Product Information
10000VA/9000Watt Online UPS with high PF 0.9
Terminal Outlet , EPO, Intelligent Slot
USB & RS-232 Connection for monitoring
Optional: SNMP module, AS/400 card, Modbus card,
Battery Pack, Parallel Kit
Product Features
With its true double-conversion online UPS design,
PowerWalker VFI 10000CP 3/3 provides powerful and overall protection
to your sensitive devices. With its 3 phase in and 3 phase out it can
balance the power consumption from all incoming lines and creates a
stable power output for equipment with even high power consumption.
Multiple communication ports allows to integrate the UPS in existing
structures. Extended back-up time by optional additional battery packs.
• True double-conversion with pure sine wave output
• High output power factor 0.9
• Monitoring software included
• Wide input voltage range (190-520VAC 3at 50% load)
• Input power factor correction
• Output THD≤5% (non-linear load), Output THD ≤2% (linear load)
• 50/60 Hz frequency converter mode
• ECO mode operation for energy saving
• Emergency power off (EPO) function
• Integrated maintenance bypass switch
• Accepts dual-mains input
• Optional: Isolation Transformer offers full isolation and complete
common mode noise rejection (installation during production only)
• Optional: N+X Parallel Redundancy Kit for up to 3 UPS of same size
• Optional: SNMP module, Dry Contact AS/400 card, Modbus card,
External Battery Pack;
Backup time with
internal batteries
25% load 35 min
50% load 9.7 min
75% load 6.0 min
100% load 3.3 min
PowerWalker VFI 10000CP 3/3
Online UPS
PowerWalker is a brand of:
BlueWalker GmbH Phone: +49 (0) 2137 / 92 98 73 • Fax: +49 (0) 2137 / 78 73 925
Martin-Buber-Strasse 12 • D-41470 Neuss • Germany info@bluewalker.eu • www.bluewalker.eu • www.powerwalker.com
305-478 VAC (3-phase) @100% load
190-520 VAC (3-phase) @50% load
3x 400V (3Ph+N)
208/220/230/240VAC(Ph-N)
Frequency
(Synchronized range)
≤ 2% (Full Linear Load)
≤ 5% (Non-Linear Load)
100%~110%: 10min
110%~130%: 1min
>130% : 1sec
100%~110%: 30sec
110%~130%: 10sec
>130% : 1sec
Zero (when phase lock fails, <4ms)
20x in 1 string (18-20 adjustable)
UPS status, Load level, Battery level,
Input/Output voltage, AC mode,
Battery mode, Bypass mode,
Fault conditions
Yes, up to 3 UPS (optional)
Yes, for mains and bypass
with dual input
Software & System Requirements
For details visit:
http://www.powerwalker.com/viewpower.html
Always on, automatic speed control
PowerWalker VFI 10000CP 3/3,
Manual, USB cable, Software CD ;
24 Month (except battery)
Technical Details
Product Information
PowerWalker is a brand of:
BlueWalker GmbH Phone: +49 (0) 2137 / 92 98 73 • Fax: +49 (0) 2137 / 78 73 925
Martin-Buber-Strasse 12 • D-41470 Neuss • Germany info@bluewalker.eu • www.bluewalker.eu • www.powerwalker.com