Poulan PPB3000B Owner’s Manual

Poulan PRO

Por favor, no devuelva el aparato al lugar de compra.

Please do not return unit to retailer.
Veuillez ne pas retourner routil au detaillant.

• 1-800-554-6723

www.poulan-pro.com

Instruction Manual

Manual de Instrucciones

Manuel d'lnstructions

PPB3000B /

WARNING:

Read and follow all Safety Rules and Operating Instructions before

using this product. Failure to do so can result in serious injury. Refer
to your powerhead manual for additional Warnings and Operating

Instructions.

ADVERTENOIA:

Lea el manual de instrucciones y siga todas las advertencias e

instrucciones de seguridad. El no hacerlo puede resultar en le-
siones graves. Refiera a su manual del cabeza de motor para las

Instrucciones de Funcioniamiento y las Advertencias adicionales.

AVERTISSEMENT:

Lire le manuel d'instructions et bien respecter tousles avertisse-

ments et toutes les instructions de securite. Tout defaut de le
faire pourrait entraTner des blessures graves. Referez-vous &
votre manuel de bloc-moteur pour des Avertissements et des

Instructions d'Utilisation additionnels.

Poulan PRO
1030 Stevens Creek Road

Augusta, GA 30907

545133460 9/18/06

IMPORTANT WARNINGS AND

SAFETY INSTRUCTIONS

AWARNING:

When using electric gardening appliances, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and serious h_jury. The warnings and safety instructions in

this manual must be followed to reduce the risk of fire, electric shock, or injury, and to provide
reasonable safety and efficiency in using this unit. The operator is responsible for following the

warnings and instructions in this manual and on the unit. Read the entire instruction manual be-
fore assembling and using the unit! Restrict the use of this unit to persons who read, understand,

and follow the warnh_gs and instructions in this manua_ and on the unit. Never allow children to
use this unit. Do not allow the unit to be used as a toy. Close attention is necessary when used
near children. Always disconnect unit from power source when making repairs, adjustments, and

when changing accessories and attachments. Nonconforming replacement components or the
removal of safety devices may cause damage to the unit and possible injury to the operator or

bystanders. Use only accessories and replacement parts as recommended. Use only for jobs
explained in this manual

KNOW YOUR UNIT

• Read your instruction manual carefully until
you completely understand and can follow

all warnings and safety rules before operat-
ing this attachment.

• Restrict use of this attachment to users who
understand and will follow aH warnings and

safety rules in this manual.

PLAN AHEAD

A WARNING: Inspect area before use.

Remove all debris and hard objects such as
rocks, glass, wire, etc. that can ricochet, be

thrown, or otherwise cause injury or damage
during operation.

• Always wear eye protection when operat-
ing, servicing, or performing maintenance
on this attachment. Wearing eye protection

will help to prevent rocks or debris from be-
ing blown or ricocheting into eyes and face
which can result in blindness and/or seri-

ous injury. Eye protection should be
marked Z87.

• Always wear foot protection. Do not go
barefoot or wear sandals.

• Always wear respirator or face mask when
working with unit in dusty environments.

• Secure hair above shoutder length. Secure
or remove jewelry, loose ctothing, or cloth-

ing with loosely hanging straps, ties, tas-
sels, etc. They can be caught in moving

parts.

• Do not operate unit when you are tired, ill,
upset, or if you are under the influence of al-

cohol, drugs, or medication.

• Keep children, bystanders, and animals
away from work area a minimum of 30 feet
(10 meters) when starting or operating unit.

Do not point blower discharge opening in
the direction of people or pets.

FUEL SAFETY (for gas powerheads)

• Eliminate all sources of sparks or flame (in-
cluding smoking, open flames, or work that
can cause sparks) in the areas where fuel is

mixed, poured, or stored.

• Mix and pour fuel in an outdoor area; store
fuel in a cool, dry, well ventilated place; use

an approved, marked container for all fuel
purposes.

• Do not smoke while handling fuel or while
operating the unit.

• Make sure the attachment is properly as-
sembled and in good operating condition.

• Do not fill fuel tank while engine is running.

• Avoid spilling fuel or oil. Wipe up fuel spills
before starting engine.

• Move at least 10 feet (3 meters) away from
fuel and fueling site before starting engine.

• Always store gasoline in a container ap-
proved for flammable liquids.

ELECTRICAL SAFETY (for electric
powerheads)

AWARNING:

Avoid a dangerous environment. To reduce the

risk of electrical shock, do not use in rain, in

damp or wet locations, or around swimming

pools, hot tubs, etc. Do not expose to snow,
rain, or water to avoid the possibility of electrical

shock. Do not use on wet surfaces. Do not han-
dle extension cord plug or unit with wet hands.
Avoid dangerous situations. Do not use in the

presence of flammable liquids or gases to avoid

creating a tire or explosion and/or causing dam-
age to unit. Do not abuse cord. Never carry the

unit by the extension cord or yank extension

cord to disconnect unit. To unplug, grasp the

plug, not the cord. Do not use cord as a handle,

close a door on cord, or pull cord around sharp
edges or corners. Turn off all controls before un-

plugging. Do not expose cords to heat, oil, or

water. Do not use with damaged cord or plug. If

unit is not working as it should, has been

dropped, damaged, left outdoors, or dropped

into water, return it to your authorized service

dealer for repair. Unplug the unit from the power
source when not in use, before servicing, and
when changing accessories and/or attach-

ments. Do not put any object into openings. Do

-2-

not use with any opening blocked; keep free of
dust, lint,hair and anything that may reduce air
flow.

• Use only a voltage supply as shown on the
nameplate of the powerhead.

• Avoid dangerous environments. Do not use
in unventilated areas or where dust or explo-

sive vapors can build up,

• To reduce the risk of electric shock, the
powerhead may have a polarized plug (one
blade is wider than the other); if so, it will re-

quire the use of a polarized extension cord.
The appliance plug will fit into a polarized

extension cord only one way. If the plug
does notfit fully into the extension cord, re-

verse the plug. If the plug still does not fit,
obtain a correct polarized extension cord,
A polarized extension cord will require the

use of a polarized wall outlet, This plug will
fit into the polarized wail outlet only one

way. If plug does not fit fully into the wail
outlet, reverse the plug, If it still does not fit,

contact a qualified etectrician to instalt the
proper wall outlet, Do not change the equip-
ment plug, extension cord receptacle, or

extension cord plug in any way.

• To reduce risk of electrical shock, use ex-
tension cords specifically marked as suit-
able for outdoor appliances having etectri-

cat rating not less than the rating of unit.
Cord must be marked with suffix "W-A" (in
Canada "W"), Make sure your extension

cord is in good condition, Inspect extension
cord before use and replace if damaged. Do

not use a damaged cord, Cord insulation
must be intact with no cracks or deteriora-

tion, Plug connectors must beundamaged.
The extension cord used to reach the pow-

er source must be heavy enough to carry
current from the power source the full length

of the extension cord to the unit. An under-
sized extension cord wilt cause a drop in
line voltage resulting in loss of power and
overheating, If in doubt, use the next heavi-

er gauge. The lower the gauge number, the
heavier the cord,

• Do not use muttipte cords.

• Keep the extension cord clear ofoperator and
obstacles at atl times,

• Tie cord to cord retainer and connect to re-
cessed plug as shown in this manuat to pre-
vent damage to unit and/or extension cord

and to reduce the possibility of the exten-
sion cord disconnecting from the unit during
operation,

• Do not attempt to repair unit, inspect the insu-
lation and connectors on the powerhead and

extension cord before each use. If there is
any damage, do not use until damage is re-

paired by your authorized service dealer,

• Do not use the powerhead if the switch
does not turn the unit on and off properly,

Have the unit repaired by your authorized
service dealer,

• Avoid unintentional starting ofthe unit. Nev-
er carry unit with your finger on the switch.

Be sure the switch is in the OFF position
and never touch the switch when connect-

ing extension cord.

• Avoid any body contact with any grounded
conductor, such as metal fences, or pipes, to

avoid the possibility of electric shock.

• Ground Fault Circuit Interrupter (GFCI)
protection should be provided on the circuit

or outlet to be used for the powerhead, Re-
ceptacles are available having built-in

GFCI protection and may be used for this
measure of safety,

• Stop the motor immediately if you are ap-
proached.

BLOWER SAFETY

WARNING: Never put hands or other

objects into blower housing to avoid serious
injury from the rotating impeller.

_qkWARNING: inspect the area before

using the unit. Remove all debris and hard ob-
jects such as rocks, glass, wire, etc., that can

ricochet, be thrown, or otherwise cause injury
or damage during operation.

• inspect attachment before each use for
worn, loose, missing, or damaged parts. Do

not use until unit is in proper working order.

• Keep outside surfaces free from oil and
fuel.

• Never start or run engine inside a closed
room, building or other unventilated area.

Breathing exhaust fumes can kill.

• Avoid dangerous environments. Do notuse
in unventilated areas or where explosive

vapors or carbon monoxide build-up could
be present.

• Do not set unit on any surface except a
clean, hard area while engine is running.

Debris such as gravel, sand, dust, grass,
etc. could be picked up by the air intake and

thrown out through discharge opening,
damaging unit, property, or causing serious
injury to bystanders or operator.

• Do not overreach or use from unstable sur-
faces such as ladders, trees, steep slopes,

rooftops, etc. Keep firm footing and balance
at all times.

• Never place objects inside the discharge
opening; always direct the blowing debris

away from people, animals, glass, and soiid
objects such as trees, automobiles, walls,
etc. The force of air can cause rocks, dirt, or

sticks to be thrown or to ricochet which can
hurt people or animals, break glass, or
cause other damage.

• Check air intake opening frequently. Keep
vents and discharge opening free of debris
which can accumulate and restrict proper

air flow.

• Never place any object in air intake opening
as this could restrict proper air flow and cause

damage to the unit.

• Never use for spreading chemicals, fertiliz-
ers, or other substances which may contain

toxic materials.

• To avoid spreading fire, do not use near leaf
or brush fires, fireplaces, barbecue pits,

ashtrays, etc.

• Wear hearing protection.

• Use only in daylight or good artificial light.

-3-

MAINTAIN YOUR UNIT PROPERLY

WARNING: Disconnect powerhead

spark plug (or disconnect powerhead from
power source) before performh_g mah_te-
nanse.

• Have all maintenance other than the rec-
ommended procedures described in the in-
struction manual performed by your autho-

rized service deaIer.

• Always see your authorized service dealer to
replace a damaged impeller. Parts that are
chipped, cracked, broken, or damaged in

any other way can fly apart and cause seri-
ous injury. Have damaged parts replaced

before using attachment.

• Use only recommended Poulan PRO re-
placement parts; use of any other parts

may void your warranty and cause damage
to your unit.

• Never douse or squirt the attachment with
water or any other liquid.

TRANSPORTING AND STORAGE

• Hand carry the unit with the engine
stopped.

• Allow the powerhead and attachment to
coo_ and secure the unit before storing or

transporting in a vehicle.

• Store unit and fuel in areawhere fuel vapors
cannot reach sparks or open flames from

water heaters, electric motors or switches,
furnaces, etc.

• Store in a high, cool, dry, indoor area out of
reach of children,

if situations occur which are not covered in this
manual, use care and good judgment. If you

need assistance, calt 1-800-554-6723.

SPECIAL NOTICE: Exposure to vibratioes
through prolonged use of gasoline powered

hand tools could cause blood vessel or nerve

damage in the fingers, hands, and joints of peo-

ple prone to circulation disorders or abnormal

swelling. Prolonged use in cold weather has

been linked to blood vessel damage in other-

wise healthy people. If symptoms occur such as

numbness, pain, loss of strength, change in skin

color or texture, or loss of feeling in the fingers,

hands, or joints, discontinue the use of this tool

and seek medical attention. An anti-vibration
system does not guarantee the avoidance of

these problems. Users who operate power tooIs
on a continual and regular basis must monitor
closely their physical condition and the condition

of this tool.

SAVE THESE INSTRUCTIONS

KNOW YOUR BLOWER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR

BLOWER ATI-ACHMENT. Compare the illustrations with your unit to familiarize yourself with the

location of the various controls and adjustments. Save this manual for future reference.

Air intake Opening

Blower Discharge

Opening

-4-

OPERATING THE COUPLER
Your powerhead is equipped with a coupler

which enables optional attachments to be
installed. The optional attachments are:

Edger ..................... PPB1000E

Cultivator .................. PPB2000T

Pruner .................... PPB5000P

Brushcutter _ ............... PPB4000C

*not designed for use with electric powerheads

MODEL:

_l_ WARNING: Always disconnect pow-

erhead spark plug (or disconnect powerhead
from power source) before removing or instal-

ling attachments.

REMOVING ATTACHMENT

CAUTION: When removing or installing at-

tachments, place the unit on a fiat surface for
stability.

1. Loosen the coupler by turning the knob
counterclockwise.

Coupler

Lower \ .OOSEN
Attachment

TIGHTEN Knob

2. Press and hold the locking/release button.

Locking/Release
Button ",.-__

Upper Shaft

Jill,

ill

m_WARNING: Make sure the locking/

release button is locked in the primary hole

and the knob is securely tightened before op-
erating the unit. Using the wrong hole could

lead to serious injury or damage to the unit.

Secondary Hole

Locking/Release
Button in Primary Hole

INSTALLING ATTACHMENT
HANGER

An attachment hanger is provided for storage
when attachment is not in use. To install hang-

er on attachment:

1. Remove the shaft cap from the attach-
ment (if present) and discard.

2. Press and hold the locking/release but-
ton.

3. Push hanger onto the attachment until
the locking/release button snaps into the

hole.

OPERATING POSITION

ALWAYS WEAR:

Eye Protection

/ _ Upper Shaft

Lower Attachment

3. While securely holding the upper shaft,
pull the attachment straight out of the

coupler.

INSTALLING ATTACHMENT

1. Remove the shaft cap from the attach-
ment (if present) and discard.

2. Position locking/release button of attach-
ment into guide recess of upper shaft

coupler.

3. Push the attachment into the coupler until

the locking/release button snaps into the

primary hole.

4. Before using the unit. tighten the knob se-

curely by turning clockwise.

Coupler Primary Hole

Upper Locking/ Attachment

Shaft Release

Guide Recess

Button

4DbWARNING: Inspect the area before

using the unit. Remove all debris and hard
objects such as rocks, glass, wire, etc., that

can ricochet, be thrown, or otherwise cause
injury or damage during operation.

Use your blower attachment for:

• Sweeping debris or grass clippings from
driveways, sidewalks, patios, etc.

• Blowing grass clippings, straw, or leaves into
piles, or removing debris from corners,

around joints, or between bricks.

Control air flow by directing the blower dis-
charge opening down or to one side. Always

work away from solid objects such as walks,
large stones, vehicles, and fences.

Clean corners by starting incorners and moving
outward. This will help prevent an accumulation

of debris which could fly into your face.

Be careful when working near plants. The force

of the air could damage tender plants.

-5-

_ WARNING;Always stop unit and dis-

connect spark plug wire (or disconnect pow-
erhead from power source) before performing
maintenance.

CHECK FOR LOOSE FASTENERS
AND PARTS

• Housing Screws

INSPECT AND CLEAN UNIT

AND LABELS

• After each use, inspect complete unit for
loose or damaged parts. Clean the unit and

labels using a damp cloth with a mild deter-
gent.

• Wipe off unit with a clean dry cloth.

Z_

rmWARNING: Perform the following

steps after each use:

• Allow attachment to cool before storing or
transporting.

• Store in a high, cool, dry, h_door area out of
reach of children.

Poulan PRO warrants to the original pur-
chaser that each new Poulan PRO brand

gasoline tool or attachment is free from de-
fects in material and workmanship and

agrees to repair or repIace under this war-
ranty any defective gasoline product or at-
tachment as follows from the original date of

purchase.
2 YEARS - Parts and Labor, when used for

household purposes.
90 DAYS - Parts and Labor, when used for
commercial, professional, or income produc-

ing purposes.
30 DAYS - Parts and Labor, if used for rental

purposes.
This warranty is not transferable and does not

cover damage or liability caused by improper
handling, improper maintenance, or the use
of accessories and/or attachments not spe-

cifically recommended by Poulan PRO for
this tool. Additionally, this warranty does not

cover tune-ups, spark pIugs, filters, cutting
line, or rotating head parts that will wear and

require replacement with reasonable use dur-
ing the warranty period. This warranty does
not cover predetivery setup or normal adjust-

ments explained in the instruction manual

SEASONAL STORAGE

Prepare attachment for storage at end of sea-

son or if it will not be used for 30 days or more.

If your blower attachment is to be stored for a
period of time:

• Clean the entire unit.

• inspect attachment for any loose or dam-
aged parts. Tighten any loose screws.

• Replace any damaged, worn or broken
parts.

• At the beginning of the next season, use
only fresh fuel having the proper gasoline to

oil ratio.

THIS WARRANTY GIVES YOU SPECIFIC

LEGAL RIGHTS, AND YOU MAY HAVE
OTHER RIGHTS WHICH VARY FROM
STATE TO STATE.

NO CLAIMS FOR CONSEQUENTIAL OR
OTHER DAMAGES WILL BE ALLOWED,
AND THERE ARE NO OTHER EXPRESS

WARRANTIES EXCEPT THOSE EX-

PRESSLY STIPULATED HEREIN.
SOME STATES DO NOT ALLOW LIMITA-

TIONS ON HOW LONG AN IMPLIED WAR-

RANTY LASTS OR THE EXCLUSION OR

LIMITATIONS OF INCIDENTAL OR CON-
SEQUENTIAL DAMAGES, SO THE ABOVE

LIMITATIONS OR EXCLUSION MAY NOT
APPLY TO YOU.

The policy of Poulan PRO is to continuously

improve its products. Therefore, Poulan

PRO reserves the right to change, modify, or
discontinue models, designs, specifications,

and accessories of all products at any time
without notice or obligation to any purchaser.

-6-