Power Acoustik MID-65 User Manual

Keep in a safe and dry place for future reference.

Model Number of your woofer

Serial Number

Place of purchase

Notes

MID-65

Your enclosure data Sealed Vented Bandpass Other

Total airspace

Enclosure Dimensions

Port type, area and length (if available)

Drawing pad

(circle one)

MID-BASS OWNERS MANUAL

Power Acoustik

1550 S. Maple Ave.

Montebello, CA 90640 USA

PH: 323.722.3333 FX: 323.722.1122

www.poweracoustik.com

Congratulations and thank you for purchasing Power Acoustik products. We are confident you will enjoy your new mid-bass driver. It is designed for high output system with maximum efficiency.

We advise you to keep this manual in a safe and dry place. Write down any important information to reference from in the future, such as you enclosure information and port dimensions. Draw a simple diagram or parameters of the enclosure incase you ever need to reference from it in the future.

Enclosure Recommendations for MID-65

Specifications

Model

Mounting Depth

Outer Diameter

Cutout Diameter

Driver Displacement

Impedance

RMS Power

MAX Power

PEAK Power

Voice Coil

Magnet Weight

Frequency Response

Resonant Frequency

Qts

Qms

Qes

Vas

XMAX

SPL

MID-65

2.875”

6.625”

5.8”

.02 cu.ft.

8 ohm

100 watts

200 watts

300 watts

1.25”

20 oz

150 - 15KHz

110.994Hz

.640

3.2

.801

6.934

2mm

92.6dB

NOTICE

Due to the nature of this speaker, it works best when installed in smaller sealed enclosures. The use of a ported enclosure is not recommended.

Optimum Enclosure

NET Volume .4 cuft / 11.3 ltrs

Enclosure Q .808

Max Power 125 watts

SPL 91dB

Fill 60% Loose

Wiring Configurations

This mid-bass driver is only available in a single 8 ohm voice coil configuration, there are no wiring diagrams to explain for other possible impedance levels. However, you can obtain different impedance levels with multiple speakers connected to one circuit, but because of the intended application of the speaker the information is not disclosed. If you will be designing a system which requires more than one driver in one a circuit and need assistance calculating the impedance, please E-mail tech-support@poweracoustik.com for more information or call our offices at 323.722.3333.