Power Craft 14.4 Volt CORDLESS HAMMER DRILL User Manual & Warranty Information

14.4 VOLT

CORDLESS HAMMER DRILL

User Guide & Warranty

After Sales Support

Now you have purchased a Power Craft
product you can rest assured in the
knowledge that as well as your 3 year
parts and labour warranty you have
the added peace of mind of dedicated
helplines and web support.

AFTER SALES SUPPORT

UK HELP LINE: 0905-1460005

IRELAND HELP LINE: 1520-932626

WEB SUPPORT: www.heltec.eu

Name:

Address

Contact Telephone No.:

Fault Description:

Please complete this section before sending in your warranty certificate.

In order to deal with your enquiry as quickly and efficiently as possible, we ask you to send your

enquiry by email ([e-mail]). Do not forget to include your name, address and a

daytime telephone number.

Alternatively, you can contact our service hot-line on the number given below.

Office hours are as follows:

Mon - Fri: 8 am - 6 pm, Sat: 10 am - 2 pm, Sun: 10 am - 4 pm

UK Helpline

Heltec Ltd.

Circuit Tech Ltd.

Units 1/9 Stanley Mill • Kirkebrok Road • Deane, Bolton Lancs, England • BL3 4JE

Service Center

0905-1460005 - £ 0,06 / min.

Ireland Helpline

Heltec Ltd.

Circuit Tech Ltd.

Units 1/9 Stanley Mill • Kirkebrok Road • Deane, Bolton Lancs, England • BL3 4JE

Service Center

1520-932626 - E 0,15 / min.

WEB SUPPORT

www.heltec.eu

Replacements or repairs under guarantee regulations are free of charge.

GB-0803-14

14.4V CORDLESS HAMMER DRILL

PCC-1440

HELPLINE No. U K 0905-1460005 • IRELAND 1520-932626
WEB SUPPORT: www.heltec.eu

23

Warranty

HELPLINE No. U K 0905-1460005 • IRELAND 1520-932626
WEB SUPPORT: www.heltec.eu

02

Contents

03 Introduction

04 Machine data

05 Safety instructions

11 Mounting accessories

13 Operation

17 Charging the battery

19 Maintenance

21 Parts list

22 Exploded view

23 Warranty

WARRANTY CERTIFICATE

Year of manufacture: 03/2007 CORDLESS HAMMER DRILL PCC-1440

Congratulations! You have made an excellent choice with the purchase of this Quality
product. Our commitment to quality also includes our service. Should you, contrar

y to
expectations, experience defects due to material or manufacturing faults during private use
within 36 months of the date of purchase we shall be liable for warranty in accordance with
statutory warranty regulations, provided that: - The device was not put to any use other than the intended.­Was not overloaded. - Was not used with the wrong accessories. - Repairs where not carried out by any
other than the authorised workshop. The warranty certificate is only valid in connection with the receipt.
Please keep both in a safe place. The warranty does not affect your statutory rights.
The product is guaranteed for a period of three years beginning on the day of purchase. Keep your purchase
receipt safe as proof of the date of purchase. The guarantee period can only be extended for the duration of
any repair required.
During the warranty period, defective devices can be sent FREIGHT PREPAID to the service address stated at
the end of this booklet. W

e will, at our discretion either repair or exchange the device in accordance with

warranty legislation.

Please include the following when sending in your product for repair:

1. The receipt (proof of purchase)

2. This warranty certificate with your name, address, contact details and a fault description

completed overleaf.
If the original receipt is not enclosed the repair will be charged for in all cases. After the warranty has
expired you can still send defective devices for repairs FREIGHT PREPAID to the address at the end of this
booklet. Quotes as well as repairs after warranty period are to be paid for in all cases. Ensur

e the product is
sent well packed as no responsibility can be accepted for items lost or damaged in transit. This warranty
does not affect your statutory rights.

EC DECLARATION OF CONFORMITY

We Ferm B.V.

Lingenstraat 6, 8028 PM Zwolle, The Netherlands

declare that the design and construction of the following machine, in the form supplied by us, comply with
the requirements of the appropriate EC dir

ectives.
Product Description: CORDLESS HAMMER DRILL
Model: PCC-1440
Appropriate EC directives: 98/37/EC, 73/23/EEC, 89/336/EEC, 2002/95/EC, 2002/96/EC
Applicable harmonised norms: EN60745-1, EN60745-2-1, EN60335-1, EN60335-2-29, EN55014-1, EN55014-2,

Applicable harmonised norms: EN61000-3-2, EN61000-3-3.

J.A. Bakker - van Ingen J. Lodewijk
CEO Ferm B.V

. Quality Manager Ferm Global 03/2007

HELPLINE No. U K 0905-1460005 • IRELAND 1520-932626
WEB SUPPORT: www.heltec.eu

03

Introduction

Congratulations on choosing to buy a
Powercraft Product

By doing so you now have the assurance and peace of mind that comes with
purchasing a product made by one of Europe’s leading manufacturers.

All products brought to you by PowerCraft are manufactured to the highest
standards of performances and safety, and, as part of our philosophy for
customer service and satisfaction, are backed by our comprehensive
3 Year Warranty.

We hope you will enjoy using your purchase for many years to come.

CORDLESS HAMMER DRILL

For your own safety and that of others, we recommend that you
read this instruction manual carefully before using this machine.
Keep this instruction manual and the documentation provided
with the machine for future reference.

Contents of packing

1 Cordless hammer drill
1 Battery
1 Battery charger
2 Double-sided bits (Philips / slotted)
1 Users manual
1

After sales support card

1 Quick set-up guide

Check the appliance, any loose parts and accessories for damage caused
during transport.

HELPLINE No. U K 0905-1460005 • IRELAND 1520-932626
WEB SUPPORT: www.heltec.eu

22

Exploded view

HELPLINE No. U K 0905-1460005 • IRELAND 1520-932626
WEB SUPPORT: www.heltec.eu

21

Parts list

HELPLINE No. U K 0905-1460005 • IRELAND 1520-932626
WEB SUPPORT: www.heltec.eu

04

Machine information

Technical specifications

Product information

Fig. A

1. Drill chuck

2.

Hammer action adjustment

3. Torque adjustment ring

4. Speed selection switch

5. Direction switch

6. On/Off switch

7. Battery

4

5
6

7

1

7

2

3

Voltage 14.4 V

—

--­Charger voltage 230 V
Charger frequency 50 Hz
Battery output 1.5 Ah
Charging time 1 - 2 hour
Drill speeds 2
Max. torque (low speed) 15 Nm
No-load speed 0 - 400/0 - 1150/min
Impact rate 0 - 6400/0 - 18400/min
Chuck capacity 0.8 - 10 mm
Weight (incl. battery) 1.84 kg
Lpa (sound pressure) 91 dB(A)
Vibration 3.39 m/s

2

Position Description Specification

1 Bolt left for chuck 502060
2 Chuck 502061
39 Left/right switch 406656
42 Switch 406654
43 Battery CDA6031

- Charger CDA6017