Power Craft PAG-230/2100 User Manual & Warranty

User Guide & Warranty

2100W ANGLE GRINDER

After Sales Support

Now you have purchased a Power Craft
product you can rest assured in the
knowledge that as well as your 3 year
parts and labour warranty you have
the added peace of mind of dedicated
helplines and web support.

AFTER SALES SUPPORT

UK / N.IRELAND HELPLINE NO

0870 7323023

REP. IRELAND HELPLINE NO 1800 481005

WEB SUPPORT www.omegawolf.com/powercraft

MODEL NUMBER: PAG-230/2100

In order to deal with your enquiry as quickly and efficiently as possible, we ask you to send your

enquiry by email ([e-mail]). Do not forget to include your name, address and a

daytime telephone number.

Alternatively, you can contact our freephone service hot-line on the number given below.

Office hours are as follows:

Mon - Fri: 8 am - 6 pm, Sat: 10 am - 2 pm, Sun: 10 am - 4 pm

UK / NORTHERN IRELAND HELPLINE:

0870 7323023

REPUBLIC OF IRELAND HELPLINE:

1800 481005

WEB SUPPORT:

www.omegawolf.com/powercraft

Omega, Interex House, Prospect Close, Lowmoor Business Park

NG17 7LF Kirkby In Ashfield, England

Replacements or repairs under guarantee regulations are free of charge.

GB/IRE-0706-12

Name:

Address:

Contact Telephone No.:

E-mail:

Location of purchase:

Fault Description:

If you are requested by the manufacturer to return the item for
repair please complete the enclosed section and send it together

with your product and your receipt (proof of purchase) to the

service address shown below.

2100W ANGLE GRINDER

PAG-230/2100

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PAG-230/2100

19

Warranty

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PAG-230/2100

02

Contents

03 Introduction

04 Machine specifications

06 Safety instructions

- General Safety Instructions

- Additional safety instructions

11 Assembly

- Mounting a disc

- Mounting the protective guard

- Rotating the handgrip

- Mounting the side handle

- Mounting the flange

14 Operation

- Starting the machine

- Switching on and off

- Operation

16 Maintenance

18 Exploded view

19 Warranty

WARRANTY CERTIFICATE

Year of manufacture: 10/2007 ANGLE GRINDER PAG-230/2100

Congratulations! You have made an excellent choice with the purchase of this Quality
product. Our commitment to quality also includes our service. Should you, contrary to
expectations, experience defects due to material or manufacturing faults during private use
within 36 months of the date of purchase we shall be liable for warranty in accordance with
statutory warranty regulations, provided that: - The device was not put to any use other than the intended.­Was not overloaded. - Was not used with the wrong accessories. - Repairs where not carried out by any
other than the authorised workshop. The warranty certificate is only valid in connection with the receipt.
Please keep both in a safe place. The warranty does not affect your statutory rights.
The product is guaranteed for a period of three years beginning on the day of purchase. Keep your purchase
receipt safe as proof of the date of purchase. The guarantee period can only be extended for the duration of
any repair required.
During the warranty period, defective devices can be sent FREIGHT PREPAID to the service address stated at
the end of this booklet. We will, at our discretion either repair or exchange the device in accordance with
warranty legislation.

Please include the following when sending in your product for repair:

1. The receipt (proof of purchase)

2. This warranty certificate with your name, address, contact details and a fault description
completed overleaf.

If the original receipt is not enclosed the repair will be charged for in all cases. After the warranty has
expired you can still send defective devices for repairs FREIGHT PREPAID to the address at the end of this
booklet. Quotes as well as repairs after warranty period are to be paid for in all cases. Ensure the product is
sent well packed as no responsibility can be accepted for items lost or damaged in transit. This warranty
does not affect your statutory rights.

EC DECLARATION OF CONFORMITY

We Ferm B.V.

Lingenstraat 6, 8028 PM Zwolle, The Netherlands

declare that the design and construction of the following machine, in the form supplied by us, comply with
the requirements of the appropriate EC directives.
Product Description: 2100W ANGLE GRINDER
Model: PAG-230/2100
Appropriate EC directives: 98/37 EEC, 73/23 EEC, 89/336 EEC, 89/686/EEC
Applicable harmonised norms: EN 50144-1, EN 50144-2-3, EN55014-1, EN55014-2, EN 61000-3-2, EN 61000-3-3,

EN 166

J.A. Bakker - van Ingen J. Lodewijk
CEO Ferm B.V. Quality Manager Ferm Global 10/2007

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PAG-230/2100

03

Introduction

Congratulations on choosing to buy a
PowerCraft product.

By doing so you now have the assurance and peace of mind that comes with
purchasing a product made by one of Europe’s leading manufacturers.

All products brought to you by PowerCraft are manufactured to the highest
standards of performances and safety, and, as part of our philosophy for
customer service and satisfaction, are backed by our comprehensive
3 Year Warranty.

We hope you will enjoy using your purchase for many years to come.

2100W ANGLE GRINDER

Always read the instructions for electrical products carefully before
use. It will help you understand your product better and avoid
unnecessary risks. Keep this instructions manual in a safe place for
future use.

This Angle grinder is ideal for cutting, grinding and roughing metal and
stone.

Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web support: www.omegawolf.com/powercraft
Model Number: PAG-230/2100

18

Exploded view

Parts list

No. Description Position

406941 Flange outside 1
406940 Flange inside 3
407015 Wheel cover 4 till 6
406943 Spindle gear 18
406944 Pinion gear 28
407016 Rotor 32
407017 Stator 35
406947 Brush holder 42
406948 Carbon brush set (2 pcs) 43
406949 Brush cap 44
406950 Switch 51
406877 Side handle 60
406814 Cam wrench 61