Power Acoustik PTID-3200, PTID-3200T Owner's Manual

PTID-3200/ PTID-3200T

In-Dash 3.2” Monitor
Touch Sensor
DVD/MP4/CD
MW/FM Radio
Built-in NTSC tuner

Owner’s Manual

Take the time to read through this owner’s manual.
Familiarity with installation and operation procedures will help you obtain the best
Performance from your new DVD-receiver.

Page - 1

Table of Contents

Table of Contents.......................................................................................................................1

Important Safeguards.................................................................................................................2

Accessories .......................................................................................................................3

Installation/Un-Installation ..............................................................................................................4

Wiring Connections............................................. ..................................................................................5

Detachable Control Panel ........................................................................................................6

Panel Controls……………..........................................................................................................6

IR Remote Controls ........................................................................................................................8

General Operations....................................................................................................................9

Digital Tuner................................................................................. .............. ........ ......... .............11

Memory Card/ USB Operations.......................................................................................................... 12

Disc operations..................................................................................................................................14

MP3 overview...............................................................................................................................17

TV Operations....................................................................................................................................18

Compatible Files ................................................................................................................................ 19

SETUP Menu ..............................................................................................................19

Other Functions..................................................................................................................................21

Anti-theft system................................................................................................................................21

Note on Discs.....................................................................................................................................22

Troubleshooting Guide ..............................................................................................................23

Specification............................ ............ ........... ............ ........... ........... ............ ........... .................24

Page -2

Important Safeguards

z Using the device at temperature below -10℃ may cause the breakage of the device. BEFORE

USING PLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDED
TEMPERATURE!

z Read carefully through this manual to familiarize yourself with this high-quality sound system.
z Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.
z When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a

higher amperage rating may cause serious damage to the unit.

z DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to

the eyes.

z Make sure that pins or other foreign objects do not get inside the unit; they may cause

malfunctions, or create safety hazards such as electrical shock or laser beam exposure.

z If you have parked the car for a long time in hot or cold weather, wait until the temperature in the

car becomes normal before operating the unit.

z DO NOT open covers and do not repair yourself. Consult the dealer or an experienced technician

for help.

z Make sure you disconnect the power supply and aerial if you will not use the system for a long

period or during a thunderstorm.

z Make sure you disconnect the power supply if the system appears to be working incorrectly,（e. g,

making unusual sounds, smelling strange, emitting smokes from inside or liquid having gotten
inside it） Have a qualified technician check the system.

z The unit is designed for negative terminal of the battery, which is connected to the vehicle metal.

Please confirm it before installation.

z Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it

may overload or burn out the power amplifier.

z Do not install the detachable panel before connecting the wire.
z Don't remove the detachable panel when encoding.

Page - 3

Accessories

Package contains the following accessories for installation and operation of the unit.

(1) Washer, Spring

Washer, M5 Nut

1 each
(2) Mounting Strap 1
(3) Screw 1

(4) Bolt 4

(5) Mounting Collar 1

(6) Release Key 2

(7) Rubber Cushion 1

AV in Cable Panel Carrying Case

Owner’s Manual Remote Controller

Page -4

Installation/Un-Installation

First complete the electrical
connections, and then check
them for correctness.

Installation

This unit can be installed in any
dashboard having an opening
as shown on the picture. The
dashboard should be 4.75 –

5.56 mm thick in order to be
able to support the unit.

1. Insert mounting collar into the dashboard, and bend the mounting tabs out with a screwdriver.
Make sure that lock lever（

※）is flush with the mounting collar (not projecting outward).

2. Secure the rear of the unit.
After fixing mounting bolt and power connector, fix the rear of the unit to the car body by rubber
cushion.

3. Insert trim plate.
When you prepare to insert trim plate, please check its direction. Once it was up side down, it cannot
be fixed.

Un-installation

Remove Trim Ring and insert Release Keys into left and right side-end holes as shown in below
picture and pull the unit out of the dashboard.

Lock lever（※）

Page - 5

Wiring Connections

Make sure you have good chassis ground. A good ground connection will eliminate most electrical
noise problems. A good chassis ground requires a tight connection to the vehicle’s metal chassis.
The area around the ground connection should be clean, bare metal without rust, paint, plastic, dust,
or dirt for a good electrical connection.

**TV Antenna is for PTID-3200T only.
Caution: Do not interchange the

connection of the wiring!!!
For some car models you may need
to modify wiring of the supplied
power cord. Contact your authorized
car dealer before installing this unit.

Using the ISO Connector

1. If your car is equipped with the
ISO connector, then connect the
ISO connectors as illustrated.

2. For connections without the ISO
connectors, check the wiring in the
vehicle carefully before connecting,
incorrect connection may cause
serious damage to this unit.

3. Cut the connector, connect the
colored leads of the power cord to
the car battery as shown in the color code table below for speaker and power cable connections.

Location Function
Connector A Connector B

1 Rear Right(+)---Purple
2 Rear Right(-)---Purple/Black Stripe
3 Front Right(+)---Grey
4 Battery 12V (+)/yellow Front Right(-)---Grey/Black Stripe
5 Auto Antenna/blue Front Left(+)---White
6 Front Left((-)---White/Black Stripe
7 ACC+/red Rear Left(+)---Green
8 Ground/black Rear Left(-)---Green/Black Stripe

Page -6

Detachable Control Panel

Detaching the control panel

z Turn the Power off.
z Press OPEN button release the panel.
z Pull the panel out.

Attaching the control panel

z Insert the left side of the control panel into the main unit.
z Press the control panel right side until the “click” sound is heard.

Caution:

DO NOT insert the control panel from the right side. It can damage the control panel.
The control panel can easily be damaged by shocks. After removing it, place it in a protective case

and be careful not to drop it or subject it to strong shocks.
The rear connector that connects the main unit and the control panel is an extremely important part.

Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.

Note:

If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in
isopropyl alcohol to clean the socket on the back of the control panel.

Panel Controls

Front panel

Page - 7

Inner Panel

17. Memory Card slot

18. Flash LED

19. RESET

1. POWER/ MUTE

2. MODE

3. MENU

4. AS/PS

5. Volume Up (+)

6. NEXT

7. IR sensor

8. PREVIOUS

9. LCD

10. AV in jack

11. MEM/

12. OK

13. OPEN

14. USB jack

15. BAND

16. Volume Down (-)

20. Eject button

21. Disc slot