Page 1
PoE Standard
BlueWalker GmbH | Hellersbergstrasse 6, 41460 Neuss, Germany | Tel.: +49 2131 206 17 59
Internet
10M/100M
Nominal Mode Output Voltage
37-57 VDC (PoE Standard)
Backup Mode Outp ut Voltage
48VDC +/- 1%
Output Power
15.4W max
Acceptable Input Voltage
37-57 VDC
Input Power
30W Ma x
Battery T ype
Li-ion 36.47Wh / 14.4V
Backup T ime
90min @ 15.4W / 180min @ 8W
Recharging Time
7h to 90%
POE Stand ard
802.3af / 802.3at
EMC
EN55032 Class B
LI Battery
IEC 62619
ME
ISTA 2A and EN60950
Operation Temperature
0 to 40 degC
Storage T emperature
-20 to 45 degC
IP
IP 30
When it comes to dedicated security and surveillance systems
E line (data + power), allowing the
backup system.
PowerWalker Smart PoE UPS
• PoE standard 802.3af/802.3at - 48VDC with load
detection
• Single cable input (Data + Power) – suitable for remote
installations
• High-performance Lithium Battery
• A wall-mount plate included
connectivity issues may not only be caused by accidental events (such as
blackouts or network problems), but you also need to be prepared for
intentional and malicious attacks.
PowerWalker Smart PoE UPS is a compact device, designed specifically
to safeguard your PoE camera from loss of connection. It is powered
and charged from a single Po
installation right next to the camera.
With the PowerWalker Smart PoE UPS, you essentially transform each
PoE camera with memory capacity into a security network with its own
TECHNICAL SPECIFICATION
SERIES
PowerWalker Smart Po E UPS
25/01/2019
Loading...