Powersolve ESB00351 User Manual

115/

230Vac

35A

peak

24,8A

eff

-20°C...+70

°C

•

ESB00351 DIN Rail

Made in Germany
Electronic Inrush Current Limiter

Short Specification:

Input 115Vac or 230Vac

• DIN-Rail TS35 mounting

• Screw terminals for 22...6AWG

• Self-powered

• Integrated bypass relay

• Undervoltage detection 100ms standard

• Inrush current limitation 150ms standard

• Maintenance free

• IP20 metal housing

• Power LED

• No simple NTC circuit !

Powersolve Electronics Ltd., Unit 8A Arnhem Road, Newbury RG14 5RU, United Kingdom
Tel [phone] Fax [phone]

(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)

www.powersolve.co.uk [e-mail]

The ESB00351 is an inrush current limiter for
complex automation systems and machinery.
It provides high recommended and trouble
interference free operation.
It is simple to integrate into existing
equipment.

In accordance with IEC60950-1

p.1/2 10.12A

Powersolve Electronics Ltd., Unit 8A Arnhem Road, Newbury RG14 5RU, United Kingdom

Tel [phone] Fax [phone]

(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failu

AC-Input 184

…265V

ac or

85...132Vac

AC Voltage

Rating

230Vac

or 115Vac

AC Current

Rating

30A continuous

Order codes

230Vac ESB00351T

ESB00351

Operating Cycles

3cycle

s/60sec

Current

Limitation

35Apeak / 24,8Aeff

Tolerance Limitation

± 5%

Temperature Drift

Within limitation tolerance

Capacitive Load

10000uF max

Limitation Time

T

= 150ms standard

Undervoltage Detect

T

= 100ms standard

Cooling

Natural convection

Ambi

ent Temperature

-20°C...+70°C

Storage Temperature

-40°C...+85°C

EMI EN55022 class B / EN61000

EMS EN61000

-6-

2,3

Safety

cUL60950/1950 (IEC)EN60950

Safety class 1(A)

VDE0805, VDE0100

Creepage Distance

> 4mm

MTBF IEC61709

600000h

Dimensi

ons (HxWxD)

65x124x99.5mm

Weight

800g

Connectors

Spring type 22...6AWG

*

Inrush Current Limitation

Time :

from 100…300ms (150ms standard)

factory adjustable from 50…150ms (100ms standard)

your order. If no limitation time is

Running as a real peak current limiter the ESB

arting consumer loads.

line while thunderstorms

or mechanical damages are caused to the electricity network.

When the mains supply returns indefinable stress peaks arise

to the system loads as high that the automatic cir

actuate. In decentral automation this often leads to services

is an accurate tool to

prevent system break downs. The

limits all power up current peaks

The ESB00351 is also designed to be integrated

DC power supplies running in parallel

operation mode. While causing stress peaks up to

all circuit breakers and ele

The ESB00351 allows to

reduce cabling sections and to install fast responding circuit

is a perfect and cost

to prevent infringe upon rights and norms.

is a powerful tool to cut down cost of system

In accordance to the

, the ESB

accurate performance to the energy balance of an electrical

e cabling section in

accordance to the international directives. It allows smaller and

responding circuit breakers. In usage with shutdown

reduce energy consumption of

g with VDE approved

Rail: although no tool is necessary to snap

DIN/EN60715

[e-mail]

re or malfunction could result in injury or death)

, 47…63Hz

.

*

*

-3-2

-1

AC

L PE

AC

115Vac

on
out

Ton factory adjustable
Tout
Please ad desired limitation time to
added, standard times will be adjusted by factory.

Application:

The inrush current limiter ESB00351 is
solution.
cuts off all current peaks while st
Extreme conditions occur on the AC-

T.115VAC

Connection Terminals:

PE = GND
Input L
N

Output PE = GND
L
N

no simple NTC-

00351

and high cost. Therefore the ESB00351
reduce cost and to
ESB00351
continuous operation up to 30A.

capacitive loads like AC­hundred Amperes

installations would be overloaded.
breakers, however. Hence the ESB00351

effective instrument
The ESB00351

current consumption for the operator.

European EuP2005/32/EC directive

system. The ESB00351 can reduc
faster

energy feed-ins it can help to
every system.

Mechanics:

Stable IP20 metal housin
Safe snap on DIN­on or demount it from the TS35-Rail (
A wall mount kit is available upon request.

cuit breakers

and provides

into high

several

ctrical network

00351 provides

ventilation slots.

.)

96.0

3.5

124,0

65.0

- OUTPUT

ESB35

electronic
current limiter

- INPUT

PE

3.4

N

Power

L

N

62,0

www.powersolve.co.uk

p.2/2 10.12A