Power Craft PRS-600, 826630 User Manual
Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0308-11
UK Subject to change
UK
USERS MANUAL
Art.nr. 826630
PRS-600
Powercraft 11
EXPLODED VIEW
RECIPROCATING SAW
TECHNICAL SPECIFICATIONS
PRODUCT INFORMATION
Fig.A
1. Blade
2. Baseplate
3. Blade clamping screw
4. Switch
5. Speed control
6. Power cable
7. Adjusting screws baseplate length
8. Socket head wrench 4 mm (not shown)
PACKAGE CONTENTS
1 Reciprocating saw
2 Saw blades for wood (fine), length 200 mm
1 Saw blade for wood (coarse), length 200 mm
1 Saw blade for metal, length 200 mm
2 Hexagonal keys
1 Users manual
1 Warranty card
Check the machine, loose parts and accessories for
transport damage.
GENERAL SAFETY INSTRUCTIONS
Warning! When using electric tools, basic safety precautions should always be followed to reduce the
risk of fire, electric shock and personal injury, including the following. Read all these instructions before
attempting to operate this product.
Retain for future refence.
1. Keep work area clear.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose power tools to rain. Do not use
power tools in damp or wet locations. Keep work
area well lit. Do not use power tools in presence of
flammable liquids or gases.
3. Guard against electric shock.
Prevent body contact with grounded surfaces (e.g.
pipes, radiators, refrigerators).
4. Keep children away.
Children should be kept away from the work area at
all times. Do not let children handle the saw at any
time.
5. Store unused tools.
When not in use keep tools out of reach of children.
Store in a dry and secure location.
6. Do not force tool.
Do not apply undue pressure as this may affect performance and may cause damage to the machine.
Forcing the job also increases the potential for accidents.
7. Use right tool.
Do not force small tools or attachments to do the
job of heavy duty tool. Do not use a all purpose saw
for purposes not intended.
8. Dress properly.
Do not wear loose clothing or jewellery. They can be
caught in moving parts. Rubber gloves and nonskid
footwear are recommended when working outdoors. Wear protective hair covering to contain
long hair.
9. Use safety glasses.
Also use face or dust mask if cutting operation is
dusty.
10.Do not abuse cord.
Never carry tool by cord or yank it to disconnect it
from electrical socket. Keep cord from heat, oil and
sharp edges.
11.Secure work.
Use clamps or a vice to hold work. It’s safer than
using your hand and it frees both hands to operate
tool.
12.Do not overreach.
Keep proper footing and balance at all times.
13.Maintain tools with care.
Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and
changing accessories. Inspect tool cords periodically
and, if damaged, have repaired by authorized service
facility. Inspect extension cords periodically and
replace if damaged. Always use tool in conjunction
with a residual circuit breaker device. Keep handles
dry, clean and free from oil and grease.
14.Disconnect tools.
When not in use, before servicing, and when changing accessories such as blades, bits and cutters.
Voltage | 230 V~
Frequency | 50 Hz
Power consumption | 600 W
Number of revolutions, idle | 700 - 2300/min
Maximum saw thickness | 150 mm
Amount of travel | 26 mm
Weight | 3.5 kgs
LpA (sound pressure) | 90.4 dB(A)
LwA (sound capacity) | 103.4 dB(A)
Vibration value | 6.3 m/s
2
2 Powercraft
Loading...