Powerplus POWAIR0802 User Manual
POWAIR0802 EN
1 APPLIANCE ....................................................................................................2
2 DESCRIPTION (FIG. A) ...................................................................................2
3 PACKAGE CONTENT LIST ............................................................................2
4 SAFETY WARNINGS AND PRECAUTIONS ..................................................2
5 AIR SUPPLY ....................................................................................................4
6 LUBRICATION ................................................................................................4
7 IMPORTANT!!! ................................................................................................4
8 LOADING AND OPERATION ..........................................................................5
8.1 Drill Bit Installation ........................................................................................5
8.2 Using the Air Drill ...........................................................................................5
9 MAINTENANCE ...............................................................................................6
10 TECHNICAL DATA .........................................................................................6
11 NOISE ..............................................................................................................6
12 TROUBLE SHOOTING ....................................................................................7
13 ENVIRONMENT ...............................................................................................8
14 DECLARATION OF CONFORMITY ................................................................9
Copyright © 2014 VARO P a g e | 1 www.varo.com
PNEUMATIC DRILL SET
POWAIR0802
1 APPLIANCE
The Air drill is a compressed air powered, rotary power tool whose out put spindle is
typically fitted with a chuck to hold and drive an accessory such as a drill bit or screwdriver
bit .
Warning Read this manual and general safety instructions carefully before
using the appliance, for your own safety.
2 DESCRIPTION (FIG. A)
1. Trigger
2. Coupler
3. Chuck
4. Reverse knob
3 PACKAGE CONTENT LIST
Remove all packaging materials.
Remove remaining packaging and packing inserts (if included).
Check that the package contents are complete.
Check the appliance, the power cord, the power plug and all accessories for
transportation damage.
Keep the packaging materials as far as possible until the end of the warranty period.
Then take it to your local waste disposal system.
WARNING Packaging materials are not toys! Children must not play with
plastic bags! There is a danger of suffocation!
POWAIR0802 EN
1 x Air drill
10 x twist drill bit
1 x drill bit holder
6 x bits
1 x plastic case
1 x male Euro coupler
If any parts are missing or damaged, please contact your dealer.
4 SAFETY WARNINGS AND PRECAUTIONS
Keep work area clean. Cluttered areas invite injuries.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don't expose to rain. Keep work area well lit. Do not use electrically powered
tools in the presence of flammable gases or liquids.
Copyright © 2014 VARO P a g e | 2 www.varo.com
1 x male Orion coupler
1 x oil bottle (empty)
1 x PTFE sealing tape
1 x BMC
1 x Manual
Keep children away. Children must never be allowed in the work area. Do not let them
handle machines, tools, extension cords, or air hoses.
Store idle equipment. When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
Use the right tool for the job. Do not attempt to force a small tool or attachment to do
the work of a larger industrial tool. There are certain applications for which this tool was
designed. It will do the job better and more safely at the rate for which it was intended.
Do not modify this tool and do not use this tool for a purpose for which it was not intended.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving
parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair.
Use eye and ear protection. Always wear ANSI approved impact safety glasses under
a full face shield while working. Wear an ANSI approved dust mask or respirator when
working around metal, wood, and chemical dusts and mists.
Do not overreach. Keep proper footing and balance at all times. Do not reach over or
across running machines or air hoses.
Maintain tools with care. Keep tools clean for better and safer performance. Follow
instructions for lubricating and changing accessories. Inspect tool cords and air hoses
periodically and, if damaged, have them repaired by an authorized technician. The
handles must be kept clean, dry, and free from oil and grease at all times.
Disconnect air supply. Disconnect air hose when not in use.
Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are
removed from the tool or machine work surface before connecting the tool.
Avoid unintentional starting. Be sure the trigger is released when not in use and before
connecting to the air source. Do not carry any tool with your finger on the trigger,
whether it is connected or not.
Stay alert. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any part
that is damaged should be properly repaired or replaced by a qualified technician. Do
not use the tool if the trigger does not operate properly.
Guard against electric shock. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.
Replacement parts and accessories. When servicing, use only identical replacement
parts. Use of any other parts will void the warranty.
Industrial applications must follow OSHA guidelines.
Do not operate tool if under the influence of alcohol or drugs. Read warning labels if
taking prescription medicine to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
Use proper size and type extension cord. If an extension cord is required, it must be of
the proper size and type to supply the correct current to the compressor without
heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical
damage to the compressor. Check your air compressor's manual for the appropriate
size cord.
Copyright © 2014 VARO P a g e | 3 www.varo.com
POWAIR0802 EN
Loading...