Powercom 1200VA, 1000VA, 2200VA, 1500VA User Manual

U P S

Uninterruptible Power System

Line Interactive Network UPS

800VA/1000VA

1200VA/1500VA/2200VA

USER‘S MANUAL

Printed in USA

ABC

Important safety instructions

Thank you for selecting this uninterruptible power system (UPS). It provides
you with better protection for connected equipment.

Please read this manual!

This manual provides safety, installation and operating instructions that will
help you derive the fullest performance and service life that the UPS has to
offer.

Please save this manual!

It includes important instructions for the safe use of this UPS and for
obtaining factory service should the proper operation of the UPS come into
question.

Please save or recycle the packaging materials!

The UPS‘s shipping materials were designing with great care to provide
protection from transportation related damage. These materials are
invaluable if you ever have to return the UPS for service. Damage sustained
during transit is not covered under the warranty.

Table of contents

1
2
3
4
5
6
7
8
9

10
11

12
13
14

Introduction… … … … … … … … … … … … … 1
Safety… … … … … … … … … … … … … … … ..2
Presentation… … … … … … … … … … … … 3
Front Panel… … … … … … … … … … … … ..3
Rear Panel … … … … … … … … … … … … … 4
Installation… … … … … … … … … … … … … 5
Operation… … … … … … … … … … … … … .7
Alarms… … … … … … … … … … … … … … ..8
Software Options… … … … … … … … … … 9
Computer Interface Port………………10

Battery replacement…………………….11
Troubleshooting…… …… ……… ……… .12
Storage… … … … … … … … … … … … … … .12
Specifications… … … … …… … … … … … .13

1. INTRODUCTION

The product is line interactive UPS with the newest technology and powerful
function. The LINE INTERACTIVE UPS is with AVR function allows input
voltage range from 75% to 125%, including on line voltage boost-up & buck
down. An ideal protection equipment for critical connected loads. It is based
on microprocessor controls, with utility power connected, the charging is
ongoing, no need to switch ON the UPS and at back-up mode, UPS can be
automatically turned OFF if none of the connected loads is operating to save
the battery energy. The indicator will be ON when battery needs replacement
and a cyclic self-testing function is included in order to verify both the
operation of the UPS and the condition of the battery.

In addition, This UPS provides advanced single telephone line or modem
surge suppression through the modular connectors on the back panel.

The LINE INTERACTIVE UPS and RUPS seies monitoring software (optional
kits) makes your computer operate intelligent and provides you with the
ability of perfect protection of your critical devices.

Note: There is no guarantee that interference to radio/TV will not occur
in a particular installation. If this UPS causes interference to radio or
television reception, which can be determined by turning the UPS off
and on, the user is encouraged to try to correct the interference by one
or more of following measures:

l

connect the equipment to an outlet on a circuit different from that to

which the receiver is connected

l

increase the separation between the equipment and the receiver

l

reorient the receiving antenna

1

2. Safety

CAUTION !

• To reduce the risk of electric shock, disconnect the UPS from the mains supply
before installing a computer interface signal cable. Reconnect the power cord only
after signaling interconnections have been made.

• The internal energy source(the battery) cannot be de-energized by the user. The
output may be energized when the unit is not connected to a mains supply.

• The right way to de-energize the UPS properly in an emergency is to move the I/O
switch to the OFF position and disconnect the power cord from the mains supply.

• The socket-outlet shall be installed near the equipment and easily accessible.

• Attention, hazardous through electric shock. Also with disconnection of this unit the

main, hazardous voltage still may be accessible through supply from battery. The
battery supply should be therefore disconnected in the plus and minus pole when
maintenance of service work inside the UPS is considered.

• Do not dispose of batteries in a fire, the battery may explore.

• Do not open or mutilate the battery, released electrolyte is harmful to the skin and

eyes.

• A battery can present a risk of electric shock and high short circuit current. The
following precaution should be observed when working on batteries

- Remove watches, rings or other metal objects.

- Use tools with insulated handles.

Caution: Risk of electric shock - hazardous live parts inside this unit are
energized from the battery supply even when the input AC power is connected.

Caution: Risk of electric shock, do not remove cover. No user serviceable parts
inside, Refer servicing to qualified service personnel.

Warning: To reduce the risk of fire, replace only with the same type and rating
of fuse.

Warning: To reduce the risk of fire or electric shock, install in temperature and
humidity controlled indoor area of conductive contaminants.

2

3. Presentation

3.6

FRONT PANEL

3.1 "REPLACE BATTERY" indicator (RED LED)

The LED illuminates when the UPS's battery is no longer useful and must be replaced.

3.2 "BUCK AVR (VOLTAGE REDUCTION)" indicator (YELLOW LED)

The LED illuminates when the UPS is correcting a high utility voltage condition. The
loads receive normal power.

3.3 "BACK UP" indicator (YELLOW LED)

The LED illuminates when the UPS is supplying battery power to the loads.

3.4 "BOOST AVR (VOLTAGE BOOST)" indicator (YELLOW LED)

The LED illuminates when the UPS is correcting a low utility voltage condition.
The loads receive normal power.

3.5 "LINE NORMAL" indicator (GREEN LED)

3.6 "ON/OFF/TEST/SILENCE" button

Press the button more than 2 seconds to turn the UPS on or off, press the button
less than 1 second to activate the UPS's self-testing or silence the back up alarm.

3.1

3.2

3.3

3.4

3.5

800VA/1000VA/1200VA/1500VA/2200VA

3