SLR12 Straight Line Rip Saw
Fast, accurate and easy to use. The new Straight Line Rip Saw from Powermatic
will fit your production needs.
The Gold Standard Since 1921.
The Gold Standard Since 1921.
Face frames, long runs or full production,
the new SLR12 Straight Line Rip Saw
has every job covered. Powered by a
15 HP main motor, this saw has the
capacity for virtually any job. The 12"
main blade mounts on a high-alloy,
heat-treated arbor that is precision
ground and dynamically balanced
for maximum stability and long
durability.
■ The caterpillar feed
chain blocks are constructed of
special grade cast iron that is heat
treated and precision machined. The
track travels on hardened “V” way
guides insuring rigidity and accuracy.
A full brush cleaning system with
auto-oiler and shut off gives the
conveyor a long service life. All of this
is driven by a 2HP feed motor with
variable speed to perfectly match the
feed rates with your production and
finish requirements.
■ A series of five
stock hold downs keep each work
piece flat and straight throughout the
cutting cycle and dual anti-kickback
devices help to prevent discharge
of the work pieces. The heavy-duty
precision Rip Fence travels on a solid
steel guide rail and is micro adjustable
for fast accurate set-up.
■ Controls
for rip width, cutting depth, main
and feed motors are all mounted upfront for fast job changes. The large
cast iron table surface supports any
size stock and the efficient dust
collection port insures a clean work
area. From the kiln or cutting glue
line, get your production up and
running today with the new SLR12
from Powermatic.
FEATURE
Full cast iron construction
15 HP Main Motor
2 HP Feed Motor
Five stock hold-downs
with dual anti-kickback devices
Variable feed speeds
Auto-oiler with shut off
For conveyor chain
Large 18" rip and 3
3
/8"
depth of cut capacities
BENEFIT
Solid platform for the machine eliminates
vibration and insures accuracy
Accommodates any size job
Keeps the work piece where it belongs,
insures positive feed with glue line
accuracy
Matches your job requirements quickly
Insures long trouble-free service life
Can handle any size job
Caterpillar feed blocks
constructed of special
grade cast iron are
heat-treated and travel
on special hardened and
ground “V” ways. Auto
oiler with shut off insures
long trouble-free conveyor
life. Variable feed speeds
make it easy to get
optimum feed/finish ratio.
The 12"blade is supported
by a Ni-Cr-Mo alloy heattreated arbor that is
precision ground and
dynamically balanced.
Four large diameter
bearings support the arbor
and a full 15 HP is
delivered to the cut. Five
spring-loaded hold-downs
insure accuracy.
Job change over is fast
and easy with convenient
controls for height, width,
conveyor and main blade.
The 4"dust collection
port is mounted right at
the blade for improved
chip collection and a clean
work area.
SLR12 Straight Line
Rip Saw
Precision micro-adjustable
rip fence
Dual anti-kick
back devices
Swing away
control console
and up front
controls
Rugged cast iron construction
Full table conveyor
chain feed
15 horsepower
main motor
The Gold Standard Since 1921.
Model Number SLR12
Stock Number, 3PH 1791285
Main Motor-HP-Voltage-Phase 15-HP 230/460V-3 PH
Feed Motor-HP-Voltage-Phase 2-HP 230/460V-3 PH
Controls 24V Magnetic
Blade Speed 4500 RPM
Feed Speed 30-90 FPM Variable
Arbor Size 1"
Blade Size 12"
Cutting Depth 3
3
/
8"
Max Ripping Width 18"
Pressure Rollers 5
Anti-Kickback Device(s) 2
Table Size 35" x 55"
Table Height 32"
Dust Collection Port 4"
Minimum CFM Required 600
Shipping Weight 2240
Net Weight 2010
Overall Dimensions L x W x H 62" x 56" x 41"
Shipping Dimensions L x W x H 62" x 66" x 45"
PN Accy. Rip Blade 12" x 24T x 1" 6080160
PN Accy. Rip Blade 12" x 36T x 1" 6080161
PN Accy. Glue Blade 12" x 40T x 1" 6080159
Includes the Following: Rip Fence
Rip Blade
Tool Kit
Blade Wrench
Auto Chain Oiler
Dual Anti Kick Back
Full Coverage Guards
Part and Instruction Manuals
SLR12 Straight Line Rip Saw
WMH TOOL GROUP
Industrial Woodworking Machinery Division
427 Sanford Road
LaVergne, TN 37086
1-800-248-0144
www.powermatic.com
Part No. 91-610
Loading...