Power Craft High-pressure cleaner Operating Instructions Manual
CAUTION: Do not use the appliance without having read the instructions for use
OPERATING INSTRUCTIONS
2
We are pleased that you have decided to purchase this high-pressure cleaner.
This high-pressure cleaner is ideally suited to the cleaning of vehicles, facades,
terraces, garden implements, tools. It is not constructed for industrial use.
Please read these operating instructions before putting
your unit into use for the first time and give particular
attention to the safety notes!
The warning and information signs affixed to the unit are important
indications for its use free from danger.
Apart from the notes provided in the operating instructions you
must also take into consideration legal regulations for safe practice and the prevention of accidents.
This symbol identifies all instructions which are
important for your safety . Always obey these
instructions otherwise injuries may result!
3
Unpack the cleaner
Packing list/Controls
1 High-pressure cleaner
A - Connection nipple for detergent suction
tube with filter
B - Unit switch (ON/OFF)
C - High-pressure outlet
D - Inlet water connection with filter
E - Mains cable
2 Handle
3 Screws (2x)
4 Detergent suction hose with
detergent filter and cover
5 Detergent tank
6 Quick-fitting coupling
7 Accessory compartment
8 Handgun
9 High-pressure hose
10 Spray lance with vario power nozzle
11 Spray lance with rotary nozzle
12 Rotary washing brush
13 Universal detergent (0.5 l concentrate)
Check the kit supplied!
If parts are missing or you ascertain any damage please contact us immediately by means of the
service telephone (at the latest 1 week after the date of purchase).
Please arrange for the proper disposal of the packaging
The packaging material can be recycled.
Please do not place the packaging into the ordinary refuse for disposal, but arrange for the
proper recycling.
4
Attaching the Transport Handle and Detergent Tank
A) Slide the transport handle on to the casing.
B) Fasten the transport handle using the two screws provided for the
purpose.
Insert the detergent suction hose with the filter on the connection
nipple.
Also fasten the detergent suction hose in the two guides of the trans-
port handle.
Insert the detergent suction hose with the filter in the detergent tank
and close it with a lid.
Electrical Connection
Never use defect connection or extension cables! If the connection cable is damaged, it must be replaced with a special
connection cable that is available from the manufacturer or his
customer service.
Please make sure that the connection or extension cables are
not damaged by being ran over, pulled or dragged. Protect the
connection cables from heat, oil, and sharp edges.
Never touch the mains plug and the socket with wet hands.
The connection between connection cable and extension cable
must not lie in the water.
All current-carrying components within the working area must be
jet-proof.
- The appliance may only be connected to an electrical connection
that was performed by an electrician according to IEC 60364.
- Only connect the appliance to alternating current. The voltage
must comply with the voltage specified on the rating plate.
- Minimum fuse protection of the socket 10 A (delay-action fuse).
- To avoid electric accidents, we recommend to use sockets with
a series connected residual current operated device (rated
breaking current max. 30 mA).
- Warning: Inappropriate extension cables may be dangerous. If
you work outside, only use extension lines that are approved and
specifically labelled and provide of a sufficient conductor cross
section:
1 to 10 m: 1.5 mm² 10 to 30 m: 2.5 mm²
- The plug and the coupling of an extension cable must be
waterproof.
- Always unwind the extension cable completely from the cable
drum.
Water connection
Please conform with the regulations of the water supply company.
The water supply may not exceed 10 litres/minute; the water may have a maximum temperature of
40 °C and a maximum pressure of 12 bar.
Note: The unit must be connected to the drinking water supply mains via a non-return valve.
Water hose (not in supply kit):
Use a fabric-reinforced hose with a commercially available quick-fitting coupling. The hose should
have an internal diameter of at least 1/2" 13 mm) and a length of at least 7,5 m.
Attention: Dirt in the water supply can damage the unit. We recommend the use of a water filter, 3/4" fitting, to avoid this.
5
Safety Instructions
The operation of the device in hazardous locations is not admissible.
Please comply with the corresponding safety instructions if you use the appliance in danger
areas (e.g. filling stations).
Do not turn on the appliance if the power supply cable or important components of the
appliance, such as safety components, high-pressure hoses, spray jet, are damaged.
Warning: High-pressure hoses, fittings, and couplings are of importance for the appliance
safety. Only use high-pressure hoses, fittings, and couplings recommended by the manufacturer.
The appliance must not be operated by children or non instructed persons.
The operator must use the appliance properly. He must take the local conditions into
consideration and must pay attention to third persons, in particular children, while working
with the appliance.
Warning: Do not use the appliance if third persons are within the reach of the appliance
unless such persons wear protective clothes.
Warning: High-pressure jets may be dangerous if they are used improperly.
The jet must not be directed at people, animals, active electrical equipment, or the appliance itself.
Never direct the jet at yourself or third persons to clean clothes or shoes.
Never use the appliance to spray objects containing hazardous substances (e.g. asbestos).
Warning: Vehicle tyres/tyre valves may be damaged and burst by the high-pressure jet. A
first sign is the discoloration of the tyre. Damaged vehicle tyres/tyre valves are hazardous.
Always perform the cleaning with a minimum distance of 30 cm.
Cleaning operations during which oil saturated waste water is generated, such as engine
cleaning and underbody cleaning, may only be performed in cleaning locations that are
equipped with an oil separator.
If you clean varnished surfaces, please respect a minimum distance of 30 cm to avoid
damages.
Never take in solvent-containing liquids or undiluted acids and solvents! These include, for
example, benzene, paint thinner, or heating oil. The spray is highly inflammable, explosive,
and toxic. Do not use acetone, undiluted acids, and solvents as they affect the materials
used on the appliance.
If required, wear appropriate protective clothes and glasses to protect yourself from return
spray.
Never leave the appliance unattended as long as it turned on.
Warning: This appliance has been developed for the use of detergents that are supplied or
recommended by the manufacturer. The use of other detergents or chemicals may affect
the safety of the appliance.
Safety Devices
Safety devices are intended to ensure the protection from injuries and must not be modified or
circumvented.
Unit switch
The switch prevents unintented starting of the appliance. Stop the appliance during breaks or after
operation.
Safety Button
The safety button located on the trigger gun ensures that the appliance is not switched on inadvertently.
Loading...