Powerware POWERGUARDIAN SERIES Installation Instructions & User Manual

INSTALLATION

INSTRUCTIONS

& USER MANUAL

POWERGUARDIAN SERIES

Multi-Stage Receptacle Protection

INTRODUCTION

The PowerGuardian Transient Voltage Surge Suppressors are used for the protection of both AC equipment and,
with the addition of snap-in protection modules, data communication lines.

INSTALLATION

WARNING: The duplex outlet must be grounded.

3 OUTLET PLUG-IN INSTALLATION

1. Unplug the equipment to be protected from the duplex receptacle.

2. Plug the PowerGuardian unit into the upper receptacle.
Note: The PowerGuardian covers the duplex receptacle cover.

3. Plug the equipment to be protected into the receptacles on the PowerGuardian.

3 & 7 OUTLET POWER STRIP INSTALLATION

1. Identify the equipment to be protected by the PowerGuardian unit.

2. Plug the PowerGuardian power cord into a convenient grounded AC outlet.

3. Plug the equipment to be protected into the receptacles on the PowerGuardian.