powersoft LiteMod, LiteMod HV Quick Manual

®

Via Enrico Conti, 5

50018 Scandicci (FI)

www.powersoft-audio.com

Technical Support

Should you encounter any difculties in operating this amplier
module, please do not hesitate to contact our technical support.
We will be glad to be of assistance.

[e-mail]

Powersoft
Via Enrico Conti, 13/15
50018 Scandicci - Firenze

Italy

Tel/fax: [phone]

LiteMod

The LiteMod and LiteMod HV are compact and powerful

switching mode amplier modules.
LiteMod is a exible platform designed to t into active
monitors, two ways loudspeakers and small/medium subwoofer.
Capable of unrivaled sonic performances, the highest dynamic

range and low distortion, LiteMod provides high clean output
power thanks to the last generation compact PFC power supply,

guaranteeing reliability and consistency in all operating conditions
and low power consumption (less than 0.55 W in standby).

Specications

AC Mains Powe r

Oper ating voltage - a uto switch

AC 100 V – 240 V ± 10% ,

50/60H z

Efciency > 75% (typi cal)

Power cons umption

I/8 of max p ower @ 4 � 220 W

Max aux s upply curre nt draw @ +12 V 500 mA

Max aux s upply curre nt draw @ –12 V 200 mA

Max aux s upply curre nt draw @ +5 V 100 m A

Max environmental operating temperature 40 °C (104° F)

Construction

Dimensions

230 mm x 80 m m x 43,5 mm

(9” x 3.1” x 1.7” )

Weight 870 g (1.92 lb)

Quick Guide LiteMod

Via Enrico Conti, 5

50018 Scandicci (FI)

www.powersoft-audio.com

PL1001

1 SDPWS

2 RESERVED

3 RESERVED

4 +5VDCOUT

5 GND

6 IN 1 +

7 IN 1 –

8 GND

9 VOUT1MO N

10 PR OTECT1

11 IOU T1MON

12 TEMPMON

13 +12VDCOUT

14 -12VDCOUT

15 MUTE

16 +VCCMO N

17 -VCCMON

18 -VC CMON

19 +VCCMO N

20 MUTE

21 -12VDCOUT

22 +12VDCOUT

23 TEMPMON

24 IOU T2MON

25 PROTEC T2

26 VOU T2MON

27 GND

28 IN 2 –

29 IN 2 +

30 GND

31 +5VDCOUT

32 R ESERVED

33 RESERVED

34 SDPWS

PL1000

1 +CH2OUT

2 –CH2OU T

3 –C H1OUT

4 +CH1O UT

PL1

1 ACM AINSL

2 not connected

3 ACM AINSN

PL2

1 GND

2

+12 V, 150 mA

3 GND

LiteMod and LiteMod HV

powersoft_Lite Mod_quickguide_en_v1.1

CODE NAME TYPE

PL1001 Input connector IDC socket 34 pin

PL1000 Output connector JST B4P-VH

PL1 AC Mains JST B3P-VH

PL2 FAN Molex 22-27-2031

43,5

230

220

6 x M4

50

4

80

70

IN 1+

IN 1–

IN 2–

IN 2+

AC MAINS GND

PL1

PL2

PL1001

L

N

1

Audio OUT

PL1000

234

Channel 1

Bridge mode

Channel 2