PowerWalker VI 600 SCL User Manual

ENGLISH

PowerWalker VI 400-800 SCL

PowerWalker VI 1000 SCL

PowerWalker VI 1500-2000 SCL

A. Output sockets
B. AC input
C. Fuse / circuit breaker
D. USB port with HID support
E. Ethernet line surge protection
F. Cooling fan (only for 1500-3000 VA

models

PowerWalker VI 3000 SCL

1. Output sockets

2. AC input

3. Circuit breaker

4. Ethernet line surge protection

5. RS232 port

6. USB port

You can turn on and turn off the unit by pressing the power switch.
Models in the range 400-2000 VA have touch display. You can change
the display content by touching it. If the backlight shuts off, you may
activate it by touching the screen.
PowerWalker VI 3000 SCL does not have touch display, all available
data are shown on the screen.

UPS

Mode

VI 400-2000 SCL

touch display

VI 3000 SCL

display

Description

Power on

When UPS is powered on, it will enter this
mode for few seconds.

Standby
Mode

No output is provided.

Back Panel:

PowerWalker VI 600-3000 SCL

Quick Guide

Usage:

Display:

ENGLISH

Line
Mode

The screen displays output voltage, input
voltage, load level and battery capacity.

AVR
Mode

blinks

blinks

Voltage regulation activated
Overload

blinks

blinks

When overload occurs, alarm will beep
every 0.5s

Battery
Mode

blinks

blinks

Output voltage is generated from the
battery. Alarm will beep every 10s.

Fault Code

Fault condition

Solutions

or F03 or F05

Internal Error

Alarm will continue beeping. Contact technical
support.

F01 / F02

Output short-circuit
/ overload

Disconnect the loads and restart the UPS.
F04 or beeping every 2s

Weak battery

Please replace the battery.

F06

Over-temperature

Turn off the unit, wait until it cools down and
change to a better ventilated environment.

Model

VI SCL Series

Input

Voltage

230 VAC

Voltage Range

162-290 VAC

Frequency Range

60/50 Hz (Auto Sensing)

Output

Voltage Regulation

+/-10%

Transfer Time

Typical 2-6 ms

Waveform

Simulated Sine Wave

Protection

Overload, discharge, and overcharge protection

Humidity

0-90 % RH @ 0-40° C (non-condensing)

Noise Level

Less than 40 dB

Model

VI 400 SCL

VI 600 SCL

VI 800 SCL

VI 1000 SCL

VI 1500 SCL

VI 2000 SCL

VI 3000 SCL

Power
Capacity

400VA
240W

600VA
360W

800VA
480W

1000VA
600W

1500VA
900W

2000VA
1200W

3000VA
1800W

Batteries

4.5Ah x 1

7Ah x 1

9Ah x 1

7Ah x 2

9Ah x 2

9Ah x 2

9Ah x 2

Charging

6 hours recover to 90% capacity

6-8h to 90%

Dimension
(DxWxH)

300mm x 101mm x 142mm

320mm x 130mm x 182mm

397 x 146 x 205

Net weight

3.7kg

4.4kg

5.0kg

8.2kg

10.4kg

11.0kg

11.5kg

Troubleshooting

Specifications