Pottery Barn Cameron Platform Base Assembly Instruction

pottery barn kids

CAMERON PLATFORM BASE

PRE-ASSEMBLY:

• Read all instructions before beginning assembly. The illustrations provided allow for easier assembly when
used in conjunction with the asse mbly instruction s.

• For your safety and ea se, assembly by two adults is recommended.

• Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work surface.

Use care as some parts or hardw a re may ha ve sh arp poin ts or edge s.

• Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.

• Use the parts and hardware lists to identify and separate each of the pieces included.

• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause

the bolts to misalign during assembly.

• The use of power tools for assembly is not recommended. Power tools can damage hardware or split wood.

PARTS INCLUDED:
(A) Platform Base – 1pc

PARTS REQUIRED:
Cameron Cubby (Sold separately)

TOOLS REQUIRED:
Philips Screwdriver (Not included)

HARDWARE INCLUDED:

(B) T-Shaped Bracket – 2pcs
ASSEMBLY INSTRUCTIONS:

1. Place a Cameron Cubby piece (sold separately) on the Platform Base (A). Align a T-Shaped Bracket (B)

on one side of the rear of the Cubby and Base pieces and secure with (6) Wood Screws (C). Repeat with
the other side with the remaining bracket and screws.

(C) Wood Scre w 3 x 12mm – 12pcs

A.

B

C

CARE INSTRUCTIONS:

• Dust often using a clean, soft, dry lint-free cloth.

• Blot spills imme diately, and wi p e wit h a c lean, damp, cloth.

• We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered

finish.

Thank you for your purchase.

stores | catalog | www.potterybarnkids.com

USA 1.800.290.8181

Page 1/1