Power Acoustik Mofo 12, Mofo 15 Specifications
WWW.POWERACOUSTIK.COM
When technology advances, products do as well. Does Lamborghini need to refine their cars every 2 years?
NO, they do because they can. After 6 years, it is time for a change. Say “See Ya!” to the old MOFO, and welcome the new MOFO-X subwoofers! The new motor is refined and increases efficiency dramatically! MOFO-X subs
use a non-pressed pulp cone for durability and smooth low bass. Like the original MOFOs, the new models use an
aluminum dustcap that couples to the voice coil former and extends over the cone. Why? The fins brace the cone
and eliminate cone flex during high excursion. Since the cap is aluminum and coupled to the coil former, it acts as
a heat sink or heat extractor. Using the latest materials, the new MOFO-X subs yield superior performance!
Dual Poly-Cotton Spiders
Die-Cast Aluminum Frame
Vented Pole Piece
vent/port and subwoofer displacements.
F3 (Hz)
Cubic
Feet
Port Diameter
Tuning
(Hz)
F3 (Hz)
Cubic
Feet
Port Diameter
Tuning
(Hz)
Royal Blue Finish w/ Diamond Cut Accents
Die Cast Aluminum Voice Coil Heatsink
Non-Pressed Pulp Cone
Polyether Foam Surround
2.5” 4-Layer Voice Coil on Aluminum Former
Driver Specifications
Series Wired 122X 152X
FS (Hz)
QMS
VAS (ft
X-MAX (mm)
X-MECH (mm)
QES
RE (Ω)
BL (Tesla)
RMS Power
MAX Power
QTS
SPL (1w/1m dB)
Voice Coil
Overall Diameter
Overall Height
Mounting Depth
Cutout Diameter
Motor Diameter
Motor Height
Flange Width
Flange Height
Weight
3
)
28.9 24.1
5.559 6.103
1.367 3.761
15 15
23 23
0.429 0.480
3.922 3.95
20.28 21
1,500 1,700
2,700 3,000
0.399 0.445
85.4 86.9
DVC 2Ω DVC 2Ω
12.625" 15.5"
7.875" 9.25"
6.875" 8.125"
11.25" 14.125"
7.875" 7.875"
3" 3"
.75" .75"
.625" .625"
26lbs. 30lbs.
124X
30.3
6.11
1.353
15
23
0.47
7.22
25.7
1,500
2,700
.44
85.4
DVC 4Ω
12.625"
7.875"
6.875"
11.25"
7.875"
3"
.75"
.625"
26lbs.
MOFO-X Features
Nickel Plated 8ga Compression Wire Terminals
170oz Strontium Ferrite Magnet
Enclosure Recommendations
154X
24.4
5.95
4.077
15
23
0.51
7.23
26.3
1,700
3,000
0.47
87
DVC 4Ω
15.5"
9.25"
8.125"
14.125"
7.875"
3"
.75"
.625"
30lbs.
All enclosures should be made of .75” (3/4”) material only.
When possible, make the baffle 1.5” (1 1/2”) thick and
add .75” (3/4”) to the depth of the enclosure to compensate.
All volumes INCLUDE
DO NOT
change the volume unless you plan on adding a substantial amount of bracing. For added performance, applying
a coat of fiberglass resin to the interior walls will greatly
improve sealing the enclosure. Adding a thin layer of poly-fill
will improve response by smoothing out enclosure reflections.
MOFO-12 Sealed MOFO-12 Ported
Cubic
Feet
1.00 54.0 2.00 4" x 12" 36.8
MOFO-15 Sealed MOFO-15 Ported
Cubic
Feet
2.00 40 4.00 (2) 4" x 11.75" 35.6
Turn over for woofer wiring diagrams...
A
M
P
A
M
P
1 MOFO DVC2 Wired to 4Ω
1 MOFO DVC4 Wired to 8Ω
A
M
P
A
M
P
1 MOFO DVC2 Wired to 1Ω
1 MOFO DVC4 Wired to 2Ω
2 MOFO DVC2 Wired to 2Ω
2 MOFO DVC4 Wired to 4Ω
A
M
P
POWER ACOUSTIK AUDIO ACCESSORIES
2 MOFO DVC2 Wired to .5Ω
2 MOFO DVC4 Wired to 1Ω
3 MOFO DVC2 Wired to 1.33Ω
3 MOFO DVC4 Wired to 2.67Ω
CAR AUDIO ACCESSORIES