Pottery Barn Cameron Cubby with Doors Assembly Instruction
pottery barn kids
(2)
cameron cubby with doors
cameron creativity cabinet with chalkboard / corkboard
IMPORTANT SAFETY INSTRUCTIONS:
Please read all instructions carefully before assembling.
For your safety, assembly by two people is recommended.
PARTS INCLUDED:
(1) Top Panel (A)
(1) Bottom Panel (B)
(1) Shelf (C)
(2) Door Panel (D)
(1) Left Side Panel (E-1)
(1) Right Side Panel (E-2)
(1) Back Panel (F)
PRE-ASSEMBLY:
• Remove all parts and hardware from the box and lay out on a clear, carpeted or scratch-free work surface. (The
shipping box provides an ideal work surface), this will avoid damaging any parts during assembly. Do not dispose
of any contents until assembly is completed to avoid accidentally discarding small parts or hardware.
• Use the parts and hardware lists above to identify and separate each of the pieces included.
• The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause th e
bolts to misalign during assembly.
• If using power tools to aid in assembly please use caution. Power tools can damage hardware or split wood.
ASSEMBLY INSTRUCTIONS:
1. Carefully attach the Right/Left Side Panels (E-1 & E-2) to the Shelf (C). Secure the Bottom Panel (B) to the
assembled piece using (4) Allen Bolts, Flat Washers & Spring Washers. Note: The correct order for the washers
to go on the Allen Bolt is: Spring Washer first, Flat Washer second. (Fig. 1)
TIP KIT PARTS:
(1) Plastic Restraint (M)
(2) Plastic Wall Brackets (N)
(2) Long Screws (L)
Short Screws (O)
HARDWARE ENCLOSED:
(1) Allen Key (G)
(8) ¼” x 30mm Allen Bolt (H)
(8) ¼” Spring Washer (I)
(8) ¼” Flat Washer (J)
(2) T-Shape Connecting Bracket (K)
(1) Square Connecting Bracket (S)
(16) 5/32” x 12mm Wooden Screws (T)
(2) Small Bolt (P)
(4) Plastic Cap (Q)
(2) Wooden Knob (R)
(Fig. 1)
Left Side Panel
E-1
Bottom Panel
B
Shelf
C
Right Side Panel
E-2
2. Slide the Back Panel (F) into the slots on the Side Panels as shown. (Fig. 2)
(Fig. 2)
Back Panel
F
3. Attach the Wooden Knobs (R) to the Door Panels (D) securing by Small Bolt (P) as shown. (Fig. 3)
(Fig. 3)
Door Panel
D
Small Bolt
P
R
Wood Knob
Loading...