Page 1
M30D
2-Channel Power Amplier for Portable and Permanently Installed Applications
®
▶ Small to medium-scale systems,
portable and installed
▶ Subwoofers
▶ Fullrange loudspeakers
▶ Hotels, restaurant and bars
▶ Amusement parks, themed
entertainment
▶ Houses of worship, auditoriums
▶ Educational facilities
▶ Live and dance clubs
▶ Mobile DJ’s
Equally versatile in both portable and
installed system congurations and with
delivering up to 3,000 W out of one
single rack unit weighing just over
7 kg / 16 lb, the M30D is a exible,
cost-effective solution for small to
medium sound systems.
Benetting from core technologies
of Powersoft’s agship K Series,
the M30D sets a class standard
in efciency, leading to low power
consumption, and consequently to
substantial money savings on electricity,
all in an eco-friendly way.
Minimum heat dissipation makes the
M30D suitable for hot or otherwise
challenging environments.
Added the legendary sound quality
thanks to Powersoft’s unique, patented
Class D output stage design, the M30D
represents a fantastic value, practically
as well as commercially.
The M30D comes with 4 years
warranty and, like all Powersoft
products, is entirely designed and made
in Italy.
2-channel mode mono-bridged mode
4 Ω / Ch 8 Ω / Ch 70 V
1)
100 V
2)
8 Ω / Ch pair
1,500 W 900 W 1,200 W 1,500 W 3,000 W
EIAJ Test Standard, 1 kHz, 1% TH D
Legendary Powersoft efciency:
▶
Compact and space saving: 1 RU at 358 mm / 14.1’’ depth
▶
Green Audio Power®: minimal “carbon footprint” and operational cost of
electricity
▶
Plenty of power, little weight: up to 3,000 W in 7.3 kg / 16 lb
Unique Powersoft technology for efcient, reliable performance:
▶
Switch mode power supply, internally switchable 230/115 V nominal
▶
Fixed frequency switch mode amplier output stages
▶
Patented amplier output lters with ripple cancellation network
Driving distributed line systems:
▶
Able to drive 100 V distributed lines directly without the need for
transformers
1)
Optimized for 4 Ω loads, thus ideally matching real-world scenarios in targeted
applications
Fully protected circuit design:
▶
AC protection: shuts down power supply when AC mains voltage is outside
operating range
▶
Clip limiter: prevents severely clipped waveforms from reaching
loudspeakers, while still maintaining full peak power output
▶
DC protection: protects against infrasonic signal at the outputs
▶
VHF protections: protects the loudspeakers against destructive non-audible,
non-musical high frequency signals
▶
Shor t circuit protection: protects the amplier from short circuit or similar
events on the outputs; with automatic protection reset
▶
Thermal protection: mutes outputs once output devices reach 75 ºC / 167 ºF;
automatic unmute once temperature is down to 65 ºC / 149 ºF
Temperature controlled continuous variable speed fan, front to rear airow
Recessed stepped level attenuators
Full four years warranty
Also available as M30D HDSP+ETH with integrated DSP and Ethernet comm
port
powersoft_m30d_data_en_2.4
1) Exte rnal hig-pass lter and voltage limiter required .
2) Externa l high-pass lter r equired.
Page 2
M30D
2-Channel Power Amplier for Touring and Install Applications
PAT. PEND.
Made in Italy
Specications
General
Number of channels 2
Output power 2-channel mode mono-bridged mode
EIAJ Test Standard, 1 kHz, 1% TH D 4 Ω / Ch 8 Ω / Ch 70 V
1,500 W 900 W 1,200 W 1,500 W 3,0 00 W
Max output voltage / current 135 V
AC Mains Power
Power supply Universa l, reg ulate d switch mode
Operating voltage / I nrush current 115 V / 230 V (fac tor y sele ction) ± 15%, 50 Hz - 60 Hz / < 28 A
Consumption / current draw @ 230 V @ 115 V
Idle 37 W 0.3 A 37 W 0.6 A
I/8 of max output power @ 4 Ω 530 W 3.5 4 A 530 W 7 A
I/4 of ma x output power @ 4 Ω 1,024 W 6.52 A 1,024 W 13.04 A
peak
1)
/ 65 A
peak
100 V
2)
RMS
8 Ω / Ch pair
Thermal
Audio
DSP (optional)
Front Panel
Rear Pa nel
Construction
Environment al operating temperature 0° - 45° C / 32° - 113° F
Thermal dissipation Fan, continu ously variable sp eed, temperature cont rolled, front to re ar air ow
Idle 126 BTU/h 32 kcal /h
I/8 of max output power @ 4 Ω 529 BTU/h 133 kcal/h
I/4 of ma x output power @ 4 Ω 935 BTU/h 236 kcal/ h
Gain 32 dB, 30 dB, 28 dB, 26 dB, 24 dB , 22 dB , 20 dB, 18 dB, 14 dB, 4 dB, - ∞, user selectable
Frequency response 10 Hz - 30 kHz (1 W @ 8 Ω, ± 3 dB)
S/N ratio (amplier se ction) >11 dBA (20 Hz - 20 kHz, A weighted)
Crosstalk separat ion >70 dB @ 1 kHz
Input sensit ivit y @ 8 Ω 2.13 V / 8.8 dBu
Max input leve l 6 V / 17.7 dBu
Input impedance 10 k
THD+N / S MPTE IMD � 0.07% @ 1/2 of full power
DIM100 IMD typ. <0.005% (<0.02% @ >0.1 W)
Slew rate 40 V/µs @ 8 Ω, input lter bypa ssed
Damping factor @ 8 Ω >500 0 @ 100 Hz
A/D converter
D/A converter
Frequency response @ -3 dB 7 Hz - 22 kHz
THD < 0.01% (20 Hz - 20 kHz)
Presets Bank of 4 prese ts, management and upload via Ar monía Pro Aud io Sui te™
Delay for time alignment 10 ms per ou tput
Crossover lters But ter wor th, L inkwit z-Ri ley, Bessel, 6 dB/oct to 48 dB/oc t
Output equalizer up to 12 biquad fully par ametric per channel: peak ing, hi /lo shelving, hi/lo pass, band pass, band s top, all pa ss; suppor t for custom
Input equalizer up to 5 biquad lters (PEQ, sh elving, ban d pass , band s top, al l pass)
Limiters
Damping control
System Delay
Indicators 4 LEDs per channel: 3 x green, 1 x red
Controls
Maintenance
Audio signal in put connectors
Loudspeaker output connec tors 2 x Neutrik ® Spea kon NL4M D, 2 x Neu trik® XLR male hard-wired to the cor responding input
Network dat a port E thernet
DSP preset selection 1 x Pushbu tton (stepping thr ough bank of 4 presets)
Aux volt age
AC mains
Controls
Dimensions W 483 mm / 19”, H 44.5 mm / 1 RU, D 358 mm / 14.1”
Chassis 1 mm (0.04”) steel chassis a nd ste el removable dust cover, 3 mm (0.12”) s teel front panel, screw hole protect ion, s teel side
Weig ht
Ω
CS5381, 2 channels, 24 bit / 48 kHz, 120 dB SNR
CS4398 , 2 channels, 24 bit / 48 kHz, 120 dB SNR
FIR lters up to 168 taps per cha nnel (useful for f > 700 Hz)
Peak limiter, RMS limiter, frequen cy dep ende nt RMS limiter
< 120 Hz, range ± 2 Ω
up to 170 ms for 2 IN/2 OU T or 340 ms for 1 IN/2 OUT
2 status LEDs: 1 x gre en, 1 x yellow
1 stepped level attenuator pot per channel; ma ins switch
Dust lter foam behind front pan el
2 x balan ced Neu tri k® XLR female
1 x RJ45 with ac tivity LED with 2 rotary address switches
1 x 4 LED pr eset indicators
1 x 2-pin Phoenix type MC 1.5/2-ST-3.81
IEC C13 16 A connector; AC ma ins cord with 3 -pin plug 15 A for US , IEC Schuko 16 A for every other na tion
1 x link switch, link ing analog inputs 1 & 2
reinforcement & rear suppor t
7.3 kg / 16 lb
1) Exte rnal high- pass lter and output volt age limiter requir ed.
2) Externa l high-pass lter r equired.
Powersoft S.r.l. • Via Enrico Conti, 5 • 50018 Scandicci (FI) • Italy
+39 055 735 0230 • [email protected] • www.powersoft-audio.com
Data is subject to change wit hout notice.
© 2012 Powersof t • All rights reserved.
Loading...