Power Soak PS-SWD-50 User Manual

Power Soak Systems, Inc.

ITEM#__________________________

_

903 E. 104th Street Suite 130
Kansas City , MO 64131
Ph: 816-222-2400

www.powersoak.com

PS-SWD-50

SPECIFICATIONS

Drop-In Silverware Pre-Washing System Drop-In

Optional Splash Guard

Application

Recommended For All Customer Operations,
(Excluding Most Silverware Chutes) and where unit is
not be moved for operation. Installs in dish table using
a bolted, gasketed flange.

Note: Must be Hard Plumbed & Wired.

Standard Specifications

Structural:

• 304 stainless steel construction with 14 gauge tank,
legs, and rim.

• Mounting bracket and mounting studs for control
panel included. Enables easy mounting of control
panel to wall, dish table or wash tank.

• Minimal footprint.

Electrical:

• 3/4 HP continuous heavy duty (TEFC) motor.

• Pistol grip On/Off mechanical Start/Stop switch with

½” conduit connection.

Plumbing:

• ½” single handle faucet “hot only” included.

• 1 ½” inside diameter ball valve drain provided.

• 11 gallon wash tank capacity.

Operational:

• (2) removable stainless steel wash tank baskets
included.

• 600GPM Recirculation wash flow rate.

Warranty:

•

Three years parts and labor warranty.

(Domestic only)

(2) Removable Wash Tank

Baskets Included

Specify Desired Electrical Service

Electrical Connection: ½” Conduit connection in PS-

50 pistol grip mechanical Start/Stop control box.
 3/4 HP 208/230 Single Phase 5.2/4.8 Full

Load Amps.

For international availability contact Power Soak
Systems.

Options

 Additional wash tank baskets.

Specify number of baskets here _________.

 Splash guard.
 Aluminum basket inserts for tarnish control on

silverplate or sterling silverware. (Box of 2)

Considerations

Electrical:

• Hardwire electrical connection needed.

• ½” conduit connection required.

Plumbing:

• ½” hot water supply line needed for fill source.

• 1 ½” drain line connection.

Operational:

• Low foaming, enzyme based chemical recommended
for optimal washing results.

- PAGE 1 -33627 - 5/19/2010

Patents Pending

Table Cutout Dimensions:

1.85

16.47

Plan View:

BASKET REMOVED
FOR VIEWING CLARITY

1.85

3.00

16.47

3.00

1.85

n

0.88 TYP

SUGGESTED FAUCET
HOLE LOCATIONS

Control Panel Mounting
Bracket Dimensions:

3.330.84

4X n0.38

3.00

18.68

SQR.

9.34

DRAIN

REMOVABLE DRAIN SCREEN

2.59 DRAIN

Elevation View:

6.21

1.67

0.84

Optional Splash Guard:

17.00

12.00

17.00

26.40

Silverware Basket:

16.38 SQR.

6.87

UNDERSIDE OF HEM

TO BOTTOM

OF BASKET

73°

10.82

- PAGE 2 -33627 - 5/19/2010

0.0518 GA

Patents Pending