Pottery Barn Cameron Corner Cubby and Base Set Assembly Instruction

pottery barn kids

CAMERON CORNER BASE

IMPORTANT SAFETY INSTRUCTIONS:
Please read all instructions carefully before assembling.
For your safety, assembly by two people is recommended.

PARTS INCLUDED:
(1) Top Panel (A)
(1) Bottom Panel (B)
(2) Front Side Panel (C)
(2) Back Side Panel (D)
(2) Inner Panel (E)
(1) Back Panel (F)

PRE-ASSEMBLY:

• Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface.
(The shipping box provides an ideal work surface), this will avoid damaging any parts during assembly. Do
not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.

• Use the parts and hardware lists above to identify and separate each of the pieces included.

• The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.

• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause

the bolts to misalign during assembly.

• If using power tools to aid in assembly please use caution. Power tools can damage hardware or split
wood.

ASSEMBLY INSTRUCTIONS:

1. Carefully attach the (2) Front Side Panels (C) to the (2) Back Side Panels (D).

2. Place these assembled panels onto the (1) Top Panel (A) using (8) Allen Bolts, Flat Washers & Spring
Washers to secure. Place (2) Inner Panel (E) on the Top Panel (A) using (4) Allen Bolts, Flat Washers &
Spring Washers to secure. Note: The correct order for the washers to go on the Allen Bolt is: Spring Washer
first, Flat Washer second. Please see diagram.

3. Reverse the product and lay the Top panel on the floor. Slide the Back Panel (F) into the slots on the
backside of the Side Panels.

4. Set the Bottom Panel (B) on the already assembled pieces and attach with remaining (4) Allen Bolts, Flat
Washers & Spring Washers. Then reverse the product to complete the assembly.

CARE INSTRUCTIONS:

• Dust with a clean, soft cloth.

• Avoid the use of chemicals and harsh cleaning a gents.

• Do not stand on the base.

HARDWARE ENCLOSED:
(1) Allen Key (G)
(20) ¼” x 30mm Allen Bolts (H)
(20) ¼” Spring Washer (I)
(20) ¼” Flat Washer (J)

Thank you for your purchase.

stores | catalog | www.potterybarnkids.com

TOOLS REQUIRED FOR ASSEMBLY:
(1) Allen Key, included (G)

1. 2.

3. 4.