Powermatic PM2800 User Manual

AVAILABLE IN NOVEMBER 2006

Y E A R

WARR ANT Y

FEATURES

Lighted push button switch with safety key is located on the front of the head for ease of use

A new larger table system with dual extensions for the largest woodworking table on the market. It also features twin T-slot grooves for a miter gauge or other homemade jigs

Newly designed table tilts 90° and has a positve stop at 0°

Large handle makes lowering and raising the table easy

Head mounted dual laser guide system provides a consistent drilling cross point on work piece

Feed handles can be mounted on either side of the drill press for convenient handle positioning

Extension wing provides additional support for longer workpieces

Variable speed system adjusts quickly and easily in one full range

Built-in dual LED work light

5/8" Keyless chuck

Quick setting depth stop

Adjustable split fence with dust collection port

Front mounted switch control, laser guide and LED work light

Front mounted digital LED display shows spindle speed

PM2800 VS DRILL PRESS

This new Woodworkers drill press was designed with the woodworker in mind.

It's design has many convenient features that other so called woodworking drill

pressses do not offer. The twin LED lights are designed to not cast shadows on

the workpiece like conventioal lights. The twin lasers help to pinpoint exactly on

the workpiece. The expandable work table is the largest in the industry in this

class. The single handle speed changer allows you to run the full range of speeds

without ever touching a belt and the front mounted digital readout displays the

exact speed the spindle is running. It also features a larger motor then any other

drill press in it's class to handle even the heaviest jobs during your project.

SPECIFICATIONS

Model Number PM2800

Stock Number 1792800

Swing (in) 18

Chuck Size (in.) 5/8, Keyless

Spindle Travel (in.) 4-3/8

Chuck Distance to Table (in.) 30

Chuck Distance to Base (in.) 46

Table Size (L x W/in.) 16 x 14

Table Size Fully Extended (L x W/in.) 16 x 26

Spindle Taper MT2 x JT33

Column Diameter (in.) 3-1/8

Spindle Speed Range (RPM) 400-3000

Base Size (in.) 11-7/8 x 19-5/8

Motor (TEFC) 1HP, 115/230V, Prewired 115V

Overall Dimension (H x W x D/in.) 68 x 23-1/2 x 31-1/2

Net Weight (lbs.) 287

Shipping Weight (lbs.) 302

OPTIONAL ACCESSORIES

Mortise Attachement 1792801

2-1/2" to 4" DC Adaptor JW1000

Drill Bit Sets Various

Drum Sanders Various

80 powermatic.com

A ❘ WORK SURFACE

Large cast iron table with dual extension wings shown with split fence

B ❘CONTROL PANEL

Front mounted switch controls with LED spindle speed readout, feed handle can be mounted on right or left side for users preference

C ❘WORKLIGHTS

Front mounted LED worklights

D ❘VARIABLE SPEED

Variable speed controls makes changing speeds quick and easy

E ❘DUAL LASER

Laser crosshairs pinpoint the project’s hole location

08DrillingMortising 10/24/06, 8:00 AM81

82 powermatic.com

FEATURES

In-line depth stop

Heavy-duty reversable handle

Stock hold-down with a double lock system

Quick action cam lock

Integrated bit and chisel spacers

Large work surfaces on both table and fence

Large, hinged chuck door with magnetic latch

Rack and pinion design

PM701 BENCHTOP MORTISER

The new POWERMATIC 701 Benchtop Mortiser features an in-line depth stop

which allows the user to stop at preset depths without racking the mortiser

bit to the base. Its heavy-duty reversible handle is so versatile that it can be

changed from one side to the other quickly and easily and requires no tools to

do so. The stock hold down features a specially designed double lock system.

One locks from the side, the other locks from the top, to completely eliminate

any slippage when removing the chisel from the work piece. This hold-down

is also reversible to allow stock from 0 to 5" thick to be captured underneath

it. The new POWERMATIC 701 Benchtop Mortiser has a quick-action cam lock

that will quickly lock the fence into position with one 90° movement. This lock

also features lock nuts, so once set; they will not have to be continually ad-

justed. Set-up has never been easier or more precise. The new POWERMATIC

701 Benchtop Mortiser features an integrated bit and chisel spacer system.

These two spacers are used to accurately and quickly account for the space

needed between the bit and chisel during set-up. Large work surfaces in the

table and fence allow for more stability and accurate cuts. The new mortiser

also includes a large hinged chuck door with magnetic catch. This unique ele-

ment allows the user to easily access the drill chuck with the standard 4" chuck

key to lock the bit in place. In addition, its rack and pinion allow for simple and

quick fence adjustments.

STANDARD EQUIPMENT

Chisel and tool holder with sharpening stone

1/2" drill chuck with 4" chuck key

Removeable safety switch key

Y E A R

WARR ANT Y

OPTIONAL ACCESSORIES

PM701S Stand 1791311

PM701-RB Riser Block Kit 1791312

1/4" Bit and Chisel 708590

5/16" Bit and Chisel 708591

3/8" Bit and Chisel 708592

1/2" Bit and Chisel 708593

3/4" Bit and Chisel 708594

5 Bit Set 708595

SPECIFICATIONS

Model Number PM701

Stock Number 1791310

Spindle Speed 1725

Chuck Capacity (in.) 1/2

Chisel Shank Capacity (in.) 3/4

Head Stroke (in.) 5-1/2

Chisel Center to Fence (in.) 4-3/8

Under Hold-Down (in.) 5

Fence Size (in.) 2-5/8 x 12-1/2

Base Size (in.) 16-5/16 x 13-3/4

Bushing Size (in.) 5/8 and 3/4

Motor (TEFC) 3/4HP, 1Ph, 115V

Net Weight (lbs.) 93

Shipping Weight (lbs.) 100

08DrillingMortising 10/24/06, 8:01 AM82

+ 5 hidden pages