohms
Resonant Frequency 105 Hz
Voice Coil Resistance 3.9 ohms
Mounting Depth 2.37 in
Mounting Diameter 4.65 in

PPI57.1

Woofer Size 5 x 7 in
Tweeter Size .75 in
Swivel Tweeter Yes
Maximum power handling 90 Watts
Nominal power handling 45 Watts
Frequency Response 50 Hz - 22 kHz
Efficiency @ 1W/1M 91 dB
Xmax 2.5 mm
Woofer Voice Coil Diameter 1 in
Woofer Magnet Weight 10 oz
Impedance 4 ohms
Resonant Frequency 70 Hz
Voice Coil Resistance 3.8 ohms
Mounting Depth 2.37 in
Mounting Diameter N/A

6

7

PPI65.1

Woofer Size 6.5 in
Tweeter Size .75 in
Swivel Tweeter Yes
Maximum power handling 100 Watts
Nominal power handling 50 Watts
Frequency Response 40 Hz - 21 kHz
Efficiency @ 1W/1M 91 dB
Xmax 3 mm
Woofer Voice Coil Diameter 1 in
Woofer Magnet Weight 13 oz
Impedance 4 ohms
Resonant Frequency 65 Hz
Voice Coil Resistance 3.8 ohms
Mounting Depth 2.81 in
Mounting Diameter 5.62 in

8

PPI69.1

Woofer Size 6 x 9 in
Tweeter Size 1 in
Swivel Tweeter Yes
Maximum power handling 150 Watts
Nominal power handling 75 Watts
Frequency Response 50 Hz - 21 kHz
Efficiency @ 1W/1M 92 dB
Xmax 2 mm
Woofer Voice Coil Diameter 1.5 in
Woofer Magnet Weight 20 oz
Impedance 4 ohms
Resonant Frequency 50 Hz
Voice Coil Resistance 3.9 ohms
Mounting Depth 3.25 in
Mounting Diameter N/A

Route wires around any
obstructions such as pedals
and levers under the dash

Protect all wires from chaffing
by avoiding sharp turns and
using grommetts where they
pass through metal

When cutting into panels
inspect for any hazards such
as computers or wiring harnesses

The installation of your new

PPI

coaxial speakers should be relatively
simple; especially if you are replacing factory speakers of the same size.
However, if you are installing your speakers where there are not any
currently installed or if you are planning to install speakers larger than the
factory speakers, the process will be more difficult. If this is the case, we
strongly recommend a professional installation by your authorized

PPI

retailer.

Your

PPI

coaxials are shipped with all the hardware you should need for
proper installation. Although, as with most installations, you may not use
all of the pieces. We recommend that you keep everything including this
owners manual and the original packing in case you decide to move the
speakers into another vehicle that may require a different type of
installation.
Before starting the installation make sure the system is operating properly.
Test the balance, fader and volume controls to ensure your system is
functioning properly. If everything is fine, proceed with the installation;
otherwise, locate the problems and have them repaired.

Replace all screws and fastners
securely to avoid potential noise
or other mishaps

9

The first step is to gain access to the existing speaker. This will involve
removing a grille or a panel. Use extreme caution when removing anything
from your vehicle since hidden screws or mounts may have been used by
the factory.
When prying loose any panels be careful not to cause any breaks or cracks.
Once the grille or panel has been removed place it in a safe area until the
installation is finished. Next, remove the hardware securing the factory
speaker and set it aside. Gently remove the speaker from its mounting
baffle far enough to unplug the factory wires from the back. The speaker
can now be completely removed.

If you are not running new speaker cable, the factory wires can be
connected to your new

PPI

coaxial by installing new crimp-on terminals
(not included) on the existing wire or by splicing a short length of the
provided cable (the end with the terminals) to the factory wires.
If possible match the polarity of the factory cables to the new cables,
otherwise, make sure to connect the new wires the same way on each
side. Your

PPI

coaxial speakers can now be connected to the
wires, by gently pushing the wire terminals onto the speaker terminals.
Note that the smaller terminal is the negative lead and the larger is the
positive lead.

Do not connect either speaker lead to ground or to a 12 volt power
source. Your speakers, amplifier, or head unit can be damaged!

Once the speakers have been wired they can be mounted to the speaker
baffle using the factory hardware or the

PPI

supplied mounting equipment.
Use whichever will work best for your needs.
Now that the speaker is wired and mounted the system should be tested
for proper operation. If it is operating properly the grille or panel can be
reinstalled and the next speaker can be installed. If the system is not
working as it should refer to the troubleshooting chart on page 12.
Reinstall the grille or panel by reversing the steps followed in the removal
of the component. Install all screws and fasteners securely to avoid
potential rattles and other problems. The remaining speakers can be
replaced by following the same steps.
If a non-factory installation is your choice, be careful when cutting into
your vehicle. Make sure any panels that are to be cut are free of any
obstructions on both sides. Look for anything that could be damaged such
as wiring harnesses, computers, or brake and fuel lines. Speaker cables
will need to be run all the way to the amplifier or head unit when performing
a non-factory install. Route the cables safely out of the way of any hazards
such as the pedals and levers under the dash. Use a grommett whenever
the cables pass through metal.

10

11

VERY LITTLE BASS WHEN BALANCE IS CENTERED.

MORE WHEN BALANCE IS MOVED FROM ONE SIDE TO THE OTHER

SPEAKERS SOUND DISTORTED OR SCRATCHY

YES NO

YES NO

YES

YES

NO

Check that speaker leads are
connected to the speaker and
head unit or amplifier.

You are done

Check power and remote turn-on wire
for voltage. Make sure ground wire is
secure.

Check that the speaker leads are not
shorted or contacting ground.

ANY SOUND NOW?

Speakers are wired out of phase.

Check them and reverse the polarity on the improperly wired speaker

Is the battery voltage low?

NO SOUND Is the head unit and / or amplifier on?

Make sure charging system
is properly charging battery

Check speakers for physical damage

Consult your authorized PPI dealer

or call 1-800-62POWER

This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state. PrecisionPower, Inc. (PPI) warrants its products to be free from defects in materials
and workmanship under normal use and service for a period of three (3) years from the date of
original purchase when the unit is installed by an Authorized Dealer . Non-Authorized Dealer installed
products carry a one (1) year parts and ninety (90) days labor limited warranty. The extent and con­ditions of Limited Warranty are as follows:

1. Authorized Dealer Installed Products: PPI will either repair or replace at no charge, to the
original purchaser, any unit which PPI’s examination discloses to be defective and under warranty,
provided the defect occurs within three (3) years from the date of original purchase when the unit is
installed by an Authorized Dealer and the product is returned immediately to PPI. This warranty is
not transferable.

2. Non-Authorized Dealer Installed Products: PPI will either repair or replace at no charge, to the
original purchaser, any unit which PPI’s examination discloses to be defective and under warranty,
provided the defect occurs within ninety (90) days from the date of purchase and the product is
returned immediately to PPI. Warranty claims beyond ninety (90) days for Non-Authorized Dealer
Installed Products will be for parts only and will extend for one (1) year from the date of purchase.
This warranty is not transferable.

3. The date of purchase and proof of Authorized Dealer Installation of a PPI product must be
established by an original sales receipt which must accompany the article being returned for
warranty work.

4. This warranty shall NOT apply to any PPI product found to have the original factory serial
number removed or defaced. All products received (by PPI) for in warranty or out of warranty repair ,
with their original serial numbers removed or defaced, will NOT be repaired and will be returned
to sender, freight collect. Refer to original packaging for the serial number of your component speak­ers.

5. The provisions of this warranty shall not apply to any PPI product used for a purpose for which it
is not designed, which has been repaired or altered in any way, or which has been connected,
installed, or adjusted other than in accordance with the instructions furnished in PPI’s owner’s
manual. Nor shall this warranty apply to any part which has been subject to misuse, neglect, or acci­dent.

6. PPI does not authorize any other persons to assume any other liability in connection with its prod­ucts. THIS WARRANTY IS THE ONLY EXPRESS WARRANTY MADE BY PRECISIONPOWER
APPLICABLE TO ITS PRODUCTS. ANY IMPLIED WARRANTY OR MERCHANTABILITY OR
FITNESS FOR APARTICULAR PURPOSE APPLICABLE TO PRECISIONPOWER PRODUCTS IS
LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY. PRECISIONPOW­ER SHALLNOT BE LIABLE FOR THE INCIDENT AL, CONSEQUENTIAL, OR COMMERCIALDAM­AGES RESULTING FROM THE BREACH OF THIS WRITTEN WARRANTY. Some states or
provinces do not allow the exclusion or limitation of incidental or consequential damages or limita­tions on how long an implied warranty lasts; so the above limitations or exclusions may not apply to
you.

7. Your product will be serviced on an in-warranty basis within the warranty period for the
correction of warranted defects. If improper operation of your PPI product should occur, contact your
Authorized Dealer for assistance with the return and factory repair of your PPI product. If an
Authorized Dealer is not available, return the unit including your name, telephone number, return
address, a copy of your sales receipt, and a description of the problem to:

Precision

Power

, Inc.

Service Department

4829 S. 38th Street

Phoenix, AZ 85040-2964

TO RETURN PPI PRODUCTS OUT OF WARRANTY: Return the unit, postage
prepaid, in the original protective carton. Please include a description of the
problem and, if desired, a request for an estimate of repair costs. Unless a
request for an estimate is included, the unit will be repaired as necessary.
Please contact PPI Customer Service at 1-800-62-POWER for questions
concerning out of warranty repair charges. Repaired unit will be returned with
an itemized statement, C.O.D.