Your grass trimmer has been designed for trimming and finishing lawn edges and to cut grass
in confined spaces.
This tool is intended for consumer use only.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your power tool should
only be given to other users together with these instructions.
2 DESCRIPTION (FIG A)
1. On/Off switch
2. Safety switch
3. Main handle
4. Safety guard
5. Spool housing
6. Cord lock
7. Front handle
3 PACKAGE CONTENT LIST
Remove all packaging materials.
Remove remaining packaging and packing inserts (if included).
Check that the package contents are complete.
Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
Keep the packaging materials as far as possible until the end of the warranty period. Then
take it to your local waste disposal system.
WARNING Packaging materials are not toys! Children must not play with
plastic bags! There is a danger of suffocation!
1 pc safety guard (with screws)
1 pc grass trimmer
1 pc Instruction manual
If any parts are missing or damaged, please contact your dealer.
Denotes risk of personal
injury or damage to the
tool.
Wear eye protection
Read manual before use
Never operate the machine in
the rain or in damp or wet
conditions. Moisture is an
electrical shock hazard.
In accordance with
essential safety standards
of applicable European
directives
Warning! Flying objects
Class II - The machine is
double insulated; Earthing
wire is therefore not
necessary.
Keep bystanders away
Remove plug from the
mains immediately if the
cable is damaged or cut
Wear noise protection
Wear a mask In dusty
conditions
Wear gloves
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions
may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions
for future reference. The term "power tool" in the safety warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool.
5.1 Working area
Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
Do not operate power tools in potentially explosive surroundings, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
Keep children and bystanders at a distance when operating a power tool. Distractions can
cause you to lose control of it.
5.2 Electrical safety
Always check that the power supply corresponds to the voltage on the
rating plate.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
adapter plugs with earthed power tools. Unmodified plugs and matching outlets will reduce
the risk of a lethal electric shock.
Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and
refrigerators. There is an increased risk of a lethal electric shock if your body is earthed .
Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will
increase the risk of a lethal electric shock.
Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of a lethal electric shock.
When operating a power tool outdoors, use an extension cable suitable for outdoor use.
Using a cord suitable for outdoor use reduces the risk of a lethal electric shock.
If operating a power tool in a damp location is unavoidable, use a power supply protected
by a residual current device (RCD). Using an RCD reduces the risk of a lethal electric
shock.
5.3 Personal safety
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention when operating a power tool may result in serious
personal injury.
Use safety equipment. Always wear eye protection. Using safety equipment such as a
dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed
will reduce the risk of personal injury.
Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
Remove any adjusting keys or spanners before turning on the power tool. A spanner or
key left attached to a rotating part of the power tool may result in personal injury.
Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable
you retain control over the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
5.4 Power tool use and care
Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
Maintenance. Check for misalignment or jammed moving parts, breakages or any other
feature that might affect the operation of the power tool. If it is damaged, the power tool
must be repaired. Many accidents are caused by using poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 ADDITIONAL SAFETY RULES FOR GRASS TRIMMERS
Grass trimmers must not be used by children or untrained persons.
Wear stout shoes or boots to protect your feet.
Wear long trousers to protect your legs.
Only connect the appliance to an electric circuit which is protected by an
earth leakage switch (30 mA).
Check the appliance before use. If it is damaged, it must not be used.
If the unit is damaged, have the damage repaired by an authorized repair agent.
Do not use the appliance if the mains cable is damaged or worn.
Before use check the extension cord for possible wear and tear. In case of damage,
immediately remove the mains cable from the wall socket. Do not touch the cable before
the mains cable has been removed from the wall socket.
Do not use the appliance in the presence of children and/or animals.
Only use the appliance in daylight or with good lighting.
Never use the appliance without the guard in place.
Before using the appliance, remove sticks, stones, wire and other obstacles from the
surface on which you intend to work.
Only use the appliance in an upright position, with the cutting line pointing to the ground.
Never switch on the appliance in another position.
Always keep your hands and feet away from the cutting line.
Avoid touching the cutting line.
Make sure that the mains cable does not touch the cutting line.
Before putting the appliance down, switch it off and wait for the cutting line to come to a
complete standstill. Never attempt to bring the cutting line to a standstill yourself.
Beware. After switching off the appliance it continues to rotate for a short
time.
Only use the type of cutting line recommended by the manufacturer. Never use a metal
cutting line or fishing line.
Remove the plug from the wall socket when you have finished, before servicing, or when
the appliance is not being used.
After use, always store the appliance safely and out of the reach of children.
The grass trimmer is supplied with some components not assembled. To assemble these
proceed as follows:
7.1 Mounting the guard (Fig 1)
Screw the protective shield to the device with the 2 screws.
Caution! During this operation beware of the wire cutter blade. You may be
wounded.
Caution! Never use the grass trimmer without the guard. It is vital for your
and other peoples’ safety and for the good working order of the trimmer.
The failure to observe these safety regulations is not only dangerous but
also annuls the guarantee terms.
8 OPERATION
8.1 Correct posture
Hold the device:
With the left hand on the front handle;
with the right hand on the operating handle at approx. hip height;
balanced in a comfortable position.
8.2 Starting/stopping the device (Fig 2)
To start, press the safety switch (1) and the on/off switch (2);
to stop, release the safety switch (1) and the on/off switch (2)
8.3 Information regarding cutting
Only cut with the left-hand part of the cutting area when moving the device from right to
left.
In the right-hand part,the cords rotate in your direction:
Here there is a high risk of return stroke and objects may be slung in your direction by the
rotation of the cord.This may cause injury.
When moving the device from left to right, you must keep the cord away from the grass, so
that no grass is slung away.
Always cut long grass from top to bottom so that it cannot wind itself around the spool.
Cut with care:
Only use the tip of the cord. This uses less cord and avoids grass being caught in the
spool.
Only hold the cord as closely as necessary to posts, walls, fences and similar objects
because this can wear out the cord very quickly.
Bark, young trees and bushes can be damaged by the cord.
8.4 Extending the cord
If the device no longer cuts cleanly, the cords have become too short.
You can achieve the best cutting results when you extend the cords until they are cut by the
cutting knife to the right length.
8.5 Extending the cords during cutting operation
Briefly tap the bottom of the cord spool on the floor while the device is running.
If not extended far enough, tap once again.
The cords will automatically be cut to the right length by the cutting knife.
If the cords have already become too short they will not extend by tapping. You must pull them
out of the cord spool by hand.
Lay the product on the ground.
Press your hand on the bottom of the spool and pull the two cords out until they are
slightly longer than the edge of the protective shield.
The cords are cut to the right length by the cutting knife when used again.
8.7 Changing the cord
It is possible to replace the entire cord spool or just the cord.
8.8 Remove the cord spool (Fig 3)
Unscrew the lock
Remove the cord spool.
8.9 Replace the cord in the cord spool
Remove cord residues from the cord spool.
Roll up the cord in the cord groove.
8.10 Insert the cord spool
Insert the cord spool back into the cord spool housing and turn until the spool is firmly
seated.
Pull out both cords and thread into the cord guide.
Close the lid and screw the lock down tightly.
When used for the first time,the knife automatically cuts the cords to the right length.
9 TECHNICAL DATA
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
If you cannot eliminate the error yourself, please contact service department directly.
Please be aware that any improper repairs will also invalidate the warranty and additional
costs may be incurred.
11 TROOBLESHOOTING
12 CLEANING AND MAINTENANCE
Your tool has been designed to operate over a long period of tome with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular
cleaning.
Warning! Before performing any maintenance, switch off and unplug the
tool.
Regularly clean the ventilation slot in your tool using a soft brush or dry cloth.
Regularly clean the cutting line and spool using a soft brush or dry cloth.
Regularly use a blunt scraper to remove grass and dirt from the underneath of the guard.
13 STORAGE
Store the trimmer out of reach of children, in a stable and safe position and in a dry place
where the temperature is not too hot or too cold.
Store the trimmer away from direct sunlight, if possible in a dark or barely lit place.
Do not store in a nylon bag because this could encourage the formation of damp patches.
Do not store the grass trimmer resting on the floor. Hang it by the handgrip instead, so that
the guard does not touch anything. The resting of the guard on a surface could alter its
shape and therefore its dimensions and its safety characteristics would be modified.
14 WARRANTY
This product is warranted as provided by law for a 24 -month period effective from the
date of purchase by the first user.
This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
You can always obtain more information at the number 00 32 3 292 92 90.
Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
At the same time, no claim can be made on the warranty if the damage of the device is the
Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike,
erroneus net voltage. This list is not exhaustive.
Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.
Devices or parts which are replaced under the warranty therefore remain the property of
Varo NV.
We reserve the right to reject a claim whenever the purchase cannot be verified or when it
is clear that the product has not been properly maintained. (Clean ventilation slots, carbon
brushes serviced regularly, etc.).
Your purchase receipt must be kept as proof of date of purchase.
Your appliance must be returned undismantled to your dealer in an acceptably clean state,
(in its original blow-moulded case if applicable to the unit), accompanied by proof of
purchase.
15 ENVIRONMENT
Should your appliance need replacement after extended use, do not throw it away
with the household rubbish, but dispose of it in an environmentally safe way.
Waste produced by electrical machine items should not be handled like normal
household rubbish. Please recycle where recycling facilities exist. Check with your
local authority or retailer for recycling advice.
is in conformity with the essential requirements and other relevant provisions of the applicable
European Directives, based on the application of European harmonized standards. Any
unauthorized modification of the apparatus voids this declaration.
European Directives (including, if applicable, their amendments up to the date of signature);