PowerWalker VI 600 CSW, VI 800 CSW, VI 1000 CSW, VI 1200 CSW, VI 1500 CSW User Manual

Line Interactive
VI 600-1500 CSW
HID (Human Interface Device) support for USB
communication without additional software (supported by internal system drivers)
Voltage Regulator with Pure Sine Wave output USB charging ports (2.1A) Easily replaceable batteries via front panelAuto-dimming LCD panel
MODEL VI 600 CSW VI 800 CSW VI 1000 CSW VI 1200 CSW VI 1500 CSW
Power (VA) 600VA 800VA 1000VA 1200VA 1500VA Power (W) 360W 480W 600W 720W 900W INPUT Voltage 230Vac Voltage Range 170-280Vac Frequency Range 50/60Hz (Auto) OUTPUT Voltage Regulation 230Vac ±10 % Frequency Range 50/60Hz Transfer Time AC to Battery Waveform (Bat. Mode) Protection Discharge, Overcharge and Overload Protection BATTERY Type 1x 12V / 7Ah 1x 12V / 9Ah 1x 12V / 10Ah 2x 12V / 7Ah 2x 12V / 9Ah Recharge Time 6-8h to 90% after complete discharge Protection Battery Discharge, Overcharge and Overload Protection CONNECTIONS AND COMMUNICATION Output 4x Schuko or 4x French or 8x IEC Protection Port RJ11/RJ45 (Ethernet Surge Protection) Software ViewPower Communication Ports 1x USB port with HID support Charger Ports 2x USB port 5V/2.1A (shared)
Typical 6 ms, maximum 10 ms
Pure Sine Wave
PowerWalker VI CSW is a line­interactive UPS series with state of the art technology and design. The integrated AVR function and pure sinewave output ensures clean and stable output during power outages or voltage fluctuations. The UPS functions can be monitored and controlled via USB communication, either with a software or without (HID).
The modern and elegant design makes the VI CSW series especially suitable for home and office use. Applications include (but are not limited to) gaming and entertainment systems, office workstations, NAS etc.
Two USB charging ports (2.1A) in the front offers additional functionality and convenience. Furthermore, the design allows easy access to the battery compartment via the front panel for easy battery replacement.
Loading...