Pottery Barn Cameron Cubby with Doors and Dividers Assembly Instruction

pottery barn kids

CAMERON CUBBY WITH ADJUSTABLE SHELF

IMPORTANT SAFETY INSTRUCTIONS:
Please read all instructions carefully before assembling.
For your safety, assembly by two people is recommended.

PRE-ASSEMBLY:

• Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work
surface, as this will avoid damaging any parts during assembly. The shipping box provides an ideal work
surface. Do not dispose of any contents until assembly is completed to avoid accidentally discarding small
parts or hardware.

• Use the parts and hardware lists above to identify and separate each of the pieces included.

• The illustrations provided allow for easier assembly when used in conjunction with the assembly

instructions.

• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may
cause the bolts to misalign during assembly.

• If using power tools to aid in assembly please use caution. Power tools can damage ha rdware or split
wood.

ASSEMBLY INSTRUCTIONS:

1. Secure the Left/Right Side Panel (C & D) to the Bottom Panel (B) using (4) Bolt (H), Spring Washer (I) and
Flat Washer (J). Make sure the slots on side panels are facing inwards. Slide the Back Panel (E) into the
slots of the assembled piece. (Fig. 1)

2. Place the Top Panel (A) on the assembled piece. Secure the Top Panel to the Left/Right Side Panel
using (4) Allen Bolt (H), Spring Washer (I) and Flat Washer (J). Check alignment and tighten all bolts.
(Fig. 2)

PARTS INCLUDED:
(A) Top Panel – 1pc

(B) Bottom Panel – 1pc
(C) Left Side Panel – 1pc
(D) Right Side Panel – 1pc
(E) Back Panel – 1pc
(F) Shelf – 1pc

TOOLS REQUIRED:
Phillips Screwdriver

(Not included)

HARDWARE LIST
(G) Allen Key
(H) Bolt ¼“ x 25mm

(I) Spring Washer 1/4“
(J) Flat Washer 1/4“

(K) Shelf Support
(L) Wood Screw 3 x 12mm - 16pcs
(M) Square Bracket

- 1pc

- 8pcs

- 4pcs

– 1pc

- 8pcs

- 8pcs

(N) T-Shape Bracket

– 2pcs

C.

E.

B.

D.

(Fig. 1)

A.

J.
I.

H.

G.

(Fig. 2)

3. Insert (4) Shelf Support (K) into the matching pre-drilled holes. Place the Shelf (F) on the Shelf Support
(K) (Fig. 3)

F.

4. When connecting to other stacking Cameron cubby piece, place a T-Shape Bracket (N) over the pre­drilled holes on back of the cubby pieces securing with (6) Wood Screw (L). Repeat with the other T­Shape Bracket (N) on the other side.

5. When connecting to side Cameron cubby piece, place a Square Bracket (M) over the pre-drilled holes
on the cubby pieces.

T-Shape
bracket

Wood
screw
(L)

(N)

Wood
Screw
(L)

Square
Bracket
(M)

CARE INSTRUCTIONS:

• Dust with a clean, soft cloth.

• Blot spills immediately, and wipe with a clean, damp, cloth.

• We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered

finish.

Thank you for your purchase

stores | catalog | www.potterybarnkids.com

USA 1.800.290.8181